MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 2171 Mcqs, each offering curated multiple-choice questions to sharpen your Current Affairs knowledge and support exam preparation. Choose a topic below to get started.
| 301. |
Out of the three basic doshas in Ayurveda, the pitta dosha is linked to which one of the followingfive classical elements? |
| A. | Fire |
| B. | Air |
| C. | Space |
| D. | Earth |
| Answer» B. Air | |
| 302. |
API means |
| A. | Active Pharmaceutical incorporation |
| B. | Active Pharmaceutical intake |
| C. | Active Pharmaceutical ingredient |
| D. | Active Pharmaceutical interaction |
| Answer» D. Active Pharmaceutical interaction | |
| 303. |
Most commonly used natural diluents is |
| A. | Lactose |
| B. | Methyl cellulose |
| C. | Corn starch |
| D. | Talc |
| Answer» B. Methyl cellulose | |
| 304. |
To construct the boiler foundation on weak soil, the concrete |
| A. | Piles and cellular are used |
| B. | Cellular and raft are used |
| C. | Raft and piles are used |
| D. | Raft, pile and cellular are used |
| Answer» D. Raft, pile and cellular are used | |
| 305. |
Which of the factors are not considered for deciding the alignment |
| A. | Designing the machine |
| B. | The type and application of the machine |
| C. | The grade of accuracy is demanded |
| D. | The condition of the machine |
| Answer» B. The type and application of the machine | |
| 306. |
In welding symbol, if the symbol is above the baseline then the welding is to be done at |
| A. | The arrow side |
| B. | Other side of the arrow |
| C. | Right side of the arrow |
| D. | Both side of the arrow |
| Answer» C. Right side of the arrow | |
| 307. |
In which of the following process, heat is created by blacksmith fire |
| A. | Forge welding |
| B. | Spot welding |
| C. | Projection welding |
| D. | Seam welding |
| Answer» B. Spot welding | |
| 308. |
Full of the WPS is |
| A. | Welding Procedure Specification |
| B. | Welding Process System |
| C. | Welding Process Specification |
| D. | Welding Procedure System |
| Answer» B. Welding Process System | |
| 309. |
The equipments used for erection work are |
| A. | Chain pulley block |
| B. | Rope and chain |
| C. | Rollers |
| D. | All of them |
| Answer» E. | |
| 310. |
In oxy-acetylene welding colour of oxygen cylinder is |
| A. | Red |
| B. | Maroon |
| C. | Black |
| D. | Brown |
| Answer» D. Brown | |
| 311. |
Static type power sources include |
| A. | Transformer, Motor-driven generator |
| B. | Rectifier, Engine-driven Generator |
| C. | Transformer, Rectifier |
| D. | Motor-driven generator, Engine-driven generator |
| Answer» D. Motor-driven generator, Engine-driven generator | |
| 312. |
Which process allows fusion welds of great depth with minimum width? |
| A. | Electron beam welding |
| B. | Ultrasonic welding |
| C. | Plasma arc welding |
| D. | Friction welding |
| Answer» B. Ultrasonic welding | |
| 313. |
For 0.5 to 15 mm thick plates are welded using |
| A. | Single-V & Single-U edges |
| B. | Double-V Edges |
| C. | Double-V & Double-U edge |
| D. | Square face edge |
| Answer» B. Double-V Edges | |
| 314. |
In the welding position, an angle between weld root line and horizontal reference plane is known as |
| A. | Slope |
| B. | Rotation |
| C. | all |
| D. | none |
| Answer» B. Rotation | |
| 315. |
Which of the following joint have high corrosion resistance? |
| A. | Welding joint |
| B. | Riveted joint |
| C. | Bolted joint |
| D. | None of the above |
| Answer» B. Riveted joint | |
| 316. |
The Weldability of the metals in descending order |
| A. | Iron, Steel, Cast iron, Low Alloy steel |
| B. | Steel, Cast iron, Iron, Low Alloy steel |
| C. | Iron, Cast iron, steel, low Alloy steel |
| D. | Steel, Iron, Cast iron, Low Alloy steel |
| Answer» B. Steel, Cast iron, Iron, Low Alloy steel | |
| 317. |
The negative pole of the electrode burns away faster than the positive pole. |
| A. | True |
| B. | False |
| C. | all |
| D. | none |
| Answer» C. all | |
| 318. |
An example of an anodic coating is _____ |
| A. | Zinc |
| B. | Copper |
| C. | Nickel |
| D. | Chromium |
| Answer» B. Copper | |
| 319. |
The foundation bolt which is most popular for the small and light machine is |
| A. | Hook bolt |
| B. | L Type bolt |
| C. | Ragged foundation bolt |
| D. | Square-headed foundation bolt |
| Answer» D. Square-headed foundation bolt | |
| 320. |
Which type of weld is used lying in the same plane |
| A. | Butt Joint |
| B. | Edge Joint |
| C. | Lap Joint |
| D. | Corner Joint |
| Answer» B. Edge Joint | |
| 321. |
During edge preparation bevel angle is |
| A. | 15º |
| B. | 30º |
| C. | 40º |
| D. | 60º |
| Answer» D. 60º | |
| 322. |
For the vertical position of the weld fillet and other symbols should saw in which side |
| A. | Right |
| B. | Left |
| C. | Bottom |
| D. | Above |
| Answer» C. Bottom | |
| 323. |
During the blasting method pressure range used for ferrous metals is |
| A. | 0.4 KPa to 0.7 MPa |
| B. | 0.4 MPa to 0.7 MPa |
| C. | 70 KPa to 0.4 MPa |
| D. | 0.4 KPa to 0.7 kPa |
| Answer» C. 70 KPa to 0.4 MPa | |
| 324. |
Which of the following is/are surface finishing methods? |
| A. | grinding |
| B. | brushing |
| C. | both |
| D. | none |
| Answer» D. none | |
| 325. |
Which welding process is used to join two thick plates in one single pass? |
| A. | Oxy-acetylene welding |
| B. | Gas tungsten arc welding (TIG) |
| C. | Gas metal arc welding (MIG) |
| D. | Electroslag welding |
| Answer» E. | |
| 326. |
With an increase in the heatinput of arc welding method, how does it affectthe requiredcurrent? |
| A. | Increases |
| B. | Decreases |
| C. | Remains same |
| D. | No relation |
| Answer» B. Decreases | |
| 327. |
Compressed air passed through the atomizer nozzle in |
| A. | Air spray gun |
| B. | Airless spray gun |
| C. | Electrostatic spray gun |
| D. | All of them |
| Answer» B. Airless spray gun | |
| 328. |
Which of the method is not a surface cleaning method |
| A. | Mechanical cleaning method |
| B. | Electrical cleaning method |
| C. | Abrasive cleaning method |
| D. | Thermal cleaning method |
| Answer» C. Abrasive cleaning method | |
| 329. |
The shape of slots made during edge preparation is based on |
| A. | Joint design |
| B. | Thickness of material |
| C. | Joint strength required |
| D. | All of the above |
| Answer» E. | |
| 330. |
For a test chart for the lathe machine I.S. code is |
| A. | I.S. 1878 |
| B. | I.S. 2200 |
| C. | I.S. 2310 |
| D. | I.S. 1100 |
| Answer» B. I.S. 2200 | |
| 331. |
In oxy-acetylene gas welding heat is obtained by |
| A. | An electric ac |
| B. | Gas Flame |
| C. | Chemical |
| D. | None of these |
| Answer» C. Chemical | |
| 332. |
Ground Connection equipment is used for ______ welding |
| A. | Gas welding |
| B. | Arc Welding |
| C. | all |
| D. | none |
| Answer» C. all | |
| 333. |
Inwhichwelding the surfacesoftwo components are subjected to static normalforce and oscillating shear stress? |
| A. | Diffusion welding |
| B. | Thermit welding |
| C. | Laser beam welding |
| D. | Ultrasonic welding |
| Answer» E. | |
| 334. |
For constructing building and bridge fabrication and erection of structural steel codes are prepared by |
| A. | BIS |
| B. | IS |
| C. | AISC |
| D. | All of them |
| Answer» D. All of them | |
| 335. |
Which ofthe following non destructive testing is used to detect change incomposition ofany material? |
| A. | Liquid penetration test |
| B. | Ultrasonic test |
| C. | Eddy current test |
| D. | Radiography |
| Answer» E. | |
| 336. |
The process which employ an exothermal chemical reaction to develop high temperature |
| A. | Electroslag welding |
| B. | Plasmaarcwelding |
| C. | Thermit welding |
| D. | Stud welding |
| Answer» D. Stud welding | |
| 337. |
The work of placing the machine on a foundation and then clamping it by thefoundation bolts with the foundation is called |
| A. | Installation |
| B. | Commissioning |
| C. | Erection |
| D. | Fitting |
| Answer» D. Fitting | |
| 338. |
Full form of FB is Welding process is |
| A. | Friction brazing |
| B. | Furnace brazing |
| C. | Function brazing |
| D. | Finish brazing |
| Answer» C. Function brazing | |
| 339. |
In arc welding, the three elements to be controlled to obtain satisfactory weldingoperation are |
| A. | Current, voltage and speed of travel |
| B. | Current, voltage and arc length |
| C. | Current, arc length and speedoftravel |
| D. | Voltage, arc length and speed oftravel |
| Answer» B. Current, voltage and arc length | |
| 340. |
Which type of butt joint is used to joint 9 mm to 13 mm thick plate |
| A. | Single-V or Single-U butt joint |
| B. | Double-V or double-U butt joint |
| C. | all |
| D. | none |
| Answer» B. Double-V or double-U butt joint | |
| 341. |
Which ofthe following does not holdtrue aboutlaserbeamwelding? |
| A. | Laser welding cannot be used in case ofjoints atintricate locations |
| B. | It can produce tiny welds |
| C. | Laser welding can be used for avariety of metal combinations |
| D. | In case of LBW, thin welds on small diameter wires are less susceptible to burn back |
| Answer» B. It can produce tiny welds | |
| 342. |
What is the capacity of an automatic welding machine? |
| A. | 100 to200A |
| B. | 300 to 400A |
| C. | 500 to700A |
| D. | 800 to 3000A |
| Answer» E. | |
| 343. |
When two plates are to be joined by keeping their surface at about 90º toone-another |
| A. | Lap joint |
| B. | Butt Joint |
| C. | Tee Joint |
| D. | Corner Joint |
| Answer» D. Corner Joint | |
| 344. |
When the surface has complex shapes, the abrasive cleaning can be done or not? |
| A. | yes |
| B. | No |
| C. | all |
| D. | none |
| Answer» C. all | |
| 345. |
The mixture of 1 : 3 :5 is found suitable for construction foundation for a |
| A. | Boiler |
| B. | Centrifugal pump |
| C. | Pipe |
| D. | All of these |
| Answer» C. Pipe | |
| 346. |
Which of the following is/are surface fabricated structures? |
| A. | bridge |
| B. | pressure vessels |
| C. | both |
| D. | none |
| Answer» D. none | |
| 347. |
In India in large numbers of steel plants, oil refineries and fertilizer plants for vertical tanks and hortoneshere fabricated using ____ material |
| A. | Cast iron |
| B. | Mild Steel |
| C. | A & B both |
| D. | None of these |
| Answer» C. A & B both | |
| 348. |
During the blasting method pressure range used for Non-ferrous metals is |
| A. | 0.4 KPa to 0.7 MPa |
| B. | 0.4 MPa to 0.7 MPa |
| C. | 70 KPa to 0.4 MPa |
| D. | 0.4 KPa to 0.7 kPa |
| Answer» D. 0.4 KPa to 0.7 kPa | |
| 349. |
During fabrication which processes are included |
| A. | Welding |
| B. | Brazing |
| C. | Soldering |
| D. | All of the above |
| Answer» E. | |
| 350. |
Which is not the main activities for erecting an equipment |
| A. | Designing |
| B. | Measurement |
| C. | Alignment |
| D. | Loading and unloading |
| Answer» B. Measurement | |