______________ is used in the specification of optical detectors – McqOptions

MCQOPTIONS

1.	______________ is used in the specification of optical detectors
A.	Noise equivalent power
B.	Polarization
C.	Sensitivity
D.	Electron movement
Answer» B. Polarization

Discussion

No Comment Found

Related MCQs

APDs do not operate at signal wavelengths between 1.3 and 1.6μm.
_________________ APDs are recognized for their high gain-bandwidth products.
__________ determines a higher transmission rate related to the gain of the APD device.
For silicon APDs, the value of excess noise factor is between _________
____________ is dependent upon the detector material, the shape of the electric field profile within the device.
______________ is used in the specification of optical detectors.
________________ is a combination of shunt capacitances and resistances.
In a silicon p-i-n photodiode, if load resistance is 4 kΩ, temperature is 293 K, bandwidth is 4MHz, find the thermal noise in the load resistor.
A silicon p-i-n photodiode incorporated in an optical receiver has following parameters: Compute the photocurrent in the device.
FOR_SILICON_APDS,_THE_VALUE_OF_EXCESS_NOISE_FACTOR_IS_BETWEEN__________?$