While finding the parameters for an alternator, its voltage regulation – McqOptions

MCQOPTIONS

1.	While finding the parameters for an alternator, its voltage regulation is found to be negative. Then the load connected to it must be __________
A.	capacitive nature
B.	inductive nature
C.	resistive nature
D.	can not be judged based on voltage regulation
Answer» B. inductive nature

Discussion

No Comment Found

Related MCQs

For obtaining maximum current when we conduct the Slip Test on a synchronous machine, its armature field will align along __________
for a synchronous motor, its power factor __________
While finding the parameters for an alternator, its voltage regulation is found to be negative. Then the load connected to it must be __________
For a 400 V, 3 phase alternator gives an open circuit voltage of 380V and armature current of 38A at a field current of 20A. Then the synchronous reactance of the machine is?
Mark the correct expression for alternator working at a lagging power factor.
A salient pole synchronous generator has following per-unit parameter Xd = 1.2 pu, Xq = 0.8pu, ra = 0.25 ohms. Then the armature current at 0.8 lagging is?
If the internal pf angle of a synchronous motor is 30 degree. Then the quadrature axis component of the armature is?
If the internal power factor angle of synchronous motor is 30 degree. Then the direct-axis component of the armature current will be __________
In salient-pole machines, the armature mmf cannot be accounted for by introducing one equivalent reactance due to __________