In the circuit given below, the value of ZL for maximum power to be t

1.	In the circuit given below, the value of ZL for maximum power to be transferred is _____________
A.	R
B.	R + jωL
C.	R – jωL
D.	jωL
Answer» D. jωL

Discussion

No Comment Found

Related MCQs

12, 1 H inductors are used as edge to form a cube. The inductance between two diagonally opposite corners of the cube is ____________
The discharge of a capacitor through a ballistic galvanometer produces a damped frequency of 0.125 Hz and successive swings of 120, 96 and 76.8 mm. The logarithmic decrement is?
A rectifier type AC voltmeter consists of a series resistance R, an ideal full-wave rectifier bridge and a PMMC instrument. A DC current of 1 mA produces a full-scale deflection of the instrument. The resistance of the instrument is 100 Ω. A voltage of 100 V (rms) is applied to the input terminals. The value of R required is?
A current I given by I = – 8 + 6\(\sqrt{2}\) (sin (ωt + 30°)) A is passed through three meters. The respective readings (in ampere) will be?
A 10 V is connected across a load whose V-I characteristics is given by 7I = V2 + 2V. The internal resistance of the battery is of magnitude 1Ω. The current delivered by the battery is ____________
In the circuit given below, the value of ZL for maximum power to be transferred is _____________
A relay coil having voltage of magnitude 210 V and frequency 50 Hz is connected to a 210 V, 50 Hz supply. If it has resistance of 50 Ω and an inductance of 0.2 H, the apparent power is _____________
An inductive coil connected to a 200 V, 50 Hz AC supply with 10 A current flowing through it dissipates 1000 W. The value of the impedance Z and Reactance XL are respectively ____________
An inductive coil connected to a 200 V, 50 Hz AC supply with 10 A current flowing through it dissipates 1000 W. Which of the following will have least value?
A voltage having the waveform of a sine curve is applied across a capacitor. When the frequency of the voltage is increased, what happens to the current through the capacitor?

In the circuit given below, the value of ZL for maximum power to be transferred is _____________

Discussion

No Comment Found

Related MCQs

Reply to Comment