The current passing through a galvanometer is 30 mA, resistance of the galvanometer is 50 and a shunt is 1 is connected to the galvanometer. What is the maximum current that can be measured by this ammeter?

The current passing through a galvanometer is 30 mA, resistance of the

1.	The current passing through a galvanometer is 30 mA, resistance of the galvanometer is 50 and a shunt is 1 is connected to the galvanometer. What is the maximum current that can be measured by this ammeter?
A.	1.53 A
B.	15.3 A
C.	0.153 A
D.	153 A
Answer» B. 15.3 A

Discussion

No Comment Found

Related MCQs

In a galvanometer 15% of the total current in the circuit passes through it. If the resistance of the galvanometer is G, then find out the shunt resistance S that is connected to the galvanometer.
The current passing through a galvanometer is 30 mA, resistance of the galvanometer is 50 and a shunt is 1 is connected to the galvanometer. What is the maximum current that can be measured by this ammeter?
What is the value of the shunt resistance (S) required if a galvanometer has a resistance f 50 and a maximum of 0.05A current that can be passed through it? The ammeter range is changed to 20 A.
A moving coil galvanometer has the following characteristics Number of turns of coil = 50; Area of coil = 70 mm<sup>2</sup>; Resistance of coil = 30 ; Flux density of radial field = 0.1 T; Torsional constant of suspension wire = 7 10<sup>-8</sup> N m/rad. Calculate the current and voltage sensitivity.
When 0.010A current flows through a moving coil galvanometer, it gives full deflection. Then, it is converted into a voltmeter which gives a reading of 10 V using an external resistance of 950 . What is the resistance of the galvanometer (G)?
A galvanometer has resistance of 10 ohms and a full scale deflection is produced by 5 milli amperes. What is the value of resistance that should be connected in series with it in order to enable it to read 2V?
An ideal ammeter has infinite resistance and an ideal voltmeter has zero resistance.
What should be the value of shunt resistance of the ammeter in order to increase its range?
How is galvanometer converted into a voltmeter?
How is a galvanometer converted into an ammeter?

The current passing through a galvanometer is 30 mA, resistance of the galvanometer is 50 and a shunt is 1 is connected to the galvanometer. What is the maximum current that can be measured by this ammeter?

Discussion

No Comment Found

Related MCQs

Reply to Comment