

MCQOPTIONS
Saved Bookmarks
This section includes 1120 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.
751. |
What happens to the frequency if the number of pairs of poles increases? |
A. | Increases |
B. | Decreases |
C. | Remains the same |
D. | Becomes zero |
Answer» B. Decreases | |
752. |
The sign followed by the string of digits is called as ______ |
A. | Significant |
B. | Determinant |
C. | Mantissa |
D. | Exponent |
Answer» D. Exponent | |
753. |
Rennet is used in many milk products to produce a thicker bodied product. Natural rennet comes from? |
A. | Mines in Eastern China |
B. | Microscopic plants growing the ocean |
C. | Inside the stomach of young claves |
D. | Composted cow manure treated with UV rays |
Answer» D. Composted cow manure treated with UV rays | |
754. |
Which of the following expression is true in case of open circuit parameters? |
A. | V<sub>1</sub> = Z<sub>11</sub> V<sub>1</sub> + Z<sub>12</sub> I<sub>2</sub> |
B. | V<sub>1</sub> = Z<sub>11</sub>I<sub>1</sub> + Z<sub>12</sub> V<sub>2</sub> |
C. | V<sub>1</sub> = Z<sub>11</sub>I<sub>1</sub> + Z<sub>12</sub> I<sub>2</sub> |
D. | V<sub>2</sub> = Z<sub>11</sub>I<sub>1</sub> + Z<sub>12</sub> I<sub>2</sub> |
Answer» D. V<sub>2</sub> = Z<sub>11</sub>I<sub>1</sub> + Z<sub>12</sub> I<sub>2</sub> | |
755. |
p=9 |
A. | Output is suppressed but p=9 |
B. | Error |
C. | Nan |
Answer» D. | |
756. |
____ system call is used for positioning the offset pointer. |
A. | read |
B. | write |
C. | open |
D. | lseek |
Answer» E. | |
757. |
In case of AWJM of brittle materials, the material is removed due to crack formation. |
A. | True |
B. | False |
Answer» B. False | |
758. |
Upper frequency limit of FDM is constant. |
A. | True |
B. | False |
Answer» C. | |
759. |
Which matrix is used in the Rho/ Pi steps? |
A. | [(1 2 | 3 4)]<sup>t</sup> |
B. | [(0 2 | 1 4)]<sup>t</sup> |
C. | [(0 1 | 2 3)]<sup>t</sup> |
D. | [(1 3 | 2 4)]<sup>t</sup> |
Answer» D. [(1 3 | 2 4)]<sup>t</sup> | |
760. |
Which among the following methods is best suited for stainless steels? |
A. | Electric butt welding |
B. | Seam welding |
C. | Flux coated arc welding |
D. | Oxy-hydrogen welding |
Answer» B. Seam welding | |
761. |
Firewalk works by sending ________ & ________ packets. |
A. | UDP, HTTP |
B. | TCP, HTTP |
C. | ICMP, TCP |
D. | UDP, TCP |
Answer» E. | |
762. |
What is the % C content inCementiteFe3C? |
A. | 6.67% |
B. | 0.025% |
C. | 2.1% |
D. | 0.09% |
Answer» D. 0.09% | |
763. |
The first intermediate in cholesterol synthesis is |
A. | Mevalonate |
B. | Isoprene |
C. | Squalene |
D. | Ethylene |
Answer» B. Isoprene | |
764. |
The ferro-magnesium mineral which occurs in ultra-basic igneous rocks is |
A. | Magnesite |
B. | Olivine |
C. | Baryte |
D. | Corundum |
Answer» C. Baryte | |
765. |
P53 activates transcription of _________ |
A. | P5 |
B. | p27 |
C. | p21 |
D. | p35 |
Answer» D. p35 | |
766. |
The speed of the reciprocating pump is generally measured in ______ |
A. | Stokes.min |
B. | Stokes/min |
C. | rps |
D. | rp/s |
Answer» C. rps | |
767. |
The deadlock can be handled by |
A. | Removing the nodes that are deadlocked |
B. | Restarting the search after releasing the lock |
C. | Restarting the search without releasing the lock |
D. | Resuming the search |
Answer» C. Restarting the search without releasing the lock | |
768. |
Which of the following can be accessed by transfer vector approach of linking? |
A. | External data segments |
B. | External sub-routines |
C. | Data located in other procedure |
D. | All of the mentioned |
Answer» C. Data located in other procedure | |
769. |
What is the signal that are added to the localizer signal, if the beam is narrow, to provide signal coverage? |
A. | Localizer plus |
B. | Difference signal |
C. | Sum signal |
D. | Clearance signal |
Answer» E. | |
770. |
Control of users’ access to network resources through charges are main responsibilities of$ |
A. | Reactive Fault Management |
B. | Reconfigured Fault Management |
C. | Accounting Management |
D. | Security Management |
Answer» D. Security Management | |
771. |
Green shear strength is more than the Green compression strength. |
A. | True |
B. | False |
Answer» C. | |
772. |
According to TSCA a chemical substance maybe ______ |
A. | Organic or inorganic |
B. | Pollutant |
C. | Contaminant |
D. | Soluble |
Answer» B. Pollutant | |
773. |
In what cases can the medical data of the patient be disclosed? |
A. | In case of emergency |
B. | In case of legal issues |
C. | In case of celebrity deaths |
D. | In case of study purposes |
Answer» C. In case of celebrity deaths | |
774. |
Ductile fracture occurs due to _______ stress. |
A. | Direct |
B. | Shear |
C. | Compressive |
D. | Bending |
Answer» C. Compressive | |
775. |
Global positioning system uses _____ satellites in medium earth orbits to provide accurate position information. |
A. | 12 |
B. | 24 |
C. | 36 |
D. | 48 |
Answer» C. 36 | |
776. |
In which of the following rain gauging methods are the values of rainfalls of all stations added? |
A. | Arithmetic mean method |
B. | Thiesson method |
C. | Iso-hyetol method |
D. | Recording type |
Answer» B. Thiesson method | |
777. |
The expected value for the estimation variable (size), S, can be computed as a weighted average of the optimistic(Sopt), most likely (Sm), and pessimistic (Spess) estimates given as |
A. | EV = (Sopt + 4Sm + Spess)/4 |
B. | EV = (Sopt + 4Sm + Spess)/6 |
C. | EV = (Sopt + 2Sm + Spess)/6 |
D. | EV = (Sopt + 2Sm + Spess)/4 |
Answer» C. EV = (Sopt + 2Sm + Spess)/6 | |
778. |
Mobility depends on |
A. | concentration of impurity |
B. | temperature |
C. | electron efficient mass |
D. | all of the mentioned |
Answer» E. | |
779. |
Which procedure in the kernel allows the thread to wait until a specific resource is available? |
A. | synchronisation |
B. | scheduling |
C. | scheduling and synchronisation |
D. | lpc |
Answer» B. scheduling | |
780. |
What is the value of a+b+c-d? |
A. | 10 |
B. | 20 |
C. | 30 |
D. | 40 |
Answer» B. 20 | |
781. |
Which of the following materials are used as electrodes in EDM? |
A. | Graphite |
B. | Copper |
C. | Brass |
D. | All of the mentioned |
Answer» E. | |
782. |
Hydrogenation reactions are reversible. |
A. | True |
B. | False |
Answer» B. False | |
783. |
Which of the following statement is INCORRECT for gene knockout? |
A. | Non functional gene is introduced |
B. | Make gene inoperative |
C. | Introduction of functional gene in an organism |
D. | It can be used to study the effect of loss of gene |
Answer» D. It can be used to study the effect of loss of gene | |
784. |
___________ service discovers the virtual sensors ability. |
A. | Register |
B. | Resource Discovery |
C. | Unregister |
D. | Suspend |
Answer» C. Unregister | |
785. |
In time domain the measure of relative stability is: |
A. | Damping factor |
B. | Maximum peak overshoot |
C. | Damping factor and Maximum peak overshoot |
D. | Speed of response |
Answer» D. Speed of response | |
786. |
The permeability of a dielectric material in air medium will be |
A. | Absolute permeability |
B. | Relative permeability |
C. | Product of absolute and relative permeability |
D. | Unity |
Answer» B. Relative permeability | |
787. |
Which of the the following steps should be carried out using data types in SSIS for efficient results ? |
A. | Make data types as wide as possible so you will allocate more memory for your transformation |
B. | Do not perform excessive casting of data types |
C. | Do not watch precision issues when using the money, float, and decimal types |
D. | None of the mentioned |
Answer» C. Do not watch precision issues when using the money, float, and decimal types | |
788. |
What is the amount of carbon present in low carbon steel? |
A. | Less than 0.5% |
B. | Less than 0.7% |
C. | Less than 0.4% |
D. | Less than 0.2% |
Answer» E. | |
789. |
Why a pump that delivers slurry to a filtration unit at constant pressure not a positive displacement pump? |
A. | Because it operates at variable floe rate |
B. | Because it operates at constant flow rates |
C. | Because the time of flow is different |
D. | Because the time of flow is same |
Answer» C. Because the time of flow is different | |
790. |
In logic unit test, the boundaries of a given test can be controlled by using __________ |
A. | Objects |
B. | Mock objects |
C. | Controllers |
D. | Modules |
Answer» C. Controllers | |
791. |
In __________ joint, the two Timber pieces are placed touching each other and then wooden or iron fishplate are placed on the opposite faces. |
A. | Scarfed |
B. | Spliced |
C. | Fished |
D. | Lapped |
Answer» D. Lapped | |
792. |
For ordinary soil, which foundation can reduce cost? |
A. | Isolated |
B. | Arch |
C. | Ream pile |
D. | Combined |
Answer» C. Ream pile | |
793. |
The permissible flexural tensile stress in the insitu concrete at the: |
A. | Contact surface |
B. | Longitudinal surface |
C. | Zig zag surface |
D. | Dump surface |
Answer» B. Longitudinal surface | |
794. |
Which latest browser is able to detect CSS Grids? |
A. | Modernizr 3.5.0 |
B. | Modernizr 3.4.0 |
C. | Modernizr 3.2.0 |
D. | Modernizr 3.1.0 |
Answer» B. Modernizr 3.4.0 | |
795. |
What is the average degree of polymerization when styrene in polymerized using sodium naphthalene? (v is the average kinetic chain length) |
A. | 2v |
B. | v |
C. | 3v |
D. | v/2 |
Answer» B. v | |
796. |
The constant in the equation F = µN is called?$ |
A. | Knew |
B. | Proprietary Constant |
C. | Coefficient of dry friction |
D. | Coefficient of static friction |
Answer» E. | |
797. |
Which of the following CSS Property sets the pace of the transition to the next keyframe, as described in the previous section? |
A. | animation-timing-function |
B. | animation-pace-function |
C. | animation-transition-function |
D. | none of the mentioned |
Answer» B. animation-pace-function | |
798. |
What is the leading edge radius of LS-0417 airfoil? |
A. | 0.07c |
B. | 0.05c |
C. | 0.08c |
D. | 0.09c |
Answer» D. 0.09c | |
799. |
What is the kinematic error in gears? |
A. | Minimum error in gear rotation per gear revolution |
B. | Accumulated permissible error in gear rotation per gear revolution |
C. | Maximum error in gear rotation per gear revolution |
D. | Accumulated permissible error in gear rotation in two gear revolutions |
Answer» C. Maximum error in gear rotation per gear revolution | |
800. |
The Orificemeter readings are more accurate than Venturimeter. |
A. | True |
B. | False |
Answer» C. | |