When the tensile stresses are developed in the cracks, they are visibl – McqOptions

MCQOPTIONS

1.	When the tensile stresses are developed in the cracks, they are visible at ____________
A.	Hoop stress of beams
B.	Soffit of beams
C.	Sagging of beams
D.	Hogging of beams
Answer» C. Sagging of beams

Discussion

No Comment Found

Related MCQs

The formulae for load factor against cracking is ____________
The widths of the cracks are influenced by ____________
The cracks appear when the tensile stresses at the soffit are equal to ____________
When the tensile stresses are developed in the cracks, they are visible at ____________
A rectangular concrete beam of cross section 100mm wide and 400mm deep is prestressed by a straight cable of span 6m, imposed load is 3.14kn/m, area is 36 10<sup>3</sup>mm<sup>2</sup>(Z=18 10<sup>5</sup>mm<sup>3</sup>). Calculate working moment assuming the self weight of concrete as 24kn/m<sup>3</sup>?
A rectangular concrete beam of cross section 120mm wide and 300mm deep is prestressed by a straight cable, effective force of 180kn at an eccentricity 50, area of 36 103mm2(z=18 105mm3). Find the total stress due to prestress?
When the loads in a concrete member are further increased than permitted, the crack widths are of an order of limit?
The micro cracks develop as soon as the tensile strain in concrete exceeds about ____________
The compressive and tensile stresses developed in cracking moments are due to ____________
The soffit of the beam after the transfer of prestress to concrete will be under ____________