Calculate the spacing of 5mm wires having a loss ratio of 0.075, compr – McqOptions

MCQOPTIONS

1.	Calculate the spacing of 5mm wires having a loss ratio of 0.075, compressive stress is 10.75n/mm², 5mm diameter wires stress is 1000n/mm², 12 wires of 8mm diameter are stressed to 1200n/mm²(N_d = 840n/mm²)?
A.	15.4mm
B.	11.6mm
C.	12.4mm
D.	18.5mm
Answer» C. 12.4mm

Discussion

No Comment Found

Related MCQs

Calculate circumferential prestress if loss ratio 0.75, thickness is 120mm, working pressure is 1n/mm2 and Nd is given as 840n/mm?
The most common method of wire wrapping for circular tanks consists of __________
In the fixed base joint the junction is between the tank wall and __________
In the case of large tanks, the base slabs is subdivided by __________
The metal linear concept in prestressed tanks has proved to be success in case of __________
Prestressed concrete although it is water tight, it is not __________
Prestressed concrete tanks have been widely used for the storage of __________
CALCULATE_MINIMUM_WALL_THICKNESS_GIVEN_A_CYLINDRICAL_PRESTRESSED_WATER_TANK_OF_INTERNAL_DIAMETER_30M_OVER_A_DEPTH_OF_7.5M_AND_THE_PERMISSIBLE_COMPRESSIVE_STRESS_AT_TRANSFER_IS_13N/MM<SUP>2</SUP>_AND_THE_MAXIMUM_COMPRESSIVE_STRESS_UNDER_WORKING_PRESSURE_IS_1N/MM<SUP>2</SUP>_AND_THE_LOSS_RATIO_IS_0.75??$
Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm<sup>2</sup> are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm<sup>2</sup> are to be used for vertical prestressing?$
Calculate_circumferential_prestress_of_a_cylindrical_prestressed_concrete_water_tank_given_that_the_thickness_is_12mm,_loss_ratio_is_0.75,_the_maximum_stress_under_working_pressure_is_1n/mm<sup>2</sup>(N<sub>d</sub>_value_is_720)?$