1120 + Mcqs in Bank Page 15 McqOptions

701.	Linear meter with 1% accuracy must have _________
A.	100 divisions
B.	50 divisions
C.	200 divisions
D.	500 divisions
Answer» B. 50 divisions

Discussion

702.	An executing process must be loaded entirely in main memory. What kind of a memory organization is this?
A.	Physical
B.	Logical
C.	Structural
D.	Simple
Answer» E.

Discussion

703.	Which of the following are not usual places for nodes‚Äö√Ñ√∂‚àö√ë‚àö¬• location?$
A.	joints
B.	supports
C.	point of change in cross section
D.	inflection point of BMD
Answer» E.

Discussion

704.	The phenomenon of interpreting unwanted signals on J and K while Cp (clock pulse) is HIGH is called
A.	Parity error checking
B.	Ones catching
C.	Digital discrimination
D.	Digital filtering
Answer» C. Digital discrimination

Discussion

705.	Two stroke engines are liable to cause a ____________ consumption of lubricating oil.
A.	lighter
B.	heavier
C.	unpredictable
D.	none of the mentioned
Answer» C. unpredictable

Discussion

706.	When the electrons are aligned either parallel or antiparallel to the direction of external magnetic field, the electrons will precess about the axis at a frequency that is proportional to which of the following?
A.	Applied magnetic field
B.	Electron magnetic moment
C.	Applied magnetic field and electron magnetic moment
D.	Neither applied magnetic field not electron magnetic moment
Answer» D. Neither applied magnetic field not electron magnetic moment

Discussion

707.	If c be the fraction of the reciprocating parts of mass m to be balanced per cyclinder of a steam locomotive with crank radius r, angular speed ‚âà√¨‚àö¬¢, distance between centre lines of two cylinders a, then the magnitude of the maximum swaying couple is given by$
A.	1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® c / 2 mr‚âà√¨‚àö¬¢<sup>2</sup>a
B.	1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® c / ‚Äö√Ñ√∂‚àö‚Ä†‚àö‚àÇ2mr‚âà√¨‚àö¬¢<sup>2</sup>a
C.	‚Äö√Ñ√∂‚àö‚Ä†‚àö‚àÇ2(1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® c)mr‚âà√¨‚àö¬¢<sup>2</sup>a
D.	none of the mentioned
Answer» C. ‚Äö√Ñ√∂‚àö‚Ä†‚àö‚àÇ2(1 ‚Äö√Ñ√∂‚àö√ë‚àö¬® c)mr‚âà√¨‚àö¬¢<sup>2</sup>a

Discussion

708.	Generalization feature of a multilayer feedforward network depends on factors?
A.	architectural details
B.	learning rate parameter
C.	training samples
D.	all of the mentioned
Answer» B. learning rate parameter

Discussion

709.	The re gravelled course is checked at a distance of every.
A.	10 m
B.	20 m
C.	50 m
D.	100 m
Answer» E.

Discussion

710.	If there are multiple restriction sites for an enzyme in a given molecule, digestion is carried out in many steps. The initial digestion should be?
A.	complete
B.	partial
C.	carried out by a different enzyme then that the restriction site
D.	carried out by a mixture of restriction enzymes
Answer» C. carried out by a different enzyme then that the restriction site

Discussion

711.	In transfer moulding the powdered compounded plastic is in the chamber which is applied __________ temperature and ________ pressure.
A.	High, low
B.	Low, high
C.	Minimum, high
D.	Maximum, high
Answer» D. Maximum, high

Discussion

712.	When we will celebrate World Forestry Day?
A.	21 March
B.	22 April
C.	05 June
D.	11 July
Answer» B. 22 April

Discussion

713.	___________ allows uncommitted data to be read
A.	Read uncommitted
B.	Serializable
C.	Repeatable read
D.	Read committed
Answer» B. Serializable

Discussion

714.	Which of the following indicates the elevations directly?
A.	Level line
B.	Line of sight
C.	Datum
D.	Contour
Answer» E.

Discussion

715.	At high pressure super critical CO2 closed cycle gas turbine has ____________ efficiency when compared to helium closed cycle gas turbine.
A.	optimum
B.	high
C.	low
D.	none of the mentioned
Answer» D. none of the mentioned

Discussion

716.	The crystal resonator frequency will change according to operating time, this phenomenon is termed as
A.	Magnus effect
B.	Retrace
C.	Aging
D.	Moore‚Äö√Ñ√∂‚àö√ë‚àö¬•s effect
Answer» D. Moore‚Äö√Ñ√∂‚àö√ë‚àö¬•s effect

Discussion

717.	Which of the following architecture consists of independent processes or objects that communicate through messages?
A.	Independent Component architecture
B.	Heterogeneous Architectures
C.	Layered Architecture
D.	None of the mentioned
Answer» B. Heterogeneous Architectures

Discussion

718.	Which description is inappropriate ?
A.	A usecase is a type of agent that interacts with a product
B.	An actor is a type of complete interaction between product and its environment
C.	All of the mentioned
D.	None of the mentioned
Answer» D. None of the mentioned

Discussion

719.	You create a message listener to listen for JMS messages. This negates the need for the approach taken in BackOfficeImpl in previous recipes.
A.	True
B.	False
Answer» B. False

Discussion

720.	The first overtone of a stretched wire of given length is 320Hz. The first harmonic is
A.	320Hz
B.	160Hz
C.	480Hz
D.	640Hz
Answer» C. 480Hz

Discussion

721.	Resolution is _________
A.	change in measured value from the true value
B.	the amount of change in the input value for the corresponding change of 1 unit in the output value
C.	as the measure of the repeated accuracy
D.	all of the mentioned
Answer» C. as the measure of the repeated accuracy

Discussion

722.	Which test is more preferred for testing hardness of electroplated surface?
A.	Dynamic hardness test
B.	Scratch hardness test
C.	Macrohardness test
D.	Microhardness test
Answer» E.

Discussion

723.	The condition where reflux and stripping ratio approaches to infinity is called as
A.	Minimum reflux
B.	Total reflux
C.	Optimum ratio
D.	Feed ratio
Answer» C. Optimum ratio

Discussion

724.	The beads are provided in fractional column for
A.	Vapours to generate
B.	Vapours to condense
C.	Vapours to evaporate
D.	All of the mentioned
Answer» C. Vapours to evaporate

Discussion

725.	Heparin is a _______________
A.	Membrane
B.	Rate enhancer
C.	Antibody
D.	Detergent
Answer» E.

Discussion

726.	Which method is not adopted for volume calculating?
A.	From cross-section
B.	From spot level
C.	From contour
D.	From plan
Answer» E.

Discussion

727.	The first edition of a book uses ___________ dots per inch in which screen is aligned so that the rows and columns are at a 45¬¨¬®‚Äö√†√ª angle in the printed product.$
A.	200
B.	100
C.	150
D.	10
Answer» D. 10

Discussion

728.	A continuous time LTI system is invertible only when its inverse exists.
A.	True
B.	False
Answer» B. False

Discussion

729.	To avoid large chip, ________ devices are used.
A.	InGaAsP
B.	InGa
C.	GaAs
D.	InGaAs
Answer» B. InGa

Discussion

730.	Predictions solely based on hydrophobicity profiles have lowest error rates.
A.	True
B.	False
Answer» C.

Discussion

731.	INFORMATION_SCHEMA is not based on the SQL standard.
A.	True
B.	False
Answer» C.

Discussion

732.	The laminations used in the rotor body design is 1.8 mm?
A.	true
B.	false
Answer» B. false

Discussion

733.	Determine the output resistance of differential amplifier with three op-amp. The op-amp used is 741c, with A=200000 and Ro. The output and difference of input voltages are 44 and 11.
A.	5.5m‚âà√≠¬¨¬©
B.	3.5m‚âà√≠¬¨¬©
C.	2.4m‚âà√≠¬¨¬©
D.	1.5m‚âà√≠¬¨¬©
Answer» E.

Discussion

734.	Among all the lithographic techniques, interference lithography, nano-spheres lithography give better results.
A.	True
B.	False
Answer» B. False

Discussion

735.	Which of the following is not a function of snRNPs?
A.	5‚Äö√Ñ√∂‚àö√ë‚àö¬• splice site reorganization
B.	3‚Äö√Ñ√∂‚àö√ë‚àö¬• splice site reorganization
C.	Branch point site
D.	Catalyze 5‚Äö√Ñ√∂‚àö√ë‚àö¬• splice site cleavage
Answer» C. Branch point site

Discussion

736.	_________ resolution analog-to-digital converter is used in digitization of ECG signal in signal conditioning.
A.	16 bit
B.	12 bit
C.	32 bit
D.	64 bit
Answer» C. 32 bit

Discussion

737.	Calculate the axial stress induced in the pipe is the water mean of 1.5 metres diameter and 20 mm thick is subjected to an internal pressure of 1.5 N/mm2.
A.	28.125 N/mm<sup>2</sup>
B.	35.675 N/mm<sup>2</sup>
C.	46.785 N/mm<sup>2</sup>
D.	67.845 N/mm<sup>2</sup>
Answer» B. 35.675 N/mm<sup>2</sup>

Discussion

738.	In which modulation, frequency of carrier signal is varied with the amplitude of modulating signal?
A.	FM
B.	AM
C.	PM
D.	VSB
Answer» B. AM

Discussion

739.	The unit that performs scheduling of instructions by determining the data dependencies is
A.	fetch-decode unit
B.	dispatch-execute unit
C.	retire unit
D.	none
Answer» C. retire unit

Discussion

740.	Gastrulation occurs during the 2nd week of embryonic development.
A.	True
B.	False
Answer» B. False

Discussion

741.	What is the shape of the lymph nodes?
A.	tubular
B.	circular
C.	cuboidal
D.	ovoid
Answer» E.

Discussion

742.	M13 filamentous phage DNA molecule is smaller than the head-and-tail lambda phage.
A.	True
B.	False
Answer» B. False

Discussion

743.	The function of flame cell is ____________
A.	Excretion
B.	Digestion
C.	Respiration
D.	Reproduction
Answer» B. Digestion

Discussion

744.	Which of the following navigator object properties is the same in both Netscape and IE?
A.	navigator.appCodeName
B.	navigator.appName
C.	navigator.appVersion
D.	none of the mentioned
Answer» B. navigator.appName

Discussion

745.	The plugging braking gives the _____________
A.	Zero torque braking
B.	Smallest torque braking
C.	Highest torque braking
D.	Variable torque braking
Answer» D. Variable torque braking

Discussion

746.	For hard materials, ______ helix angle is used.
A.	small
B.	large
C.	zero
D.	none of the mentioned
Answer» B. large

Discussion

747.	Skempton observed that the factor Nc increases with the ratio___________
A.	D/B
B.	B/D
C.	H/Hc
D.	c/cm
Answer» B. B/D

Discussion

748.	What are the limitations of the semantic networks?
A.	Intractability
B.	Lack in expressing some of the properties
C.	Incomplete
D.	Has memory constraints
Answer» C. Incomplete

Discussion

749.	________ designed for an Internet work environment with small wireless cells.
A.	MMP
B.	RMDP
C.	RM2
D.	Mobicast
Answer» E.

Discussion

750.	Creep in belt drive is due to
A.	weak material of the belt
B.	weak material of the pulley
C.	uneven extensions and contractions of the belt when it passes from tight side to slack side
D.	expansion of the belt
Answer» D. expansion of the belt

Discussion

Explore topic-wise MCQs in Unit Processes.

Linear meter with 1% accuracy must have _________

An executing process must be loaded entirely in main memory. What kind of a memory organization is this?

Which of the following are not usual places for nodes‚Äö√Ñ√∂‚àö√ë‚àö¬• location?$

The phenomenon of interpreting unwanted signals on J and K while Cp (clock pulse) is HIGH is called

Two stroke engines are liable to cause a ____________ consumption of lubricating oil.

When the electrons are aligned either parallel or antiparallel to the direction of external magnetic field, the electrons will precess about the axis at a frequency that is proportional to which of the following?

If c be the fraction of the reciprocating parts of mass m to be balanced per cyclinder of a steam locomotive with crank radius r, angular speed ‚âà√¨‚àö¬¢, distance between centre lines of two cylinders a, then the magnitude of the maximum swaying couple is given by$

Generalization feature of a multilayer feedforward network depends on factors?

The re gravelled course is checked at a distance of every.

If there are multiple restriction sites for an enzyme in a given molecule, digestion is carried out in many steps. The initial digestion should be?

In transfer moulding the powdered compounded plastic is in the chamber which is applied __________ temperature and ________ pressure.

When we will celebrate World Forestry Day?

___________ allows uncommitted data to be read

Which of the following indicates the elevations directly?

At high pressure super critical CO2 closed cycle gas turbine has ____________ efficiency when compared to helium closed cycle gas turbine.

The crystal resonator frequency will change according to operating time, this phenomenon is termed as

Which of the following architecture consists of independent processes or objects that communicate through messages?

Which description is inappropriate ?

You create a message listener to listen for JMS messages. This negates the need for the approach taken in BackOfficeImpl in previous recipes.

The first overtone of a stretched wire of given length is 320Hz. The first harmonic is

Resolution is _________

Which test is more preferred for testing hardness of electroplated surface?

The condition where reflux and stripping ratio approaches to infinity is called as

The beads are provided in fractional column for

Heparin is a _______________

Which method is not adopted for volume calculating?

The first edition of a book uses ___________ dots per inch in which screen is aligned so that the rows and columns are at a 45¬¨¬®‚Äö√†√ª angle in the printed product.$

A continuous time LTI system is invertible only when its inverse exists.

To avoid large chip, ________ devices are used.

Predictions solely based on hydrophobicity profiles have lowest error rates.

INFORMATION_SCHEMA is not based on the SQL standard.

The laminations used in the rotor body design is 1.8 mm?

Determine the output resistance of differential amplifier with three op-amp. The op-amp used is 741c, with A=200000 and Ro. The output and difference of input voltages are 44 and 11.

Among all the lithographic techniques, interference lithography, nano-spheres lithography give better results.

Which of the following is not a function of snRNPs?

_________ resolution analog-to-digital converter is used in digitization of ECG signal in signal conditioning.

Calculate the axial stress induced in the pipe is the water mean of 1.5 metres diameter and 20 mm thick is subjected to an internal pressure of 1.5 N/mm2.

In which modulation, frequency of carrier signal is varied with the amplitude of modulating signal?

The unit that performs scheduling of instructions by determining the data dependencies is

Gastrulation occurs during the 2nd week of embryonic development.

What is the shape of the lymph nodes?

M13 filamentous phage DNA molecule is smaller than the head-and-tail lambda phage.

The function of flame cell is ____________

Which of the following navigator object properties is the same in both Netscape and IE?

The plugging braking gives the _____________

For hard materials, ______ helix angle is used.

Skempton observed that the factor Nc increases with the ratio___________

What are the limitations of the semantic networks?

________ designed for an Internet work environment with small wireless cells.

Creep in belt drive is due to

In transfer moulding the powdered compounded plastic is in the chamber which is applied __ temperature and pressure.