The current through an electrical conductor is 1A when the temperature of the conductor 0°C and 0.7 A when the temperature is 100°C. The current when the temperature of the conductor is 1200°C is ___________

The current through an electrical conductor is 1A when the temperatur

1.	The current through an electrical conductor is 1A when the temperature of the conductor 0°C and 0.7 A when the temperature is 100°C. The current when the temperature of the conductor is 1200°C is ___________
A.	0.08 A
B.	0.16 A
C.	0.32 A
D.	0.64 A
Answer» C. 0.32 A

Discussion

No Comment Found

Related MCQs

In the circuit given below, bulb X uses 48 W when lit, bulb Y uses 22 W when lit and bulb Z uses 14.4 W when lit. The number of additional bulbs in parallel to this circuit, that would be required to below the fuse is _______________
In the circuit given below, the value of the voltage source E is _______________
For the circuit given below, what is the value of the Q factor for the inductor?
In a series resonant circuit, VC = 300 V, VL = 300 V and VR = 100 V. What is the value of the source voltage?
In the circuit given below, the resonant frequency is _______________
A capacitor of capacitance 50 μF is connected in parallel to another capacitor of capacitance 100 μF. They are connected across a time-varying voltage source. At a particular time, the current supplied by the source is 5 A. The magnitude of instantaneous current through the capacitor of capacitance 100 μF is?
A capacitor of capacitance 50 μF is connected in parallel to another capacitor of capacitance 100 μF. They are connected across a time-varying voltage source. At a particular time, the current supplied by the source is 5 A. The magnitude of instantaneous current through the capacitor of capacitance 50 μF is?
The resistance of copper motor winding at t=20°C is 3.42 Ω. After extended operation at full load, the motor windings measures 4.22 Ω. If the temperature coefficient is 0.0426, what is the rise in temperature?
An air capacitor of capacitance 0.005 μF is connected to a direct voltage of 500 V. It is disconnected and then immersed in oil with a relative permittivity of 2.5. The energy after immersion is?
When a DC voltage is applied to an inductor, the current through it is found to build up in accordance with I = 20(1-e-50t). After the lapse of 0.02 s, the voltage is equal to 2 V. What is the value of inductance?

The current through an electrical conductor is 1A when the temperature of the conductor 0°C and 0.7 A when the temperature is 100°C. The current when the temperature of the conductor is 1200°C is ___________

Discussion

No Comment Found

Related MCQs

Reply to Comment