For a metal which is prone to hot shortness like aluminium and copper – McqOptions

MCQOPTIONS

1.	For a metal which is prone to hot shortness like aluminium and copper, the extrusion speed has to be _______
A.	high
B.	low
C.	moderate
D.	doesn’t matter
Answer» C. moderate

Discussion

No Comment Found

Related MCQs

In which of the following process, the friction between the billet and the die wall is minimum?
The Ugine-Sejournet process is associated with which of the following metal working process?
The following schematic diagram shows the metal inside the extrusion chamber. Identify the dead zone.
Find the extrusion pressure for the metal having extrusion constant 5*109. The initial and final cross-sectional area is 50 mm2 and 10 mm2?
If R is the reduction ratio and r is a fractional reduction in area, then the relationship between R & r will be given as __________
The extrusion ratio for hot extrusion is much more than the extrusion ratio for cold extrusion.
The plot between the extrusion pressure vs. the ram travel is plotted. Find the correct combination of direct and indirect extrusion process relationship?
Decreasing the die angle __________ the homogeneity of deformation and __________ the extrusion pressure.
For a metal which is prone to hot shortness like aluminium and copper, the extrusion speed has to be _______