Metalling of road usually consists of ______ layers of coats. – McqOptions

MCQOPTIONS

1.	Metalling of road usually consists of ______ layers of coats.
A.	5
B.	3
C.	2
D.	6
Answer» C. 2

Discussion

No Comment Found

Related MCQs

Symbol shown below represents ______________ type of road signal.
_____________ curves are curves which, when viewed from the side, are concave upwards. This includes vertical curves at valley bottoms, but it also includes locations where an uphill grade becomes steeper, or a downhill grade becomes less steep.
Symbol shown below represents ______ sign.
Road on the side of a cliff or mountain, with the ground rising on one side and falling away on the other is called _________
A road junction where typically three or more roads are joined by a circular section of road is called _________
Below symbols refer to ____________
Calculate the quantity of cement concrete for cement concreting one kilometre length of 3.70 m wide road for an 8 cm thick layer. Also calculate cost at the rate of Rs.375.00 per cu m.
Calculate the quantity of metal required for a 3.70 m wide Macadam road for one kilometre length for one layer of 8 cm compacted thickness.
<p>ROAD_ON_THE_SIDE_OF_A_CLIFF_OR_MOUNTAIN,_WITH_THE_GROUND_RISING_ON_ONE_SIDE_AND_FALLING_AWAY_ON_THE_OTHER_IS_CALLED__________?$</p>
_____________curves are curves which, when viewed from the side, are concave upwards. This includes vertical curves at valley bottoms, but it also includes locations where an uphill grade becomes steeper, or a downhill grade becomes less steep.$