Calculate the pulse width in case of MPM, if the amplitudes of square – McqOptions

MCQOPTIONS

1.	Calculate the pulse width in case of MPM, if the amplitudes of square wave and triangular wave are respectively 2 V and 3 V respectively. 16 pulses per cycle are generated.
A.	18°
B.	7.5°
C.	6.4°
D.	9°
Answer» C. 6.4°

Discussion

No Comment Found

Related MCQs

In a PWM inverter, if the frequency of the lowest harmonic is 180 Hz, then the frequency of the fundamental component would be ___________
Calculate the pulse width in case of MPM, if the amplitudes of square wave and triangular wave are respectively 2 V and 3 V respectively. 16 pulses per cycle are generated.
In an inverter, if the fundamental output frequency is 50 Hz, then the frequency of the lowest order harmonic will be
In MPM the amplitudes of square wave and triangular wave are respectively 1 V and 2 V. For generating 5 pulses per half cycle, the pulse width should be ___________
In single-phase modulation of PWM inverters, the pulse width is 120°. For an input voltage of 220 V dc, the rms value of output voltage is
Increasing the number of pulses (N), ____________
In case of sinusoidal pulse width modulation with MI < 1, if the number of pulses per half cycle (N) = 6, then
In case of sinusoidal pulse width modulation with MI < 1, the order of the dominate harmonic can be raised by
In case of sinusoidal pulse width modulation with MI < 1, if the number of pulses per half cycle (N) = 5, then
In pulse width modulated inverters, the output voltage is controlled by controlling the