An external gear with 60 teeth meshes with a pinion of 20 teeth, modul – McqOptions

MCQOPTIONS

1.	An external gear with 60 teeth meshes with a pinion of 20 teeth, module being 6 mm. What is the centre distance in mm?
A.	120
B.	180
C.	240
D.	300
Answer» D. 300

Discussion

No Comment Found

Related MCQs

A spur gear transmits 10 kW at a pitch line velocity of 10 m/s; driving gear has a diameter of 1.0 m. Find the tangential force between the driver and the follower, and the transmitted torque respectively.
Consider the following characteristics:1. Small interference2. Strong tooth.3. Low production cost4. Gear with small number of teeth. Those characteristics which are applicable to stub 20° involute system would include
Consider the following statements regarding the choice of conjugate teeth for the profile of mating gears:1. They will transmit the desired motion2. They are difficult to manufacture.3. Standardisation is not possible4. The cost of production is low. Which of these statements are correct?
Consider the following statements:1. A stub tooth has a working depth larger than that of a full-depth tooth.2. The path of contact for involute gears is an arc of a circle. Which of the statements given above is/are correct?
A_spur_gear_transmits_10_kW_at_a_pitch_line_velocity_of_10_m/s;_driving_gear_has_a_diameter_of_1.0_m._Find_the_tangential_force_between_the_driver_and_the_follower,_and_the_transmitted_torque_respectively.$
In gears, interference takes place whe?
Common contact ratio of a pair of spur pinion and gear is
In involute gears the pressure angle is
Which one of the following is true for involute gears?
An external gear with 60 teeth meshes with a pinion of 20 teeth, module being 6 mm. What is the centre distance in mm?