The most common method of wire wrapping for circular tanks consists of – McqOptions

MCQOPTIONS

1.	The most common method of wire wrapping for circular tanks consists of __________
A.	VBR machine
B.	Slump cone
C.	Cassagrande apparatus
D.	Traction machine
Answer» E.

Discussion

No Comment Found

Related MCQs

Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm<sup>2</sup> are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm<sup>2</sup> are to be used for vertical prestressing?
Calculate circumferential prestress of a cylindrical prestressed concrete water tank given that the thickness is 12mm, loss ratio is 0.75, the maximum stress under working pressure is 1n/mm<sup>2</sup>(N<sub>d</sub> value is 720)?
Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm<sup>2</sup> and the maximum compressive stress under working pressure is 1n/mm<sup>2</sup> and the loss ratio is 0.75?
The most common method of wire wrapping for circular tanks consists of __________
In the fixed base joint the junction is between the tank wall and __________
In the case of large tanks, the base slabs is subdivided by __________
The metal linear concept in prestressed tanks has proved to be success in case of __________
Prestressed concrete although it is water tight, it is not __________
Prestressed concrete tanks have been widely used for the storage of __________