MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 21 Mcqs, each offering curated multiple-choice questions to sharpen your Networking knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Cisco's Unified Wireless Solution provides a mesh solution. What devices do you absolutely need to purchase to run a Cisco solution?1. WCS2. Controller3. Access point4. Bridge |
| A. | and 2 |
| B. | and 3 |
| C. | and 4 only |
| D. | only |
| Answer» C. and 4 only | |
| 2. |
What is the maximum data rate for the 802.11b standard? |
| A. | 6Mbps |
| B. | 11Mbps |
| C. | 22Mbps |
| D. | 54Mbps |
| Answer» C. 22Mbps | |
| 3. |
What is the maximum distance running the lowest data rate for 802.11g? |
| A. | About 100 feet |
| B. | About 175 feet |
| C. | About 300 feet |
| D. | About 350 feet |
| Answer» D. About 350 feet | |
| 4. |
How many non-overlapping channels are available with 802.11g? |
| A. | 3 |
| B. | 12 |
| C. | 23 |
| D. | 40 |
| Answer» B. 12 | |
| 5. |
What is the maximum distance running the lowest data rate for 802.11a? |
| A. | About 100 feet |
| B. | About 175 feet |
| C. | About 300 feet |
| D. | About 350 feet |
| Answer» C. About 300 feet | |
| 6. |
How many non-overlapping channels are available with 802.11h? |
| A. | 3 |
| B. | 12 |
| C. | 23 |
| D. | 40 |
| Answer» D. 40 | |
| 7. |
What is the maximum data rate for the 802.11a standard? |
| A. | 6Mbps |
| B. | 11Mbps |
| C. | 22Mbps |
| D. | 54Mbps |
| Answer» E. | |
| 8. |
What is the maximum distance with maximum data rate for 802.11g? |
| A. | About 65-75 feet |
| B. | About 90-100 feet |
| C. | About 150 feet |
| D. | Over 200 feet |
| Answer» C. About 150 feet | |
| 9. |
What is the frequency range of the IEEE 802.11g standard? |
| A. | 2.4Gbps |
| B. | 5Gbps |
| C. | 2.4GHz |
| D. | 5GHz |
| Answer» D. 5GHz | |
| 10. |
How many non-overlapping channels are available with 802.11a? |
| A. | 3 |
| B. | 12 |
| C. | 23 |
| D. | 40 |
| Answer» C. 23 | |
| 11. |
In Cisco's Unified Wireless Solution, what is the split-MAC architecture? |
| A. | The split-MAC architecture uses MAC addresses to create a forward/filter table and break up collision domains. |
| B. | The split-MAC architecture allows the splitting of 802.11 protocol packets between the AP and the controller to allow processing by both devices. |
| C. | The split-MAC architecture uses MAC addresses on the wireless network and IP addresses on the wired network. |
| D. | The split-MAC architecture uses MAC addresses to create a forward/filter table and break up broadcast domains. |
| Answer» C. The split-MAC architecture uses MAC addresses on the wireless network and IP addresses on the wired network. | |
| 12. |
Cisco's Unified Wireless Solution provides a mesh solution. What devices do you absolutely need to purchase to run a Cisco solution? WCS Controller Access point Bridge |
| A. | 1 and 2 |
| B. | 2 and 3 |
| C. | 1 and 4 only |
| D. | 4 only |
| Answer» C. 1 and 4 only | |
| 13. |
How many non-overlapping channels are available with 802.11b? |
| A. | 3 |
| B. | 12 |
| C. | 23 |
| D. | 40 |
| Answer» B. 12 | |
| 14. |
What is the maximum data rate for the 802.11g standard? |
| A. | 6Mbps |
| B. | 11Mbps |
| C. | 22Mbps |
| D. | 54Mbps |
| Answer» E. | |
| 15. |
You have a Cisco mesh network. What protocol allows multiple APs to connect with many redundant connections between nodes? |
| A. | LWAPP |
| B. | AWPP |
| C. | STP |
| D. | IEEE |
| Answer» C. STP | |
| 16. |
What is the frequency range of the IEEE 802.11b standard? |
| A. | 2.4Gbps |
| B. | 5Gbps |
| C. | 2.4GHz |
| D. | 5GHz |
| Answer» D. 5GHz | |
| 17. |
You are connecting your access point and it is set to root. What does Extended Service Set ID mean? |
| A. | That you have more than one access point and they are in the same SSID connected by a distribution system. |
| B. | That you have more than one access point and they are in separate SSIDs connected by a distribution system. |
| C. | That you have multiple access points, but they are placed physically in different buildings. |
| D. | That you have multiple access points, but one is a repeater access point. |
| Answer» B. That you have more than one access point and they are in separate SSIDs connected by a distribution system. | |
| 18. |
What is the maximum distance running the lowest data rate for 802.11b? |
| A. | About 100 feet |
| B. | About 175 feet |
| C. | About 300 feet |
| D. | About 350 feet |
| Answer» E. | |
| 19. |
What is the maximum distance with maximum data rate for 802.11a? |
| A. | About 65-75 feet |
| B. | About 90-100 feet |
| C. | About 150 feet |
| D. | Over 200 feet |
| Answer» B. About 90-100 feet | |
| 20. |
What is the maximum distance with maximum data rate for 802.11b? |
| A. | About 65-75 feet |
| B. | About 90-100 feet |
| C. | About 150 feet |
| D. | Over 200 feet |
| Answer» D. Over 200 feet | |
| 21. |
What is the frequency range of the IEEE 802.11a standard? |
| A. | 2.4Gbps |
| B. | 5Gbps |
| C. | 2.4GHz |
| D. | 5GHz |
| Answer» E. | |