The factor which influences the acr de ionisation dominantly ________ – McqOptions

MCQOPTIONS

1.	The factor which influences the acr de ionisation dominantly ________
A.	line voltage
B.	magnitude of transient fault current
C.	speed of reclosure
D.	all of the mentioned
Answer» B. magnitude of transient fault current

Discussion

No Comment Found

Related MCQs

IF_A_TRANSFORMER_IS_PROVIDED_WITH_DIFFERENTIALLY_CONNECTED_RELAY._TO_PREVENT_THE_MAL_OPERATION_OF_THE_RELAY,_THE_RELAY_RELAY_OPERATING_COIL_IS_BIASED_WITH_______?$
The frequency of the carrier in the case of carrier-current-pilot scheme is in the range of _________$
If_a_transformer_is_provided_with_differentially_connected_relay._To_prevent_the_mal_operation_of_the_relay,_the_relay_restraining_coil_is_biased_with_______________$
While a transformer is energised, the differentially connected relay wil?
The neutral of the three phase 20 MVA, 11kV alternator is earthed through a resistance of 5 ohms, the relay is set to operate when there is an out of balance current of 1.5 A. The CTs have a ratio of 100/5. What should be the minimum value of the earthing resistance to protect 90% of winding?
The neutral of the three phase 20 MVA, 11kV alternator is earthed through a resistance of 5 ohms, the relay is set to operate when there is an out of balance current of 1.5 A. The CTs have a ratio of 100/5. What percentage of the winding is protected against L-G faults?
A three phase transformer having a line voltage ratio of 400/33000 V is connected in the star-delta. The CTs on the 400V side have a CT ratio of 1000/5. What must be the ratio of CTs on the 33000 side?
The factor which influences the acr de ionisation dominantly ________