A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance on the LV side is___________

A three phase transformer has a name plate details of 30 MVA and volt

1.	A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance on the LV side is___________
A.	176.33 Ω
B.	1763.3 Ω
C.	47.6 Ω
D.	15.87 Ω
Answer» B. 1763.3 Ω

Discussion

No Comment Found

Related MCQs

The phasor operator which is used to depict the unbalanced phase voltages into three phase quantities, provides a rotation of
A given system to be analysed was found with the below phasor representation of the system voltages. Which of the symmetrical components will be present in the mentioned system?
A 400 V, 50 Hz three phase balanced source ripples to a star connected load whose rating is S(=300+j400) kVA. A delta connected capacitor bank needed to bring p.f. to 0.9 lagging. The operating power factor of the system is
A 400 V, 50 Hz three phase balanced source ripples to a star connected load whose rating is S(=300+j400) kVA. The rating of the delta connected capacitor bank needed to bring p.f. to 0.9 lagging is _______ KVAR.
Two alternators A and B having 5% speed regulation are working in parallel at a station. Alternator A is rated at 15 MW while B is at 20 MW. When the total load to be shared is 12 MW, then how much of the load will be shared by the alternator B?
A 200 bus power system has 160 PQ bus. For achieving a load flow solution by N-R in polar coordinates, the minimum number of simultaneous equation to be solved is ___________
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is __________
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance on the LV side is___________
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, turns ratio of the windings is ______

A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance on the LV side is___________

Discussion

No Comment Found

Related MCQs

Reply to Comment