Explore topic-wise MCQs in Electrical Engineering Questions.

This section includes 38 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Engineering Questions knowledge and support exam preparation. Choose a topic below to get started.

1.

When either L or C is increased, the resonant frequency of LC circuit ____________?

A. Remains the same
B. Increases
C. Decreases
D. Insufficient data
Answer» D. Insufficient data
2.

Tuned class C amplifiers are used for RF signals of________________?

A. Low power
B. High power
C. Very high power
D. None of the above
Answer» E.
3.

The voltage gain of a tuned amplifier is____________at resonant frequency

A. Minimum
B. Maximum
C. Half-way between maximum and minimum
D. Zero
Answer» C. Half-way between maximum and minimum
4.

The Q of an LC circuit is given by _________________?

A. 2pfr x R
B. R / 2pfrL
C. 2pfrL / R
D. R2/2pfrL
Answer» D. R2/2pfrL
5.

The Q of a tuned circuit refers to the property of_______________?

A. Sensitivity
B. Fidelity
C. Selectivity
D. None of the above
Answer» D. None of the above
6.

The Q of a tuned amplifier is generally _________________?

A. Less than 5
B. Less than 10
C. More than 10
D. None of the above
Answer» D. None of the above
7.

The Q of a tuned amplifier is 50. If the resonant frequency for the amplifier is 1000kHZ, then bandwidth is __________________?

A. 10kHz
B. 40 kHz
C. 30 kHz
D. 20 kHz
Answer» E.
8.

The dimensions of L/CR are that of _______________?

A. Farad
B. Henry
C. Ohm
D. None of the above
Answer» D. None of the above
9.

In the double tuned circuit, if the mutual inductance between the two tuned circuits is decreased, the level of resonance curve ___________________?

A. Remains the same
B. Is lowered
C. Is raised
D. None of the above
Answer» D. None of the above
10.

In series resonance, there is__________________?

A. Voltage amplification
B. Current amplification
C. Both voltage and current amplification
D. None of the above
Answer» B. Current amplification
11.

In parallel resonance, there is _______________?

A. Both voltage and current amplification
B. Voltage amplifications
C. Current amplification
D. None of the above
Answer» D. None of the above
12.

In parallel resonance, the circuit impedance is_________________?

A. C/LR
B. R/LC
C. CR/L
D. L/CR
Answer» E.
13.

In a parallel LC circuit, if the signal frequency is decreased below the resonant frequency, then________________?

A. XL decreases and XC increases
B. XL increases and XC decreases
C. Line current becomes minimum
D. None of the above
Answer» B. XL increases and XC decreases
14.

In a parallel LC circuit, if the input signal frequency is increased above resonant frequency then _______________?

A. XL increases and XC decreases
B. XL decreases and XC increases
C. Both XL and XC increase
D. Both XL and XC decrease
Answer» B. XL decreases and XC increases
15.

If the resistance of a tuned circuit is increased, the Q of the circuit _______________?

A. Is increased
B. Is decreased
C. Remains the same
D. None of the above
Answer» C. Remains the same
16.

If Q of an LC circuit increases, then bandwidth ______________?

A. Increases
B. Decreases
C. Remains the same
D. Insufficient data
Answer» C. Remains the same
17.

If L/C ratio of a parallel LC circuit is increased, the Q of the circuit______________?

A. Is decreased
B. Is increased
C. Remains the same
D. None of the above
Answer» C. Remains the same
18.

If a high degree of selectivity is desired, then double-tuned circuit should have ___________ coupling?

A. Loose
B. Tight
C. Critical
D. None of the above
Answer» B. Tight
19.

Frequencies above ______________ kHz are called radio frequencies?

A. 2
B. 10
C. 50
D. 200
Answer» E.
20.

For frequencies below the resonant frequency , a parallel LC circuit behaves as a ______________load?

A. Inductive
B. Resistive
C. Capacitive
D. None of the above
Answer» B. Resistive
21.

For frequencies below resonant frequency, a series LC circuit behaves as a _____________ load?

A. Resistive
B. Capacitive
C. Inductive
D. None of the above
Answer» C. Inductive
22.

For frequencies above the resonant frequency , a series LC circuit behaves as a ____________load?

A. Resistive
B. Inductive
C. Capacitive
D. None of the above
Answer» C. Capacitive
23.

For frequencies above the resonant frequency, a parallel LC circuit behaves as a ____________ load?

A. Capacitive
B. Resistive
C. Inductive
D. None of the above
Answer» B. Resistive
24.

Double tuned circuits are used in ____________ stages of a radio receiver?

A. IF
B. Audio
C. Output
D. None of the above
Answer» B. Audio
25.

At series resonance, voltage across L is____________voltage across C?

A. Equal to but opposite in phase to
B. Equal to but in phase with
C. Greater than but in phase with
D. Less than but in phase with
Answer» B. Equal to but in phase with
26.

At series resonance, the phase angle between applied voltage and circuit is______________?

A. 90o
B. 180o
C. 0o
D. None of the above
Answer» D. None of the above
27.

At series resonance, the net reactive component of circuit current is _______________?

A. Zero
B. Inductive
C. Capacitive
D. None of the above
Answer» B. Inductive
28.

At series resonance, the circuit offers____________ impedance?

A. Zero
B. Maximum
C. Minimum
D. None of the above
Answer» D. None of the above
29.

At series or parallel resonance, the circuit power factor is ________________?

A. 0
B. 5
C. 1
D. 8
Answer» D. 8
30.

At series or parallel resonance, the circuit behaves as a ______________ load?

A. Capacitive
B. Resistive
C. Inductive
D. None of the above
Answer» C. Inductive
31.

At parallel resonance, the ratio L/C is ______________?

A. Very large
B. Zero
C. Small
D. None of the above
Answer» B. Zero
32.

At parallel resonance, the phase angle between the applied voltage and circuit current is _____________?

A. 90o
B. 180o
C. 0o
D. None of the above
Answer» D. None of the above
33.

At parallel resonance, the net reactive component circuit current is _______________?

A. Capacitive
B. Zero
C. Inductive
D. None of the above
Answer» C. Inductive
34.

At parallel resonance, the line current is_______________?

A. Minimum
B. Maximum
C. Quite large
D. None of the above
Answer» B. Maximum
35.

A tuned amplifier is used in ___________ applications?

A. Radio frequency
B. Low frequency
C. Audio frequency
D. None of the above
Answer» B. Low frequency
36.

A tuned amplifier uses__________load?

A. Resistive
B. Capacitive
C. LC tank
D. Inductive
Answer» D. Inductive
37.

A tuned amplifier is generally operated in ____________operation?

A. Class A
B. Class C
C. Class B
D. None of the above
Answer» C. Class B
38.

A resonant circuit contains ____________elements?

A. R and L only
B. R and C only
C. Only R
D. L and C
Answer» E.