A short hollow cast iron column has a cross section of 300 cm2 and the – McqOptions

MCQOPTIONS

1.	A short hollow cast iron column has a cross section of 300 cm2 and the section modulus Z = 10 × 105 mm3 has(i) Axial load of 250 kN(ii) A load of 50 kN on a bracket attached to column whose load line is at 200 mm from the axis of the columnThe maximum and minimum stress intensities respectively are
A.	10 MPa and 10 MPa
B.	20 MPa and 0 MPa
C.	0 MPa and 10 MPa
D.	None of the above
Answer» C. 0 MPa and 10 MPa

Discussion

No Comment Found

Related MCQs

The bending stress is ____________
What is the expression of the bending equation?
Stress in a beam due to simple bending is ____________
A beam is said to be of uniform strength, if ____________
A beam has a solid circular cross-section having diameter d. If a section of the beam is subjected to a shear force F, the maximum shear stress in the cross-section is given by
A shaft is subjected to bending moment, M and a torque, T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in a shaft is
A steel plate is bent into a circular arc of radius 10 m. If the plate section be 120 mm wide and 20 mm thick, with E = 2 × 105 N/mm2, then the maximum bending stress-induced is
At a point in the web of a girder the bending stress (σx) is 3 MPa (tensile) and the shearing stress (τ) at the same point is 2 MPa, then the maximum shear stress is
A steel beam is replaced by a corresponding aluminum beam of the same cross-sectional shape and dimension and is subjected to the same loading. The maximum bending stress now will be
A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of bending stress occur?