The temperatures on the two sides of a plane wall are t1 and t2 and thermal conductivity of the wall material is prescribed by the relationK = k0 e^(-x/δ)Where, k0 is constant and δ is the wall thickness. Find the relation for temperature distribution in the wall?

t 1 – t x / t 1 – t 2 = δ/x

t 1 – t x / t 1 – t 2 = x/δ

The temperatures on the two sides of a plane wall are t1 and t2 and th

1.	The temperatures on the two sides of a plane wall are t1 and t2 and thermal conductivity of the wall material is prescribed by the relationK = k0 e^(-x/δ)Where, k0 is constant and δ is the wall thickness. Find the relation for temperature distribution in the wall?
A.	t 1 – t x / t 1 – t 2 = x
B.	t 1 – t x / t 1 – t 2 = δ
C.	t 1 – t x / t 1 – t 2 = δ/x
D.	t 1 – t x / t 1 – t 2 = x/δ
Answer» E.

Discussion

No Comment Found

Related MCQs

A cable of 10 mm outside is to be laid in an atmosphere of 25 degree Celsius (h = 12.5 W/m² degree) and its surface temperature is likely to be 75 degree Celsius due to heat generated within it. How would the heat flow from the cable be affected if it is insulated with rubber having thermal conductivity k = 0.15 W/m degree?
The inner and outer surfaces of a furnace wall, 25 cm thick, are at 300 degree Celsius and 30 degree Celsius. Here thermal conductivity is given by the relationK = (1.45 + 0.5 * 10¯⁵ t²) KJ/m hr degWhere, t is the temperature in degree centigrade. Calculate the heat loss per square meter of the wall surface area?
Chose the correct one with respect to critical radius of insulation
The unit of thermal conductivity doesn’t contain which parameter?
A pipe of outside diameter₂0 mm is to be insulated with asbestos which has a mean thermal conductivity of 0.1 W/m degree. The local coefficient of convective heat to the surroundings is 5 W/square meter degree. Find the critical radius of insulation for optimum heat transfer from pipe?
For insulation to be properly effective in restricting heat transmission, the pipe radius r0 will be
The value of critical radius in case of cylindrical hollow object is
A wire of radius 3 mm and 1.25 m length is to be maintained at 60 degree Celsius by insulating it by a material of thermal conductivity 0.175 W/m K. The temperature of surrounding is 20 degree Celsius with heat transfer coefficient 8.5 W/ m² K. Find percentage increase in heat loss due to insulation?
A heat exchanger shell of outside radius 15 cm is to be insulated with glass wool of thermal conductivity 0.0825 W/m degree. The temperature at the surface is 280 degree Celsius and it can be assumed to remain constant after the layer of insulation has been applied to the shell. The convective film coefficient between the outside surface of glass wool and the surrounding air is estimated to be 8 W/m² degree. What is the value of critical radius?
“Radiation cannot be affected through vacuum or space devoid of any matter”. True or false

The temperatures on the two sides of a plane wall are t1 and t2 and thermal conductivity of the wall material is prescribed by the relationK = k0 e^(-x/δ)Where, k0 is constant and δ is the wall thickness. Find the relation for temperature distribution in the wall?

Discussion

No Comment Found

Related MCQs

Reply to Comment