Conventional cleaved mirror structures are difficult to fabricate with – McqOptions

MCQOPTIONS

1.	Conventional cleaved mirror structures are difficult to fabricate with the cavity lengths below
A.	200‚âà√≠¬¨‚à´mand greater than 150 ‚âà√≠¬¨‚à´m
B.	100 ‚âà√≠¬¨‚à´m and greater than 50 ‚âà√≠¬¨‚à´m
C.	50 ‚âà√≠¬¨‚à´m
D.	150 ‚âà√≠¬¨‚à´m
Answer» D. 150 ‚âà√≠¬¨‚à´m

Discussion

No Comment Found

Related MCQs

_________________ is a technique used to render the non-conducting material around the active cavity by producing permanent defects in the implanted area.
The narrow line-width obtained under the CW operation for quarter wavelength shifted DFB laser is ________________
The InGaAsP/InP double channel planar DFB-BH laser with a quarter wavelength shifted first order grating provides a single frequency operation and incorporates a phase shift of ______________
Fabry-Perot devices with BH geometries high modulation speeds than DFB-BH lasers.
DBF-BH lasers exhibit low threshold currents in the range of ________________
The semiconductor lasers employing the distributed feedback mechanism are classified in _________________ categories.
The first order grating (l=1) provide the strongest coupling within the device.
In the given equation, corrugation period is given by lλb/2Ne. If λb is the Bragg wavelength, then what does ‘l’ stand for?
Conventional cleaved mirror structures are difficult to fabricate with the cavity lengths below __________
DBF-BH_LASERS_EXHIBIT_LOW_THRESHOLD_CURRENTS_IN_THE_RANGE_OF_________________?$