A right-angled triangle with base 50 mm and height 75 mm is placed wit – McqOptions

MCQOPTIONS

1.	A right-angled triangle with base 50 mm and height 75 mm is placed with its base horizontal, subjected to shear force of F. If moment of inertia is ‘I’ about the axis passing through centroid parallel to the base, then the shear stress at the axis passing through the centroid is
A.	416·67 F/I
B.	449·67 F/I
C.	316·67 F/I
D.	492·2 F/I
Answer» B. 449·67 F/I

Discussion

No Comment Found

Related MCQs

The bending stress is ____________
What is the expression of the bending equation?
Stress in a beam due to simple bending is ____________
A beam is said to be of uniform strength, if ____________
A beam has a solid circular cross-section having diameter d. If a section of the beam is subjected to a shear force F, the maximum shear stress in the cross-section is given by
A shaft is subjected to bending moment, M and a torque, T simultaneously. The ratio of the maximum bending stress to maximum shear stress developed in a shaft is
A steel plate is bent into a circular arc of radius 10 m. If the plate section be 120 mm wide and 20 mm thick, with E = 2 × 105 N/mm2, then the maximum bending stress-induced is
At a point in the web of a girder the bending stress (σx) is 3 MPa (tensile) and the shearing stress (τ) at the same point is 2 MPa, then the maximum shear stress is
A steel beam is replaced by a corresponding aluminum beam of the same cross-sectional shape and dimension and is subjected to the same loading. The maximum bending stress now will be
A cantilever beam of T cross-section carries uniformly distributed load. Where does the maximum magnitude of bending stress occur?