730 + Mcqs in Technical Drawing Page 15 McqOptions

701.	When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A.	Baseline and continuous
B.	Baseline and linear
C.	Quick dim and linear
D.	Linear and continuous
Answer» E.

Discussion

702.	The lines used to create the auxiliary view should appear as ________ in the finished view.
A.	Object lines
B.	Construction lines
C.	Reference lines
D.	Construction lines
Answer» B. Construction lines

Discussion

703.	The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
A.	Width
B.	height
C.	length
D.	none of the above
Answer» B. height

Discussion

704.	The principle reason for using an auxiliary view is ________.
A.	to eliminate hidden lines
B.	to create a true projection plane from an inclined plane in one of the primary views
C.	to show cylinders as ellipses
D.	to locate center marks
Answer» C. to show cylinders as ellipses

Discussion

705.	Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:
A.	Circular
B.	Elliptical
C.	Lengthened
D.	Angular
Answer» C. Lengthened

Discussion

706.	When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
A.	Linear dimension
B.	Aligned dimension
C.	Baseline dimension
D.	Angle dimension
Answer» C. Baseline dimension

Discussion

707.	Manufacturing may produce these types of products:
A.	Discrete or continuous
B.	Raw material or parts
C.	Machinery or manufactured
D.	Processes or operations
Answer» B. Raw material or parts

Discussion

708.	If a plane intersects a contoured surface, no line is drawn to represent the edge.
A.	True
B.	False
Answer» C.

Discussion

709.	Right-hand and left-hand parts are mirror images and are made to be interchangeable.
A.	True
B.	False
Answer» C.

Discussion

710.	A keyway is a small groove cut around the diameter of a cylinder, often where it changes diameter.
A.	True
B.	False
Answer» C.

Discussion

711.	A plane surface cannot intersect or be tangent to a contoured surface.
A.	True
B.	False
Answer» C.

Discussion

712.	Small curves called runouts are used to represent fillets that connect with plane surfaces tangent to cylinders.
A.	True
B.	False
Answer» B. False

Discussion

713.	This is a hollow cylinder that is often used as a protective sleeve or guide or as a bearing:
A.	Lug
B.	Bushing
C.	Chamfer
D.	Knurl
Answer» C. Chamfer

Discussion

714.	This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
A.	Lug
B.	Boss
C.	Chamfer
D.	Spotface
Answer» B. Boss

Discussion

715.	This type of pipe is commonly used for water or gas service, and also as soil pipe:
A.	PVC
B.	Copper
C.	Steel
D.	Cast-iron
Answer» E.

Discussion

716.	This is used in applications for nonferrous construction:
A.	Copper tubing
B.	Steel pipe
C.	PVC pipe
D.	Iron tubing
Answer» B. Steel pipe

Discussion

717.	This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
A.	Boss
B.	Spotface
C.	Counterbore
D.	Countersink
Answer» E.

Discussion

718.	This is an angled surface used on cylinders to make them easier to handle:
A.	Fillet
B.	Taper
C.	Chamfer
D.	Lug
Answer» D. Lug

Discussion

719.	This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
A.	Computer-aided manufacturing
B.	Computer-aided design
C.	Computer-aided engineering
D.	Computer-aided prototyping
Answer» C. Computer-aided engineering

Discussion

720.	These are used to attach parts to a cylinder so they won't turn on it:
A.	Lugs and bearings
B.	Keyseats and bearings
C.	Knurls and keys
D.	Keys and keyways/keyseats
Answer» E.

Discussion

721.	This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
A.	Computer-aided manufacturing
B.	Computer-aided design
C.	Computer-aided engineering
D.	Computer-aided prototyping
Answer» D. Computer-aided prototyping

Discussion

722.	This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:
A.	Fused deposition modeling
B.	Stereolithography apparatus
C.	Solid ground curing
D.	Selective laser sintering
Answer» E.

Discussion

723.	This process recognizes the inherent interrelationships between design and manufacturing:
A.	Design for manufacture
B.	Design for manufacture and assembly
C.	Design for concurrent engineering
D.	Design for assembly
Answer» C. Design for concurrent engineering

Discussion

724.	The most common geometric form used in gears today is this:
A.	Involute profile
B.	Convolute profie
C.	Base circle
D.	Spur circle
Answer» B. Convolute profie

Discussion

725.	This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
A.	Displacement diagram
B.	Follower
C.	Cam cycle
D.	Reciprocation chart
Answer» B. Follower

Discussion

726.	Spur gear design normally begins with selecting this:
A.	Rack size
B.	Tooth size
C.	Gear size
D.	Pitch diameter
Answer» E.

Discussion

727.	In this type of drawing, vertical pipes may be revolved into the horizontal plane:
A.	Standard view
B.	Elevation view
C.	Transverse piping
D.	Developed piping
Answer» E.

Discussion

728.	When dimensioning piping drawings, you give the lengths of all runs of this type:
A.	Straight
B.	Angular
C.	Filleted
D.	Transverse
Answer» B. Angular

Discussion

729.	This type of drawing shows two lines representing the pipe diameter:
A.	Single-line
B.	Double-line
C.	Standard piping
D.	Centerline piping
Answer» C. Standard piping

Discussion

730.	Gear teeth formed on a flat surface are called this:
A.	Pinion
B.	Rack
C.	Spur
D.	Teeth
Answer» C. Spur

Discussion

Explore topic-wise MCQs in Engineering.

When dimensioning architectural drawings architects will utilize both and options.

The lines used to create the auxiliary view should appear as ________ in the finished view.

The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.

The principle reason for using an auxiliary view is ________.

Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.

Manufacturing may produce these types of products:

If a plane intersects a contoured surface, no line is drawn to represent the edge.

Right-hand and left-hand parts are mirror images and are made to be interchangeable.

A keyway is a small groove cut around the diameter of a cylinder, often where it changes diameter.

A plane surface cannot intersect or be tangent to a contoured surface.

Small curves called runouts are used to represent fillets that connect with plane surfaces tangent to cylinders.

This is a hollow cylinder that is often used as a protective sleeve or guide or as a bearing:

This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:

This type of pipe is commonly used for water or gas service, and also as soil pipe:

This is used in applications for nonferrous construction:

This is a conical-shaped recess around a hole, often used to receive a tapered screw head:

This is an angled surface used on cylinders to make them easier to handle:

This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:

These are used to attach parts to a cylinder so they won't turn on it:

This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:

This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

This process recognizes the inherent interrelationships between design and manufacturing:

The most common geometric form used in gears today is this:

This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:

Spur gear design normally begins with selecting this:

In this type of drawing, vertical pipes may be revolved into the horizontal plane:

When dimensioning piping drawings, you give the lengths of all runs of this type:

This type of drawing shows two lines representing the pipe diameter:

Gear teeth formed on a flat surface are called this:

Explore topic-wise MCQs in Engineering.

When dimensioning architectural drawings architects will utilize both ________ and ________ options.

The lines used to create the auxiliary view should appear as ________ in the finished view.

The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.

The principle reason for using an auxiliary view is ________.

Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:

When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.

Manufacturing may produce these types of products:

If a plane intersects a contoured surface, no line is drawn to represent the edge.

Right-hand and left-hand parts are mirror images and are made to be interchangeable.

A keyway is a small groove cut around the diameter of a cylinder, often where it changes diameter.

A plane surface cannot intersect or be tangent to a contoured surface.

Small curves called runouts are used to represent fillets that connect with plane surfaces tangent to cylinders.

This is a hollow cylinder that is often used as a protective sleeve or guide or as a bearing:

This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:

This type of pipe is commonly used for water or gas service, and also as soil pipe:

This is used in applications for nonferrous construction:

This is a conical-shaped recess around a hole, often used to receive a tapered screw head:

This is an angled surface used on cylinders to make them easier to handle:

This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:

These are used to attach parts to a cylinder so they won't turn on it:

This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:

This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:

This process recognizes the inherent interrelationships between design and manufacturing:

The most common geometric form used in gears today is this:

This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:

Spur gear design normally begins with selecting this:

In this type of drawing, vertical pipes may be revolved into the horizontal plane:

When dimensioning piping drawings, you give the lengths of all runs of this type:

This type of drawing shows two lines representing the pipe diameter:

Gear teeth formed on a flat surface are called this:

When dimensioning architectural drawings architects will utilize both and options.