For conducting a Standard Proctor Compaction Test, the weight of hammer (P in kg), the fall of hammer (Q in mm), the number of blows per layer (R) and the number of layers (S) required are respectively.

For conducting a Standard Proctor Compaction Test, the weight of hamme

1.	For conducting a Standard Proctor Compaction Test, the weight of hammer (P in kg), the fall of hammer (Q in mm), the number of blows per layer (R) and the number of layers (S) required are respectively.
A.	P - 5.89 Q - 550 R - 50 S - 3
B.	P - 4.89 Q - 450 R - 25 S - 3
C.	P - 3.60 Q - 310 R - 35 S - 4
D.	P - 2.60 Q - 310 R - 25 S - 3
Answer» E.

Discussion

No Comment Found

Related MCQs

On the same soil sample, both Standard and Modified Proctor compaction tests are conducted in the laboratory. The values of Optimum Moisture Content (OMC) and Maximum Dry Density (MDD) for modified test compared to those for standard compaction test will respectively
For standard compaction test done on soil, the mass of hammer and drop of the hammer are:
Match the List-I with the List-II and select the correct answer using the codes given belowList IList IIA. Optimum Moisture Content1. Compaction of cohesive soilB. Vibratory Rollers2. Compaction of Granular soilC. Zero air Void Line3. Maximum Dry Density 4. Relative Density 5. 100 % Saturation
Pneumatic tyred rollers are used for compaction for _______ soil of low plasticity.
OMC-SP and MDD-SP denote the optimum moisture content and maximum dry density obtained from standard Proctor compaction test, respectively. OMC-MP and MDD-MP denote the optimum moisture content and maximum dry density obtained from the modified Proctor compaction test, respectively. Which one of the following is correct?
Compaction of granular soils are generally done by:
If the permeability, shrinkage and swelling of a compacted soil having same density on dry side of optimum moisture content is compared with compaction on wet side of optimum, the variation in these properties will be
Amount of compaction greatly affects:
In a proctor test, 1.8 kg of moist soil was filled in the mould (volume = 944 cc) after compaction. A soil sample weighting 23 g was taken from the mould and oven dried for 24 hours at a temperature of 110°C. The weight of the dry sample was found to be 20 g. The specific gravity of soil solids is G = 2.7. The theoretical maximum value of the dry unit weight of the soil at that water content is equal to _____
Proctor’s compaction test for the maximum dry density of a certain soil gave the results as: 1.77 gm/cc and OMC 14.44%. The specific gravity of the clay soil grain was 2.66. What was the saturation degree for this soil?

For conducting a Standard Proctor Compaction Test, the weight of hammer (P in kg), the fall of hammer (Q in mm), the number of blows per layer (R) and the number of layers (S) required are respectively.

Discussion

No Comment Found

Related MCQs

Reply to Comment