A digital measuring instrument employs a sampling rate of 100 samples/second. The sampled input x(n) is averaged using the difference equation:Y (n) =[x (n)+x (n-1)+x(n-2)+x(n-4)/4]For a step input, the maximum time taken for the output to reach the final value after the input transition is

A digital measuring instrument employs a sampling rate of 100 samples

1.	A digital measuring instrument employs a sampling rate of 100 samples/second. The sampled input x(n) is averaged using the difference equation:Y (n) =[x (n)+x (n-1)+x(n-2)+x(n-4)/4]For a step input, the maximum time taken for the output to reach the final value after the input transition is
A.	20 ms
B.	40 ms
C.	80 ms
D.	∞
Answer» C. 80 ms

Discussion

No Comment Found

Related MCQs

The sinusoid x(t) =6cos10πt is sampled at the rate of 15 Hz and applied to ideal rectangular LPF with cut-off frequency of 10 Hz, then the output of filter contains:
A digital measuring instrument employs a sampling rate of 100 samples/second. The sampled input x(n) is averaged using the difference equation:Y (n) =[x (n)+x (n-1)+x(n-2)+x(n-4)/4]For a step input, the maximum time taken for the output to reach the final value after the input transition is
An LTI system having transfer function s2+1/s2+2s+1 and input x(t) =sin(t+1) is in steady state. The output is sampled at ws rad/s to obtain the final output {y (k)}. Which of the following is true?
A signal represented by x(t) =5cos 400πt is sampled at a rate 300 samples/sec. The resulting samples are passed through an ideal low pass filter of cut-off frequency 150 Hz. Which of the following will be contained in the output of the LPF?
Statement (I): Aliasing occurs when the sampling frequency is less than twice the maximum frequency in the signal.Statement (II): Aliasing is a reversible process.
A_DIGITAL_MEASURING_INSTRUMENT_EMPLOYS_A_SAMPLING_RATE_OF_100_SAMPLES/SECOND._THE_SAMPLED_INPUT_X(N)_IS_AVERAGED_USING_THE_DIFFERENCE_EQUATION:?$
The_sinusoid_x(t)_=6cos10‚âà√¨‚àö√ët_is_sampled_at_the_rate_of_15_Hz_and_applied_to_ideal_rectangular_LPF_with_cut-off_frequency_of_10_Hz,_then_the_output_of_filter_contains:$#
An LTI system having transfer function s<sup>2</sup>+1/s<sup>2</sup>+2s+1 and input x(t) =sin(t+1) is in steady state. The output is sampled at ws rad/s to obtain the final output {y (k)}. Which of the following is true?
A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t). The resulting signal is passed through an ideal low pass filter with bandwidth 1 kHz. The output of the low pass filter would be :
A signal represented by x(t) =5cos 400‚âà√¨‚àö√ët is sampled at a rate 300 samples/sec. The resulting samples are passed through an ideal low pass filter of cut-off frequency 150 Hz. Which of the following will be contained in the output of the LPF?$

A digital measuring instrument employs a sampling rate of 100 samples/second. The sampled input x(n) is averaged using the difference equation:Y (n) =[x (n)+x (n-1)+x(n-2)+x(n-4)/4]For a step input, the maximum time taken for the output to reach the final value after the input transition is

Discussion

No Comment Found

Related MCQs

Reply to Comment