A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/SECOND._THE_SAMPLED_INPUT_X(N)_IS_AVERAGED_USING_THE_DIFFERENCE_EQUATION:?$

=[x (n)+x (n-1)+x(n-2)+x(n-4)/4] For a step input, the maximum time taken for the output to reach the final value after the input transition is

A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/

1.	A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/SECOND._THE_SAMPLED_INPUT_X(N)_IS_AVERAGED_USING_THE_DIFFERENCE_EQUATION:?$
A.	=[x (n)+x (n-1)+x(n-2)+x(n-4)/4] For a step input, the maximum time taken for the output to reach the final value after the input transition is
B.	20 ms
C.	40 ms
D.	80 ms
Answer» C. 40 ms

Discussion

No Comment Found

Related MCQs

The sinusoid x(t) =6cos10πt is sampled at the rate of 15 Hz and applied to ideal rectangular LPF with cut-off frequency of 10 Hz, then the output of filter contains:
A digital measuring instrument employs a sampling rate of 100 samples/second. The sampled input x(n) is averaged using the difference equation:Y (n) =[x (n)+x (n-1)+x(n-2)+x(n-4)/4]For a step input, the maximum time taken for the output to reach the final value after the input transition is
An LTI system having transfer function s2+1/s2+2s+1 and input x(t) =sin(t+1) is in steady state. The output is sampled at ws rad/s to obtain the final output {y (k)}. Which of the following is true?
A signal represented by x(t) =5cos 400πt is sampled at a rate 300 samples/sec. The resulting samples are passed through an ideal low pass filter of cut-off frequency 150 Hz. Which of the following will be contained in the output of the LPF?
Statement (I): Aliasing occurs when the sampling frequency is less than twice the maximum frequency in the signal.Statement (II): Aliasing is a reversible process.
A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/SECOND._THE_SAMPLED_INPUT_X(N)_IS_AVERAGED_USING_THE_DIFFERENCE_EQUATION:?$
The_sinusoid_x(t)_=6cos10‚âà√¨‚àö√ët_is_sampled_at_the_rate_of_15_Hz_and_applied_to_ideal_rectangular_LPF_with_cut-off_frequency_of_10_Hz,_then_the_output_of_filter_contains:$#
An LTI system having transfer function s2+1/s2+2s+1 and input x(t) =sin(t+1) is in steady state. The output is sampled at ws rad/s to obtain the final output {y (k)}. Which of the following is true?
A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t). The resulting signal is passed through an ideal low pass filter with bandwidth 1 kHz. The output of the low pass filter would be :
A signal represented by x(t) =5cos 400‚âà√¨‚àö√ët is sampled at a rate 300 samples/sec. The resulting samples are passed through an ideal low pass filter of cut-off frequency 150 Hz. Which of the following will be contained in the output of the LPF?$

A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/SECOND._THE_SAMPLED_INPUT_X(N)_IS_AVERAGED_USING_THE_DIFFERENCE_EQUATION:?$

Discussion

No Comment Found

Related MCQs

Reply to Comment