Calculate the thickness of the strap required in longitudinal butt joi – McqOptions

MCQOPTIONS

1.	Calculate the thickness of the strap required in longitudinal butt joint if pitch of the rivets is 150mm and diameter of rivets 30mm. Also thickness of plate is 20mm.
A.	None of the listed
B.	16.7mm
C.	13.4mm
D.	10.2mm
Answer» C. 13.4mm

Discussion

No Comment Found

Related MCQs

Number of rivets in the circumferential joint can be found by which formula? Symbols have their usual meanings.
Longitudinal and circumferential both types of joints try to make a ring from the steel plate.
Calculate the thickness of the strap required in longitudinal butt joint if pitch of the rivets is 150mm and diameter of rivets 30mm. Also thickness of plate is 20mm.
If number of rivets subjected to single shear per pitch length is 2 and those subjected to double shear per pitch length are 3, then find the shear resistance of rivets is diameter of rivets is 20mm and permissible shear 60N/mm .
A cylindrical pressure vessel with a 2m wide inside diameter is subjected to internal steam pressure of 1.5Mpa. Calculate the thickness of the plate required if corrosion allowance is considered as 2mm. The permissible value of tensile stress is 80N/mm .
The rivets in outer row of longitudinal boiler shell butt joint are subjected to double shear.
Unwin s formula is used to find _____ of rivets.
Corrosion allowance is the metal removed to reduce the thickness required to withstand internal pressure.