Explore topic-wise MCQs in Telecom.

This section includes 71 Mcqs, each offering curated multiple-choice questions to sharpen your Telecom knowledge and support exam preparation. Choose a topic below to get started.

1.

What is the Closed Loop power control frequency to adjust power levels in the AT or AN in the Reverse Link of an EVDO network?

A. 512 ms
B. 1.25 ms
C. 5 ms
D. None
Answer» C. 5 ms
2.

Choose a correct statement about Multi-packet transmissions using Hybrid ARQ technique in an EVDO network?

A. The data can be sent in any parts using multiple time slots at the same time or different time
B. Sending an early acknowledgement even before receiving all packets simply cancels sending the remaining packets by the AN (Access Node or BTS)
C. If there is no Acknowledgement about packets by the mobile (AT), all packets are sent and resent again and again withing permissible times.
D. All the above
Answer» E.
3.

What is the type of ARQ (Automatic Repeat Request) followed by a CDMA2000 1xEVDO network?

A. Hybrid ARQ
B. Redundancy ARQ
C. Incremental Redundancy Hybrid ARQ
D. None
Answer» D. None
4.

If a DRC number is more then the channel quality to receive high data rate is ___.

A. Less
B. More
C. -
D. -
Answer» C. -
5.

The Forward Link Scheduling algorithm is also called ___ as it guarantees minimum service to all users.

A. Hybrid Algorithm
B. Kries Algorithm
C. Proportional Fair algorithm
D. None
Answer» D. None
6.

A DRC-0 or Null Rate indicates?

A. Mobile (AT) can not take any data.
B. AT is handing off to another sector
C. A and B
D. None
Answer» D. None
7.

What does the number sent by a mobile device (AT) to the AN (BTS) indicate?

A. Error rate
B. Data Rate
C. Modulation rate
D. None
Answer» C. Modulation rate
8.

What is the range of a DRC (Digital Rate Control) channel?

A. 9-12
B. 13-24
C. 1-12
D. None
Answer» D. None
9.

Which channel tells the mobile (AT) about data being scheduled?

A. Control channel
B. Media Access Channel (MAC)
C. PICH
D. None
Answer» C. PICH
10.

What is the length of each Time Slot or Channel in a CDMA2000 1xEV-DO network architecture?

A. 1.667 ms
B. 4.166 ms
C. 8.235 ms
D. None
Answer» B. 4.166 ms
11.

Who gave the TIA-856 name to the 1xEV-DO standard?

A. ANSI
B. ITU
C. 3GPP
D. None
Answer» C. 3GPP
12.

Choose a correct statement about a 1xEVDO network.

A. Only Rate control is present in the forward link
B. Rate control is present in the Reverse link
C. Power control is present in the Reverse link
D. All
Answer» E.
13.

What are the Handoffs implemented in a CDMA2000 1x-EV-DO network?

A. Forward Virtual Soft Handoff
B. Reverse Soft Handoff
C. A and B
D. None
Answer» D. None
14.

Choose a correct statement about a 1xEV-DO network?

A. It uses 48 Order FIR Filter
B. It uses Turbo Code
C. Both A and B
D. None
Answer» D. None
15.

Choose a correct statement about CDMA2000 1x network.

A. It uses Convolution Code
B. It uses Turbo Code
C. It uses 48 Order FIR filter.
D. All
Answer» E.
16.

What are the handoffs implemented in a CDMA2000 1x network?

A. Soft Forward and Soft Reverse handoffs
B. Hard Forward and Hard Reverse Handoffs
C. Both A and B
D. None
Answer» D. None
17.

What are the channels used in a CDMA 1xEVDO network?

A. Access channels similar to CDMA2000 1x systems
B. Similar to Enhanced Access channels of CDMA2000 1x
C. DeAccess channels
D. None
Answer» B. Similar to Enhanced Access channels of CDMA2000 1x
18.

State TRUE or FALSE. A CDMA2000 1x network follows the same CDM technique in both Forward and Reverse links.

A. FALSE
B. TRUE
C. -
D. -
Answer» C. -
19.

State TRUE of FALSE. A CDMA2000 1x network follows Fast Power control in both Forward and Reverse links.

A. FALSE
B. TRUE
C. -
D. -
Answer» C. -
20.

State TRUE or FALSE. A CDMA2000 1x network has no Rate control.

A. FALSE
B. TRUE
C. -
D. -
Answer» C. -
21.

What is the channel used to send UATI request by the AT to AN for rate adaption?

A. Access channel
B. Dedicated channel
C. Power control channel
D. None
Answer» B. Dedicated channel
22.

The technology that allows an AT in a 1xEV-DO network to choose a data rate from 38.4 Kbps to 3.1 Mbps using a UATI request is called?

A. Dynamic Modulation Coding
B. Adaptive Modulation Coding
C. Bipolar Modulation Coding
D. None
Answer» C. Bipolar Modulation Coding
23.

A Virtual Soft Handoff in a 1xEVDO system works in ___ way.

A. Forward
B. Reverse
C. Both Forward and Reverse
D. None
Answer» B. Reverse
24.

What is the name of Soft Handoff in which the Mobile Station (AT - Access Terminal) does not exchange any signalling with AT to move from one Sector to the other Sector for good data rate?

A. Very Soft Handoff
B. Virtual Soft Handoff
C. Adaptive Soft Handoff
D. None
Answer» C. Adaptive Soft Handoff
25.

After measuring C/I (Carrier to Interference Ratio), AT (Mobile) informs to AN (BTS) about the acceptable highest data rate through ___ channel.

A. DCCH
B. PICH
C. DRC
D. BCCH
Answer» D. BCCH
26.

The process of Scheduling forward link data to all users aiming to achieve maximum throughput is called?

A. Equalisation
B. Forward Link Scheduling
C. Forward Pooling Strategy
D. None
Answer» C. Forward Pooling Strategy
27.

In a 1xEV-DO network, Reverse Links are implemented with ___ multiplexing.

A. Time Division
B. Code Division
C. Time Division and Code Division
D. None
Answer» C. Time Division and Code Division
28.

EVDO implements Time Division Multiplexing for its ___ Links.

A. Forward Link
B. Reverse Link
C. Both Forward and Reverse Links
D. None
Answer» B. Reverse Link
29.

What is the Multiplexing technique followed by an 1xEV-DO network?

A. FDM (Frequency Division Multiplexing)
B. PDM (Phase Division Multiplexing)
C. TDM (Time Division Multiplexing)
D. None
Answer» D. None
30.

What are the possible data rates available in a CDMA2000 1xEV-DO network?

A. 38.4, 153.6 and 307.2 Kbps
B. 76.8, 614.4 and 921.5 Kbps
C. 1228.8, 1843.2 and 2457.6 Kbps
D. All
Answer» E.
31.

How many different data rates which are multiples of 38.4 kbps are available in an EVDO network?

A. 5
B. 9
C. 14
D. 21
Answer» C. 14
32.

What are the techniques or mechanisms followed to avoid too many users transmitting at a high data rate towards the AN (Access Node or BTS) and crashing the system?

A. Unicast Reverse Rate Limit (URRL)
B. Broadcast Reverse Rate Limit (BRRL)
C. By Restricting the maximum rate of AT(Mobiles)s to a level below 307.2 Kbps.
D. All the above
Answer» E.
33.

What is the advantage of Reverse Link Power Control (Dynamic power control) in an EVDO network?

A. It increases Signal to Noise Ration (SNR)
B. All Mobiles transmit controlled power towards the AN.
C. System capacity is increased
D. All the above
Answer» E.
34.

CDMA2000 1xEV-DO follows ___ power control for Reverse channels.

A. Fixed
B. Dynamic
C. No power control
D. -
Answer» C. No power control
35.

What is the maximum data rate of an EV-DO Reverse Channel?

A. 512 Kbps
B. 1.2 Mbps
C. 1.8 Mbps
D. 2 Mbps
Answer» D. 2 Mbps
36.

State TRUE or FALSE. CDMA2000 1x and CDMA2000 1xEV-DO have different channel structure.

A. FALSE
B. TRUE
C. -
D. -
Answer» C. -
37.

What is the maximum data rate of a Forward Channel?

A. 1.2 Mbps
B. 2.4 Mbps
C. 3.1 Mbps
D. 3.6 Mbps
Answer» D. 3.6 Mbps
38.

Selecting a data rate for a Forward Channel or Reverse Channel is based on the ___ Ratio.

A. A/B
B. VSWR
C. C/I
D. None
Answer» D. None
39.

In an EVDO network, all users of the same Sector share ___ in a TDMA mode.

A. Channel
B. Frequency
C. Code
D. None
Answer» B. Frequency
40.

In an EVDO network, which selects a possible highest data rate between AT and AN?

A. AT (Mobile)
B. AN (BTS)
C. BSC
D. MSC
Answer» B. AN (BTS)
41.

Forward channels in a CDMA2000 1xEV-DO transmit data at ___ rate.

A. Half rate
B. Full rate
C. Variable-rate
D. None
Answer» D. None
42.

In a CDMA2000 1xEV-DO network, Forward channels always transmit at ____ power.

A. Half power
B. Variable Power
C. Full Power
D. None
Answer» D. None
43.

What is the basic data rate (Minimum data rate) in an EV-DO network?

A. 32 Kbps
B. 38.4 Kbps
C. 56 Kbps
D. 64 Kbps
Answer» C. 56 Kbps
44.

A Reverse Channel works from ___ to ___.

A. AN to AT
B. AT to AN
C. BTS to MSC
D. None
Answer» C. BTS to MSC
45.

A Forward Channel works from ___ to ___.

A. AT to AN
B. AN to AT
C. BTS to MSC
D. None
Answer» C. BTS to MSC
46.

What do AN and AT stand for?

A. AN = Access Network, AT = Access Terminal
B. AN = Asynchronous Node, AT = Asynchronous Terminal
C. AN = Access Node, AT = Access Terminal
D. None
Answer» D. None
47.

High Rate Packet Data Access (HRPDA) of a EV-DO Rev-A provided good data rates due to _____ techniques.

A. Spread Carrier
B. Mobility Management
C. Both SC (Spread Carrier) and MM (Mobility Management)
D. None
Answer» D. None
48.

The UMB (Ultra Mobile Broadband) used ____ technology similar to LTE networks.

A. Single Carrier
B. OFDMA
C. TDMA
D. Multiple Carrier
Answer» C. TDMA
49.

What is the other name given to EV-DV in the year 2006?

A. LTE (Long Term Evolution)
B. UMB (Ultra Mobile Broadband)
C. UMB Advanced
D. LTE Advanced
Answer» C. UMB Advanced
50.

EV-DV stands for ___.

A. Evolution-Data Variable
B. Evolution-Data Versatile
C. Evolution Data and Voice
D. Enhanced Data and Voice
Answer» D. Enhanced Data and Voice