If the received power at antenna terminals is -80dBm, and if the input noise power is -115 dBm, then the input SNR is:

If the received power at antenna terminals is -80dBm, and if the input

1.	If the received power at antenna terminals is -80dBm, and if the input noise power is -115 dBm, then the input SNR is:
A.	45 dB
B.	-195 dB
C.	-35 dB
D.	35 dB
Answer» E.

Discussion

No Comment Found

Related MCQs

If the received power at the antenna terminals is Si=-80 dBm and the output noise power is -110 dBm then the output signal to noise ratio is given by:
A receiver system is operating at a bandwidth of 1 MHz and has a total system noise temperature of 762 K. then the output noise power is:
If a transmission line connecting the antennas to the receiver has a loss of 1.5 dB, given the physical temperature is 270C, noise equivalent temperature is:
In a receiver, if the noise figure of the mixer stage in the receiver is 7 dB, then the equivalent noise temperature is given that the receiver is operating at 290 K:
IF_THE_RECEIVED_POWER_AT_THE_ANTENNA_TERMINALS_IS_SI=-80_DBM_AND_THE_OUTPUT_NOISE_POWER_IS_-110_DBM_THEN_THE_OUTPUT_SIGNAL_TO_NOISE_RATIO_IS_GIVEN_BY:?$
A receiver system is operating at a bandwidth of 1 MHz and has a total system noise temperature of 762 K. then the output noise power is?
If the received power at antenna terminals is -80dBm, and if the input noise power is -115 dBm, then the input SNR is:
Antenna noise temperature of a system is 210 K, noise temperature of transmission line is 123 K, loss of a transmission line connecting the antenna to receiver is 1.41 and noise temperature of the receiver cascade is 304 K. then the total system noise temperature is:
If a receiver is operating at a bandwidth of 1 MHz and has antenna noise temperature of 210 K, then the input noise power is:
Given that the antenna efficiency is 0.9, equivalent brightness temperature is 200 K; physical temperature is 300 K, noise temperature of an antenna is:

If the received power at antenna terminals is -80dBm, and if the input noise power is -115 dBm, then the input SNR is:

Discussion

No Comment Found

Related MCQs

Reply to Comment