For a four-bar linkage in toggle position, the value of mechanical adv

1.	For a four-bar linkage in toggle position, the value of mechanical advantage is
A.	0.0
B.	0.5
C.	1.0
D.	‚Äö√Ñ√∂‚àö‚Ä†‚àö¬™
Answer» E.

Discussion

No Comment Found

Related MCQs

Following are the specifications of a single purchase crab:Diameter of load drum, d = 200 mmLength of lever, l = 1.2 mNo. of teeth on pinion, T1 = 10No. of teeth on spur wheel, T2 = 100On this machine efforts of 100 N and 160 N are required to lift the loads of 3000 N and 9000 N respectively. Find the efficiency at 9000N.
Following are the specifications of a single purchase crab:Diameter of load drum, d = 200 mmLength of lever, l = 1.2 mNo. of teeth on pinion, T1 = 10No. of teeth on spur wheel, T2 = 100On this machine efforts of 100 N and 160 N are required to lift the loads of 3000 N and 9000 N respectively. Find the efficiency at 3000N.
On a machine efforts of 100 N and 160 N are required to lift the loads of 3000 N and 9000 N respectively. Find the law of the machine.
Following are the specifications of a single purchase crab:Diameter of load drum, d = 200 mmLength of lever, l = 1.2 mNo. of teeth on pinion, T1 = 10No. of teeth on spur wheel, T2 = 100Find the velocity ratio of this machine.
The lengths of the links of a 4- bar linkage with revolute pairs only are p,q,r and s units. Given that p < q < r < s and s+p < q+r which of these links should be the fixed one, for obtaining a ‘double crank’ mechanism?
ON_A_MACHINE_EFFORTS_OF_100_N_AND_160_N_ARE_REQUIRED_TO_LIFT_THE_LOADS_OF_3000_N_AND_9000_N_RESPECTIVELY._FIND_THE_LAW_OF_THE_MACHINE.?$
A weston differential pulley block consists of a lower block and upper block. The upper block has two cogged grooves, one of which has a radius of 150 mm and the other a radius of 125 mm. If the efficiency of the machine is 50% calculate the effort required to raise a load of 1.5 kN.
The number of links in a planer mechanism with revolute joints having 10 instantaneous centres is
It is planned to construct a four-bar mechanism ABCD with length AB= 60mm, BC = 100mm, CD = 70 mm and fixed link AD = 200 mm. If at least one link is required to have a complete rotation, this mechanism is
For the same crank length and uniform angular velocity of the crank in an offset slider crank mechanism, if the connecting rod length is increased by 1.5 times, the velocity of piston will

For a four-bar linkage in toggle position, the value of mechanical advantage is

Discussion

No Comment Found

Related MCQs

Reply to Comment