Explore topic-wise MCQs in Graduate Aptitude Test (GATE).

This section includes 99 Mcqs, each offering curated multiple-choice questions to sharpen your Graduate Aptitude Test (GATE) knowledge and support exam preparation. Choose a topic below to get started.

51.

Mahatama Gandhi was known for his humility as

A. he played an important role in humiliating exit of British from India.
B. he worked for humanitarian causes.
C. he displayed modesty in his interactions.
D. he was a fine human being.
Answer» D. he was a fine human being.
52.

The Headmaster ___________ to speak to you. 

Which of the following options is incorrect to complete the above sentence?

A. is wanting
B. wants
C. want
D. was wanting
Answer» D. was wanting
53.

If 3 ≤ X ≤ 5 and 8 ≤ Y ≤ 11 then which of the following options is TRUE?

A. 3/5 ≤ X/Y ≤ 8/5
B. 3/11 ≤ X/Y ≤ 5/8
C. 3/11 ≤ X/Y ≤ 8/5
D. 3/5 ≤ X/Y ≤ 8/11
Answer» C. 3/11 ≤ X/Y ≤ 8/5
54.

The uniaxial compressive strength of a limestone sample is 80 MPa. The sample is confined at a pressure of 20 MPa in a triaxial compressive strength test. Based on Hoek-Brown failure criteria the maximum principal stress at failure in MPa is 

(consider rock constants as m = 7.88, s = 1.0 and a = 0.5)

A. 117.9
B. 132.3
C. 137.9
D. 157.9
Answer» E.
55.

A cylindrical rock specimen of diameter 54 mm has Young’s modulus of 68.97 GPa and Poisson’s ratio of 0.35. The rock specimen fails in uniaxial compression at a lateral strain of 0.01%. The axial load at failure in kN is __________

A. 34.6 to 35.3
B. 44.8 to 45.5
C. 54.7 to 55.3
D. 12.6 to 13.3
Answer» C. 54.7 to 55.3
56.

 For a shrinkage stope the following data values are given

Insitu tonnage                   9000 tonne

Insitu grade                       5.2 g/tonne

Average grade of waste  1.4 g/tonne

Loss of ore in the stope  10%

Dilution                              20%

The grade at the mill-head in g/tonne is ________

A. 4.5 to 4.518
B. 4.2 to 4.215
C. 6.3 to 6.344
D. 1.3 to 1.367
Answer» B. 4.2 to 4.215
57.

In an experiment to study coal dust explosibility, it is found that at least 3.0 g of limestone dust should be added to a sample of 2.0 g of coal dust to ensure that propagation of flame does not take place. The explosibility factor of coal dust is

A. 60.00
B. 20.00
C. 6.70
D. 1.50
Answer» E.
58.

 Two meshing spur gear wheels of Module 6 have 24 and 42 teeth. The distance in mm between the centres of the gear wheels is

A. 1000
B. 198
C. 126
D. 72
Answer» C. 126
59.

In a belt conveyor system, function of the snub pulley is to

A. clean the inner surface of the belt
B. clean the outer surface of the belt
C. increase the angle of contact of belt with drive drum
D. decrease the belt tension
Answer» D. decrease the belt tension
60.

Under standard temperature and pressure conditions the theoretical maximum height in m to which water can be lifted using an air-lift pump is

A. 10.33
B. 9.61
C. 7.45
D. 6.05
Answer» B. 9.61
61.

 The number of ways in which the letters in the word MINING can be arranged is

A. 90
B. 180
C. 360
D. 720
Answer» C. 360
62.

An emulsion explosive of specific gravity 1.25 is used for blasting in an iron ore formation having P-wave velocity of 3000 m/s and specific gravity of 3.20. For an explosive impedance to rock impedance ratio of 0.5, the desired velocity of detonation of the explosive in m/s is

A. 3840
B. 4000
C. 4200
D. 7680
Answer» B. 4000
63.

Identify the correct statement for a ‘normal distribution’.

A. Mean is greater than mode but less than median
B. Mean is less than mode but greater than median
C. Mean is greater than mode and median
D. Mean, median and mode are equal
Answer» E.
64.

 Among the following options, the specific energy for rock-drilling is lowest in

A. rotary diamond drilling
B. rotary roller drilling
C. percussive drilling
D. jet piercing
Answer» D. jet piercing
65.

Events A and B are independent but NOT mutually exclusive. If the probabilities P(A) and P(B) are 0.5 and 0.4 respectively, then P(A ∪ B) is

A. 0.6
B. 0.7
C. 0.8
D. 0.9
Answer» C. 0.8
66.

The pressure on a phreatic surface is

A. less than atmospheric pressure
B. greater than atmospheric pressure
C. equal to atmospheric pressure
D. independent of atmospheric pressure
Answer» D. independent of atmospheric pressure
67.

Incubation period is NOT related to

A. crossing point temperature of coal
B. panel size
C. seam thickness
D. explosibility of coal dust
Answer» E.
68.

 Transit theodolite is a

A. micro-optic theodolite
B. theodolite with face left and face right reading facilities
C. theodolite with stadia hairs
D. theodolite with two vertical circles
Answer» C. theodolite with stadia hairs
69.

 Rill stoping method is a form of

A. block caving
B. artificially supported stoping
C. underhand stoping
D. overhand stoping
Answer» E.
70.

Long-hole drilling with crater blasting is used for the construction of

A. winze
B. shaft
C. raise
D. decline
Answer» D. decline
71.

For a 25 mm diameter spherical charge, the maximum allowable charge length in cm is

A. 15.0
B. 25.0
C. 30.0
D. 150.0
Answer» B. 25.0
72.

In the Moh’s scale of hardness, the minerals in increasing sequence of hardness are

A. calcite, gypsum, topaz, diamond
B. topaz, gypsum, calcite, diamond
C. calcite, gypsum, diamond, topaz
D. gypsum, calcite, topaz, diamond
Answer» E.
73.

If the transpose of a matrix is equal to its inverse, then the matrix is

A. symmetric
B. orthogonal
C. skew symmetric
D. singular
Answer» C. skew symmetric
74.

In the Coward flammability diagram, the respective percentages of methane and oxygen at the nose limit are

A. 14.2, 0.0
B. 14.1, 18.2
C. 5.8, 12.1
D. 5.0, 19.2
Answer» D. 5.0, 19.2
75.

The size of the Theodolite is defined according to the:

A. Diameter of graduated horizontal circle.
B. Length of the telescope.
C. Height of the standard.
D. All the above are correct.
Answer» B. Length of the telescope.
76.

 The ore reserves for which tonnage and grade are computed party from specific
Measurements and partly from projection for a reasonable distance on geologic evidence is
Known as:

A. Proved or measured ore reserves
B. Probable or indicated ore reserves.
C. Possible or inferred ore reserves.
D. Actual ore reserves.
Answer» E.
77.

“Minimum stopping width" is the:

A. Average width of the ore body
B. Minimum width of the ore body.
C. Minimum distance between two ore body.
D. Minimum width required for mining.
Answer» E.
78.

The purpose of the bulk sampling of the coal is:

A. To study the wash ability
B. To study the carbon content.
C. To study the method of formation
D. For grading purpose.
Answer» B. To study the carbon content.
79.

 Coning and quartering is:

A. A mining method employed in unconsolidated ground.
B. A mining method employed for the diamond mining.
C. A method employed for obtaining a laboratory sample from the field sample.
D. A cutting and filling method employed in underground mining.
Answer» D. A cutting and filling method employed in underground mining.
80.

When the material collected to represent a rock type, or a formation or an ore body in
the quantitative sense then it is termed as:

A. Specimen.
B. Sample.
C. Both specimen and sample can be used.
D. Quantitative specimen.
Answer» C. Both specimen and sample can be used.
81.

Drift mining is generally employed:

A. For the underground mining.
B. For coal mining.
C. ln the exploitation of placers.
D. In the exploitation of copper ore.
Answer» D. In the exploitation of copper ore.
82.

Horizon mining for coal winning is more suitable where:

A. The coal seams are horizontal.
B. The coal seams are highly disturbed.
C. The coal seams are slightly dipping.
D. The coal seams are found above the earth’s surface.
Answer» E.
83.

The mining methods adopted in Rakha copper mine:

A. Cut and fill method
B. Room and pillar method
C. Post and pillar method.
D. All the above.
Answer» E.
84.

Long wall method is:

A. Generally applicable to thin coal seams.
B. Applied to deep mining.
C. Applicable to thick coal seams
D. Applied to very deep mining and thick coal seams.
Answer» B. Applied to deep mining.
85.

The width of the ore body which can be economically mined is:

A. Stopping width.
B. Assay width.
C. Actual width.
D. Grady width.
Answer» B. Assay width.
86.

 Long wall method is generally employed for:

A. Copper ore mining.
B. lron ore mining.
C. Coal mining
D. Gypsum mining.
Answer» D. Gypsum mining.
87.

 Choose the most suitable answer for Gathering:

A. lt is a opencast mining method.
B. lt is a underground mining method.
C. lt is a mining method, which is used for coal winning.
D. lt is a underground mining method used for small rich ore bodies.
Answer» E.
88.

Strip mining is a method of:

A. Underground mining.
B. Opencast mining with a high degree of mechanization.
C. Horizon mining.
D. Long wall mining.
Answer» C. Horizon mining.
89.

Minimum metal percentage, at which mining is profitable, is known as

A. Average grade
B. Cut off grade.
C. Mill grade.
D. Economical grade.
Answer» C. Mill grade.
90.

 The openings in the mini, which serve as a means of entry is known as:
 

A. Shafts.
B. Edits
C. Cross cut.
D. Stop.
Answer» B. Edits
91.

 Snake holes are:

A. Vertically drilled holes
B. More of less horizontally drilled holes at the foot of a high bench.
C. Inclined drilling holes.
D. Vertically drilled holes with two lateral openings.
Answer» C. Inclined drilling holes.
92.

The mining terminology, exploitation or winning is:

A. The process of blasting
B. The process of extracting the ore or economic mineral from the earth.
C. The process of ventilation.
D. The detailed mapping of the ore body.
Answer» C. The process of ventilation.
93.

Blasting gelatin is made up of:

A. Nitroglycerine and ammonium nitrate
B. Nitroglycerine and sodium nitrate.
C. Nitroglycerine and guncotton
D. Nitroglycerine only.
Answer» D. Nitroglycerine only.
94.

The drill holes which are driven vertically and make the sides of the excavation are
Described as:

A. Easers.
B. Simpers.
C. Dressers.
D. Hole directors.
Answer» D. Hole directors.
95.

High explosives containing:

A. Nitroglycerine.
B. Sodium nitrate
C. Ammonium nitrate.
D. Charcoal sulphur
Answer» B. Sodium nitrate
96.

"Salting" of an ore is done:

A. By adding common salts.
B. By removing salt form the ore.
C. By mixing substances for increasing the values in the ore sample.
D. By mixing substances for lowering the values in the ore samples.
Answer» B. By removing salt form the ore.
97.

 The grade which is available from a property after actual mining is:

A. Computed grade
B. Effective grade.
C. Run - of - mine grade
D. Pit head grade.
Answer» C. Run - of - mine grade
98.

The spacing of the trenches pits and boreholes depend on:

A. The length of the ore body
B. The modes of occurrence of the deposits.
C. The depth of the deposits.
D. The outcrops of the deposits.
Answer» C. The depth of the deposits.
99.

Grab sampling consists in:

A. Picking pieces of ore at one place only
B. Picking pieces of ore at random to make up a sample
C. Picking pieces of coal only.
D. Picking pieces of ore in a grid fashion.
Answer» C. Picking pieces of coal only.