MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 262 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Fundamentals knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Boundary value analysis is the technique comes under…… |
| A. | white box testing |
| B. | black box testing |
| C. | gray box testing |
| D. | none of the above. |
| Answer» C. gray box testing | |
| 2. |
Cyclomatic complexity is carried out in…. |
| A. | black box testing |
| B. | load testing |
| C. | white box testing |
| D. | green box testing |
| Answer» D. green box testing | |
| 3. |
In static testing--------- |
| A. | code is not executed |
| B. | code executed twice |
| C. | code executed repeatedly |
| D. | none of the above. |
| Answer» B. code executed twice | |
| 4. |
LoadRunner create load by running …… |
| A. | load creator |
| B. | virtual users |
| C. | load user |
| D. | none of the above |
| Answer» C. load user | |
| 5. |
……………testing checks performance of system |
| A. | white box testing |
| B. | black box testing |
| C. | performance testing |
| D. | smoke testing |
| Answer» D. smoke testing | |
| 6. |
In software testing Verification is ….. |
| A. | are we building the product right? |
| B. | to checks what we are developing is the right product. |
| C. | are we building the right product? |
| D. | none of the above. |
| Answer» B. to checks what we are developing is the right product. | |
| 7. |
The formula of cyclometric complexity |
| A. | n-e+2 |
| B. | e-n-2 |
| C. | n-2-e |
| D. | n-e+3 |
| Answer» B. e-n-2 | |
| 8. |
Unit testing is carried out by: |
| A. | system user |
| B. | client |
| C. | customers |
| D. | developers |
| Answer» E. | |
| 9. |
It is one principal of testing is that Exhausting Testing is….. |
| A. | impractical but possible |
| B. | possible |
| C. | impractical and impossible |
| D. | impossible |
| Answer» D. impossible | |
| 10. |
In which level testing is performed |
| A. | unit,acceptance,integration,system |
| B. | unit,integration,system, acceptance |
| C. | unit,system,integration,acceptance |
| D. | it is on the nature of software project. |
| Answer» E. | |
| 11. |
Smoke Testing is ……..approach |
| A. | integration testing |
| B. | unit testing |
| C. | stress testing |
| D. | none of the above. |
| Answer» B. unit testing | |
| 12. |
Following is not a technique of black box. |
| A. | equivalence portioning |
| B. | boundary value analysis |
| C. | cause effect graphing |
| D. | statement coverage |
| Answer» E. | |
| 13. |
Following is not a Software Test Life Cycle Phase. |
| A. | requirements gathering |
| B. | test planning |
| C. | test closure |
| D. | test design |
| Answer» B. test planning | |
| 14. |
Which of the following is not a level in testing? |
| A. | system testing |
| B. | black box testing. |
| C. | integration testing |
| D. | functional testing |
| Answer» E. | |
| 15. |
What is the main goal of software testing? |
| A. | testing |
| B. | bug prevention |
| C. | study |
| D. | execution |
| Answer» C. study | |
| 16. |
Which is required skill of a Tester? |
| A. | good programmer |
| B. | reliable |
| C. | attention to details |
| D. | being diplomatic |
| Answer» B. reliable | |
| 17. |
System Testing is ---- |
| A. | black box testing |
| B. | white box testing |
| C. | smoke testing |
| D. | both a) and b) |
| Answer» B. white box testing | |
| 18. |
Sandwich/hybrid strategy is--- |
| A. | top down |
| B. | bottom up |
| C. | combination of top down & bottom up |
| D. | none of the above |
| Answer» D. none of the above | |
| 19. |
Which of the following is not White box testing? |
| A. | structural testing |
| B. | code-based testing |
| C. | glass box testing. |
| D. | closed box testing |
| Answer» E. | |
| 20. |
_________must be developed to describe when and how testing will occur. |
| A. | Test Strategy |
| B. | Test Plan |
| C. | Test Design |
| D. | High Level document |
| Answer» B. Test Plan | |
| 21. |
Use cases and use case diagrams are used to define: |
| A. | Complexity of a system |
| B. | Criticality of a system |
| C. | Stability of a system |
| D. | Behaviour of a system |
| Answer» E. | |
| 22. |
Retesting modules connected to the program or component after a change has beenmade? |
| A. | full regression testing |
| B. | unit regression |
| C. | regional regression |
| D. | retesting. |
| Answer» D. retesting. | |
| 23. |
Scenario-based testing |
| A. | Concentrates on actor and software interaction |
| B. | Misses errors in specifications |
| C. | Misses errors in subsystem interactions |
| D. | Both a and b |
| Answer» D. Both a and b | |
| 24. |
A system maintaining its integrity while accepting a temporary halt in its operation is saidto be in a state of |
| A. | Full Fault Tolerance |
| B. | Graceful Degradation |
| C. | Fail Soft |
| D. | Fail Safe |
| Answer» E. | |
| 25. |
Application should be stable. Clear Design and Flow of the application is neededfor Automation testing. |
| A. | false |
| B. | true |
| Answer» C. | |
| 26. |
Which of these can be successfully tested using Loop Testing methodology? |
| A. | simple loops |
| B. | nested loops |
| C. | concatenated loops |
| D. | all of the above |
| Answer» E. | |
| 27. |
_________ is driven by an Audit or a Risk function to look at a specific control orcompliance issue. |
| A. | security audit |
| B. | vulnerability scan |
| C. | vulnerability assessment |
| D. | penetration test |
| Answer» B. vulnerability scan | |
| 28. |
Acceptance tests are normally conducted by the |
| A. | Developer |
| B. | End users |
| C. | Test team |
| D. | Systems engineers |
| Answer» C. Test team | |
| 29. |
Which of the following issues must be addressed if a successful software testing strategyis to be implemented? |
| A. | Use effective formal technical reviews as a filter prior to testing |
| B. | Develop a testing plan that emphasizes “rapid cycle testing.” |
| C. | State testing objectives explicitly |
| D. | All of the mentioned |
| Answer» E. | |
| 30. |
Path Tested = Number of Path Tested / Total Number of Paths |
| A. | true |
| B. | false |
| Answer» B. false | |
| 31. |
Fault-based testing is best reserved for |
| A. | Conventional software testing |
| B. | Operations and classes those are critical or suspect |
| C. | Use-case validation |
| D. | White-box testing of operator algorithms |
| Answer» C. Use-case validation | |
| 32. |
A deviation from the specified or expected behavior that is visible to end-users is called: |
| A. | An error |
| B. | A fault |
| C. | A failure |
| D. | A defect |
| Answer» D. A defect | |
| 33. |
The testing which is done by going thro’ the code is known as, |
| A. | unit testing |
| B. | blackbox testing |
| C. | white box testing |
| D. | regression testing |
| Answer» D. regression testing | |
| 34. |
Which of the following is not a characteristic for Testability? |
| A. | operability |
| B. | observability |
| C. | simplicity |
| D. | robustness |
| Answer» E. | |
| 35. |
______________ builds upon Vulnerability Assessment by adding manualverification to confirm exposure. |
| A. | security audit |
| B. | security assessment |
| C. | vulnerability assessment |
| D. | penetration test |
| Answer» C. vulnerability assessment | |
| 36. |
Which of the following are characteristics of testable software? |
| A. | Observability |
| B. | Simplicity |
| C. | Stability |
| D. | All of the above |
| Answer» E. | |
| 37. |
Tests derived from behavioral class models should be based on the |
| A. | Data flow diagram |
| B. | Object-relation diagram |
| C. | State diagram |
| D. | Use-case diagram |
| Answer» D. Use-case diagram | |
| 38. |
Maintenance testing is: |
| A. | testing to maintain business advantage |
| B. | testing a released system that has been changed |
| C. | testing by users to ensure that the system meets a business need |
| D. | updating tests when the software has changed |
| Answer» C. testing by users to ensure that the system meets a business need | |
| 39. |
The test cases derived from use cases |
| A. | Are most useful in uncovering the defects in the process flows during real world use of the system. |
| B. | Are most useful in uncovering the defects in the process flows during the testing use of the system. |
| C. | Are most useful in covering the defects in the process flows during real world use of the system. |
| D. | Are most useful in covering the defects at the integration level. |
| Answer» B. Are most useful in uncovering the defects in the process flows during the testing use of the system. | |
| 40. |
Integration testing techniques are |
| A. | Top down |
| B. | Bottom up |
| C. | Sandwich |
| D. | All of the above |
| Answer» E. | |
| 41. |
Special requirements in a use case template define: |
| A. | Business rules |
| B. | Reliability requirements |
| C. | Expectations of the users |
| D. | Associated use cases |
| Answer» B. Reliability requirements | |
| 42. |
________establishes the existence of errors _______locates and corrects the errors. |
| A. | Debugging, testing |
| B. | Testing, Debugging |
| C. | Testing, Verifying |
| D. | Testing, Validation |
| Answer» C. Testing, Verifying | |
| 43. |
During the software development process, at what point can the test process start? |
| A. | when the code is complete. |
| B. | when the design is complete |
| C. | when the software requirements have been approved |
| D. | when the first code module is ready for unit testing |
| Answer» D. when the first code module is ready for unit testing | |
| 44. |
SPICE Means |
| A. | software process improvement and capability determination |
| B. | software process improvement and compatibility determination. |
| C. | software process invention and compatibility determination. |
| D. | software process improvement and control determination |
| Answer» B. software process improvement and compatibility determination. | |
| 45. |
Which of the following is a black box design technique? |
| A. | statement testing |
| B. | error- guessing |
| C. | equivalence partitioning |
| D. | usability testing |
| Answer» D. usability testing | |
| 46. |
Software project manager is engaged with software management activities. He is responsible for ______. |
| A. | Project planning. |
| B. | Monitoring the progress |
| C. | Communication among stakeholders |
| D. | All mentioned above |
| Answer» E. | |
| 47. |
How much testing is enough? |
| A. | this question is easy to answer |
| B. | this question is impossible to answer |
| C. | the answer depends on the risk for your industry, contract and special requirements |
| D. | this answer depends on the maturity of your developers |
| Answer» D. this answer depends on the maturity of your developers | |
| 48. |
The object of ___________within an OO system is to design tests that have a highlikelihood of uncovering plausible bugs. |
| A. | Fault-based testing |
| B. | Integration testing |
| C. | Use-based testing |
| D. | Scenario-based testing |
| Answer» B. Integration testing | |
| 49. |
Which of the following is likely to benefit most from the use of test tools providingtest capture and replay facilities? |
| A. | integration testing |
| B. | regression testing |
| C. | system testing |
| D. | user acceptance testing |
| Answer» C. system testing | |
| 50. |
Deep structure testing is not designed to |
| A. | Examine object behaviors |
| B. | Exercise communication mechanisms |
| C. | Exercise object dependencies |
| D. | Exercise structure observable by the user |
| Answer» B. Exercise communication mechanisms | |