The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.

The desired hydraulic efficiency of a Kaplan turbine is 98% at a whir

1.	The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.
A.	40
B.	60
C.	80
D.	30
Answer» E.

Discussion

No Comment Found

Related MCQs

In Kaplan turbine apparatus, the volume flow rate of water in 15 m3/s at an available head of 55 m (g = 10 m/s2). Find the shaft power (in MW) if the overall efficiency of the turbine is 95%.
In a Kaplan Turbine experimental setup, the power output of the shaft is 4.325 MW. The volume flow rate of water in 15 m3/s at an available head of 50 m. Find the overall efficiency of the turbine in % (g = 10 m/s2)?
The whirl velocity at inlet of a Kaplan turbine is 7.5 m/s and blade velocity is 5 m/s. The volume flow rate of water in 20 m3/s. Find the power output available at the shaft if the mechanical efficiency is 93% (in MW)?
The power available at the shaft of a Kaplan turbine is 0.75 MW. The volume flow rate of water in 15 m3/s, whirl velocity at inlet is 12 m/s and blade velocity is 5 m/s. Find the mechanical efficiency (in %)?
Which of the following efficiencies for Kaplan Turbine is defined as the ratio between the power available at the shaft of the turbine to the power produced by the runner?
In a Kaplan turbine experiment, the volumetric efficiency of a given turbine is 91%. If volume flow rate of water in given to be 35 m3/s, find the volume of water (m3) NOT flowing over the runner blades per second?
A student reports the volumetric efficiency of a Kaplan turbine to be 95%. If he measures the volume flow rate through the turbine is 40 m3/s. What is the flow rate of water over the runner blades (in m3/s)?
The volume flow rate into a Kaplan turbine is Q m3/s. 0.10Q m3/s volume of water do not flow over the runner blades. What further information is required to find the volumetric efficiency (numerical value) of the Kaplan turbine?
The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.
For a Kaplan turbine, the whirl velocity at inlet of the turbine is given to be 18 m/s. The blade velocity is given as 25 m/s. What is the hydraulic efficiency for a head of 50 m. Take g = 10 m/s2?

The desired hydraulic efficiency of a Kaplan turbine is 98% at a whirl velocity of 20 m/s and a head of 60 m. What should be the blade velocity of the turbine at inlet in m/s? Take g = 10 m/s2.

Discussion

No Comment Found

Related MCQs

Reply to Comment