Determine the correctness or otherwise of the following Assertion (A) and the Reason (R) : Assertion (A) : Curvature correction must be applied when the sights are long Reason (R) : Line of collimation is not a level line but is tangential to the level line.

Both (A) and (R) are true but (R) is not the correct reason for (a)

Both (A) and (R) are true and (R) is the correct reason for (A)

Both (A) and (R) are true but (R) is not the correct reason for (a)

Determine the correctness or otherwise of the following Assertion (A)

1.	Determine the correctness or otherwise of the following Assertion (A) and the Reason (R) : Assertion (A) : Curvature correction must be applied when the sights are long Reason (R) : Line of collimation is not a level line but is tangential to the level line.
A.	Both (A) and (R) are true and (R) is the correct reason for (A)
B.	Both (A) and (R) are true but (R) is not the correct reason for (a)
C.	Both (A) and (R) are false
D.	(A) is false but (R) is true
Answer» B. Both (A) and (R) are true but (R) is not the correct reason for (a)

Discussion

No Comment Found

Related MCQs

Following bearings are observed while traversing with a compass. Line Fore Bearing Back Bearing AB 126 45' 308 00' BC 49 15' 227 30' CD 340 30' 161 45' DE 258 30' 78 30' EA 212 30' 31 45' After applying the correction due to local attraction, the corrected fore bearing of line BC will be
The bearings of two inaccessible stations, S1 (Easting 500 m, Northing 500 m) and S2 (Easting 600 m, Northing 450 m) from a station S3 were observed as 225 and 153 26' respectively. The independent Easting (in m) of station S3 is :
A road is provided with a horizontal circular curve having deflection angle of 55 and centre line radius of 250 m. A transition curve is to be provided at each end of the circular curve of such a length that the rate of gain of radial acceleration is 0.3 m/s3 at a speed of 50 km per hour. Length of the transition curve required at each of the ends is
Group I lists tool/instrument while Group II lists the method of surveying. Match the tool/instrument with the corresponding method of surveying. Group I Group II P. Alidade 1. Chain surveying Q. Arrow 2. Lavelling R. Bubble tube 3. Plain table surveying S. Stadia hair 4. Theodolite surveying
Which of the following errors can be eliminated by reciprocal measurements in differential levelling ? I Error due to earth s curvature II Error due to atmospheric refraction
Determine the correctness or otherwise of the following Assertion (A) and the Reason (R) : Assertion (A) : Curvature correction must be applied when the sights are long Reason (R) : Line of collimation is not a level line but is tangential to the level line.
The plan of a survey plotted to a scale of 10 m to 1 cm is reduced in such a way that a line originally 10 cm long now measures 9 cm. The area of the reduced plan is measured as 81 cm2. The actual (m2) of the survey is
Two Pegs A and B were fixed on opposite banks of a 50 m wide river. The level was set up at A and the staff readings on Pegs A and B were observed as 1.350 m and 1.550 m, respectively. Thereafter the instrument was shifted and set up at B. The staff readings on Pegs B and A were observed as 0.750 m and 0.550 m, respectively. If the R.L. of Peg A is 100.200 m, the R.L. (in m) of Peg B is ______ .
In a leveling work, sum of the Back Sight (B.S.) and Fore Sight (F.S.) have been found to be 3.085 m and 5.645 m respectively. If the Reduced Level (R.L.) of the starting station is 100.000 m, the R.L. (in m) of the last station is ______ .
A theodolite is set up at station A and a 3 m long staff is held vertically at station B. The depression angle reading at 2.5 m marking on the staff is 6 10'. The horizontal distance between A and B is 2200 m. Height of instrument at station A is 1.1 m and R.L. of A is 880.88 m. Apply the curvature and refraction correction, and determine the R.L. of B (in m).

Determine the correctness or otherwise of the following Assertion (A) and the Reason (R) : Assertion (A) : Curvature correction must be applied when the sights are long Reason (R) : Line of collimation is not a level line but is tangential to the level line.

Discussion

No Comment Found

Related MCQs

Reply to Comment