Explore topic-wise MCQs in Power Systems.

This section includes 8 Mcqs, each offering curated multiple-choice questions to sharpen your Power Systems knowledge and support exam preparation. Choose a topic below to get started.

1.

IF_A_TRANSFORMER_IS_PROVIDED_WITH_DIFFERENTIALLY_CONNECTED_RELAY._TO_PREVENT_THE_MAL_OPERATION_OF_THE_RELAY,_THE_RELAY_RELAY_OPERATING_COIL_IS_BIASED_WITH_______?$

A. 3rd harmonic
B. 2nd harmonic
C. 7th harmonic
D. 5th harmonic
Answer» E.
2.

The frequency of the carrier in the case of carrier-current-pilot scheme is in the range of _________$

A. 50 kHz-500 kHz
B. 1 kHz-10 kHz
C. 25 kHz-50 kHz
D. 15 kHz-25kHz
Answer» B. 1 kHz-10 kHz
3.

If_a_transformer_is_provided_with_differentially_connected_relay._To_prevent_the_mal_operation_of_the_relay,_the_relay_restraining_coil_is_biased_with_______________$

A. 3rd harmonic
B. 2nd harmonic
C. 7th harmonic
D. 5th harmonic
Answer» C. 7th harmonic
4.

While a transformer is energised, the differentially connected relay wil?

A. mal operate
B. not mal operate
C. mal operate for lagging loads
D. never mal operate
Answer» B. not mal operate
5.

The neutral of the three phase 20 MVA, 11kV alternator is earthed through a resistance of 5 ohms, the relay is set to operate when there is an out of balance current of 1.5 A. The CTs have a ratio of 100/5. What should be the minimum value of the earthing resistance to protect 90% of winding?

A. 2.12 Ω
B. 1.12 Ω
C. 4.24 Ω
D. 3.24 Ω
Answer» B. 1.12 ‚âà√≠¬¨¬©
6.

The neutral of the three phase 20 MVA, 11kV alternator is earthed through a resistance of 5 ohms, the relay is set to operate when there is an out of balance current of 1.5 A. The CTs have a ratio of 100/5. What percentage of the winding is protected against L-G faults?

A. 76.4
B. 77.8
C. 73
D. None of the mentioned
Answer» E.
7.

A three phase transformer having a line voltage ratio of 400/33000 V is connected in the star-delta. The CTs on the 400V side have a CT ratio of 1000/5. What must be the ratio of CTs on the 33000 side?

A. 7/5
B. 5/7
C. 3/5
D. 5/2
Answer» B. 5/7
8.

The factor which influences the acr de ionisation dominantly ________

A. line voltage
B. magnitude of transient fault current
C. speed of reclosure
D. all of the mentioned
Answer» B. magnitude of transient fault current