Explore topic-wise MCQs in Electronics and Telecommunication Engineering [ENT.

This section includes 389 Mcqs, each offering curated multiple-choice questions to sharpen your Electronics and Telecommunication Engineering [ENT knowledge and support exam preparation. Choose a topic below to get started.

351.

Once a signal source is inside the sensing range of a sensor, further increasing the sensor density ___________the average distance from a sensor to the signal source, hence improving the SNR

A. decreases
B. increases
C. maintain
D. does not affect
Answer» B. increases
352.

Using more nodes increases

A. the cost
B. the power consumption of components
C. neither a nor b
D. a and b both
Answer» E.
353.

Because of the unique attenuation characteristics of RF signals, _____network provides a significant energy saving over ______network for the same distance

A. single hop/multi hop
B. multi hop / single hop
C. wireless/ wired
D. single hop/ wired
Answer» C. wireless/ wired
354.

The greatest advantage of networked sensing are in improved___________

A. robustness
B. scalability
C. both
D. not applicable
Answer» D. not applicable
355.

It is more appropriate to address nodes in a sensor network by_____ than by______

A. ip address/physical properties
B. netwok address / ip address
C. ip address / netwok address
D. physical properties/ ip address
Answer» E.
356.

A sensor network is designed to collect information from a___________ environment

A. logical
B. physical
C. logical as well as physical
D. none of above
Answer» C. logical as well as physical
357.

Communicating 1 bit over the wireless medium at short ranges consumes ___________energy than processing that bit.

A. less
B. more
C. equal
D. can not compare
Answer» C. equal
358.

___________routes user queries or commands to appropriate nodes in a sensor network

A. bridge and gateway both
B. bridge only
C. gateway only
D. none of above
Answer» D. none of above
359.

Each node is equipped with

A. only one sensing device
B. one or more sensing devices
C. only more than one sensing devices
D. no sensing device attached
Answer» C. only more than one sensing devices
360.

This mode of wireless network allows devices to communicate directly with each other.

A. digital
B. physical
C. ad-hoc
D. infrastructure
Answer» D. infrastructure
361.

Ad-hoc mode of wireless network is also known as __________ mode.

A. router
B. roaming
C. infrastructure
D. digital
Answer» C. infrastructure
362.

What is the acronym used to indicate a network that provides support for a single user in a 10-meter range?

A. man
B. can
C. lan
D. pan
Answer» E.
363.

Which one of the following frequency bands is used for cordless phones?

A. 40 mhz
B. 900 mhz
C. 75 mhz
D. 300 mhz
Answer» C. 75 mhz
364.

What wireless mode is being used by a student who uses a wireless connection to link to her lab partner's notebook PC in a study hall?

A. ad-hoc
B. infrastructure
C. fixed-base
D. roaming
Answer» B. infrastructure
365.

sensor network is subject to a unique set of resource constraints such as

A. finite on-board battery power
B. limited network communication bandwidth
C. a and b both
D. non of the above
Answer» D. non of the above
366.

In a typical sensor network, each sensor node operates unethered and has a microprocessor and a small amount of memory for signal processing and task scheduling

A. true
B. false
C. partially correct as memory is large
D. partially correct as sensor node does not have microprocessor
Answer» B. false
367.

Information collected by and transmitted on a sensor network describes conditions of physical environments and requires advanced query interfaces and search engines to effectively support user-level functions

A. partially correct as node support users level functions
B. partially correct as node does not have sensors
C. completetly coeerct
D. incorreect
Answer» D. incorreect
368.

The challenges we face in designing sensor network systems and applications include

A. limited hardware
B. limited support for networking
C. limited support for software development
D. all of the above
Answer» E.
369.

A___________ sensing system is inherently more robust against individual sensor node or link failures, because of redundancy in the network

A. centralized
B. decentralized
C. ad-hoc
D. multi hope
Answer» C. ad-hoc
370.

A+B16:G26 sensor network is designed to perform a set of high level information processing tasks such as

A. detection
B. tracking
C. classification
D. all of above
Answer» E.
371.

Following are application areas of wireless sensor network

A. asset and warehouse management
B. automotive
C. building monitoring and control
D. all of above
Answer» E.
372.

Following are application areas of wireless sensor networks

A. health care
B. industrial process control
C. military battlefield awareness
D. all of above
Answer» E.
373.

The size of wireless sensor system is limited mostly by

A. the cost of maintaining communication links
B. the cost of sensor hardware
C. environmental monitoring
D. a and b
Answer» E.
374.

Sensors can be used

A. to monitor conditions and movements of wild animals or plants in wildlife habitats
B. to monitor air quality and track environmental pollutants, wildfires or other natural or man-made disasters
C. to monitor biological or chemical hazards to provide early warnings
D. all of above
Answer» E.
375.

They can even use other services such as location tracking using the __.

A. gps
B. vps
C. gprs
D. gsm
Answer» B. vps
376.

___________framework allows an application developer to write code for a sensor network signal processing and tracking application using a state-centric model of programming

A. tossim
B. pieces
C. contiki
D. mantis
Answer» C. contiki
377.

Which of the following is a collection of many separate networks?

A. lan
B. man
C. wan
D. pan
Answer» D. pan
378.

The portion of the electromagnetic spectrum occupied by a signal is called ________

A. signal spectrum
B. bandwidth
C. frequency width
D. signal strength
Answer» B. bandwidth
379.

Wireless networks are computer networks that use radio frequency channels as their __ for communication.

A. physical medium
B. medium access control
C. tdma
D. cdma
Answer» B. medium access control
380.

What is the term used to describe the ability for networking devices from different manufacturers to communicate effectively?

A. accessible
B. interoperable
C. portable
D. scalable
Answer» C. portable
381.

What is the term used to describe the ability of a network technology to be easily resized to meet the growing or changing requirements of an organization?

A. scalability
B. portability
C. interoperability
D. accessibility
Answer» B. portability
382.

What WLAN device provides communications management services to wireless workstations?

A. access point
B. antenna
C. network adaptor
D. repeater
Answer» B. antenna
383.

Which one of the following is not a consideration when deciding between a WLAN and a wired LAN beyond the network medium?

A. scalability
B. ease of installation
C. flexibility
D. rf interferences
Answer» E.
384.

A wireless extension to a wired network can eliminate the need for new __________ to be installed.

A. cables
B. access point
C. router
D. bridges
Answer» B. access point
385.

A wireless network provides immediate connection anywhere in the wireless range of its __________.

A. bridges
B. access points
C. gateways
D. routers
Answer» C. gateways
386.

The __________ of a network refers to the network's capability to change as needed to meet the expanding needs of an organization or home.

A. scalability
B. interoperability
C. portability
D. flexibility
Answer» B. interoperability
387.

In a software world, __________ refers to the capability of a software program to run on different operating systems or hardware models.

A. scalability
B. portability
C. flexibility
D. interoperability
Answer» C. flexibility
388.

Standards-based systems provide the assurance that all equipment manufactured to the same standard will be __________.

A. portable
B. scalable
C. interoperable
D. flexible
Answer» D. flexible
389.

GPS is an acronym for Global __________ System.

A. portability
B. policing
C. political
D. positioning
Answer» E.