MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 1167 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Science Engineering (CSE) knowledge and support exam preparation. Choose a topic below to get started.
| 401. |
-------------------is represented by organization chart. |
| A. | Formal Information system |
| B. | Closed system |
| C. | MIS |
| D. | DIS |
| Answer» B. Closed system | |
| 402. |
Which one is not a step of requirement engineering?( |
| A. | Requirements elicitation |
| B. | Requirements analysis |
| C. | Requirements design |
| D. | Requirements documentation |
| Answer» D. Requirements documentation | |
| 403. |
An Acquisition cycle time is |
| A. | Unplanned events, which results in injury, damage to property, or to the environment |
| B. | Quantitative measure of the magnitude of error |
| C. | Period that starts when a system is considered and ends when the product meets its initial operational capability |
| D. | All the above |
| Answer» D. All the above | |
| 404. |
MTTF stands for( |
| A. | Mean time to failure |
| B. | Maximum time to failure |
| C. | Minimum time to failure |
| D. | None of the above |
| Answer» B. Maximum time to failure | |
| 405. |
) Site for Beta testing is( |
| A. | Software company |
| B. | User’s site |
| C. | Anywhere |
| D. | All of the above |
| Answer» C. Anywhere | |
| 406. |
Which model is most popular for student’s small projects?( |
| A. | Waterfall model |
| B. | Spiral model |
| C. | Quick and fix model |
| D. | Prototyping model |
| Answer» D. Prototyping model | |
| 407. |
DD path graph is called as( |
| A. | Design to Design Path graph |
| B. | Defect to Defect Path graph |
| C. | Destination to Destination Path graph |
| D. | Decision to decision Path graph |
| Answer» E. | |
| 408. |
In Data recording |
| A. | Here data-flow diagram show, how data is processed at different stages in the system. |
| B. | It registers all/ selected activities of a computer system. |
| C. | Technique used to transform raw data into a more useful form. |
| D. | Data is shifted to modern data base management system. |
| Answer» C. Technique used to transform raw data into a more useful form. | |
| 409. |
___________ This module gets data from super-ordinate and forward it to sub-ordinates. |
| A. | Afferent modules |
| B. | Efferent modules |
| C. | Co-ordinate modules |
| D. | Transform modules. |
| Answer» C. Co-ordinate modules | |
| 410. |
The system modeling is normally referred to |
| A. | An abstract viewing of a system |
| B. | The system running |
| C. | Programming language |
| D. | None of these |
| Answer» B. The system running | |
| 411. |
CASE Tools |
| A. | A measure of the amount of work a system can perform |
| B. | It provides automated support for software process. |
| C. | Support individual process tasks |
| D. | Set of tools to support a particular phase of software process such as design, implementation or testing |
| Answer» D. Set of tools to support a particular phase of software process such as design, implementation or testing | |
| 412. |
Analyst use ----------to learn about feelings, opinions and general experiences or to explorea process or problems. |
| A. | open ended questionnaires |
| B. | Close ended questionnaires |
| C. | Record Inspection |
| D. | Observation |
| Answer» B. Close ended questionnaires | |
| 413. |
Which is not the part of scheduling process? |
| A. | Creating project chart |
| B. | Defining roles/activities |
| C. | Estimating failures |
| D. | Selling product |
| Answer» E. | |
| 414. |
------- The compactness of the program in terms of lines of code. |
| A. | Conciseness |
| B. | Consistency |
| C. | Data commonality |
| D. | Error tolerance |
| Answer» B. Consistency | |
| 415. |
Which one is functional component ? |
| A. | Reliability |
| B. | Maintainability |
| C. | Computation |
| D. | Performance |
| Answer» D. Performance | |
| 416. |
Which of the following is not a business goal of re-engineering? |
| A. | Cost reduction |
| B. | Time reduction |
| C. | Maintainability |
| D. | None of the mentioned |
| Answer» E. | |
| 417. |
)In Logarithmic Poisson execution model, ‘θ’ is known as( |
| A. | Failure intensity function parameter |
| B. | Failure intensity decay parameter |
| C. | Failure intensity measurement |
| D. | Failure intensity increment parameter |
| Answer» C. Failure intensity measurement | |
| 418. |
--------------will be able to interface it with another system. |
| A. | Correctness |
| B. | Interoperability |
| C. | Usability |
| D. | Flexibility |
| Answer» B. Interoperability | |
| 419. |
) McCall has developed a( |
| A. | Quality model |
| B. | Process improvement model |
| C. | Requirement model |
| D. | Design model |
| Answer» B. Process improvement model | |
| 420. |
Conceptual models are useful for which of the following reasons? |
| A. | Understanding problem design |
| B. | Data Requirements and Product design |
| C. | Validating requirements |
| D. | All of the mentioned |
| Answer» E. | |
| 421. |
)The relationship of data elements in a module is called( |
| A. | Coupling |
| B. | Cohesion |
| C. | Modularity |
| D. | None of the above |
| Answer» C. Modularity | |
| 422. |
Modules with _______ must have good cohesion. |
| A. | Factoring |
| B. | Fan-in |
| C. | Fan-out |
| D. | System shape |
| Answer» C. Fan-out | |
| 423. |
Hard real time systems are |
| A. | These system runs on a single processor or an integrated group of processors |
| B. | A system where each sub-system can respond to generated events where the events might be generated from other sub-systems or from the environment of the system. |
| C. | A system continues in operation after some system faults have manifested themselves. |
| D. | A system whose operation is incorrect, if results are not produced according to the timing specifications |
| Answer» E. | |
| 424. |
Which of these software engineering activities are not a part of software processes? |
| A. | Software dependence |
| B. | Software development |
| C. | Software validation |
| D. | Software specification |
| Answer» B. Software development | |
| 425. |
Extendibility is |
| A. | Trustworthiness with which a system or component can be modified to increase its storage or functional capacity |
| B. | Pertaining to a system/component that automatically places itself in a safe operating mode in the event of a failure. |
| C. | Pertaining to a system or component that continues to provide partial operational capability in the event of certain failures. |
| D. | None of these |
| Answer» B. Pertaining to a system/component that automatically places itself in a safe operating mode in the event of a failure. | |
| 426. |
Software consists of |
| A. | Computer program only |
| B. | Computer program and associated documentations |
| C. | Documentation only |
| D. | Hardware |
| Answer» C. Documentation only | |
| 427. |
----------system in one which automatically controls or modifies its own operation byresponding to data generated by the system itself. |
| A. | Open System |
| B. | Closed system |
| C. | MIS |
| D. | DIS |
| Answer» C. MIS | |
| 428. |
--------The use of uniform design and documentation techniques throughout thesoftware development project. |
| A. | Conciseness |
| B. | Consistency |
| C. | Data commonality |
| D. | Error tolerance |
| Answer» C. Data commonality | |
| 429. |
Estimation of size for a project is dependent on( |
| A. | Cost |
| B. | Schedule |
| C. | Time |
| D. | None of the above |
| Answer» E. | |
| 430. |
Mutable requirements are |
| A. | Requirements that change due to the environment in which the organization is operating |
| B. | Emerges due to user’s understanding of system |
| C. | Dependent on particular system |
| D. | None of these |
| Answer» B. Emerges due to user’s understanding of system | |
| 431. |
Which one is not the generic process model ? |
| A. | Waterfall model |
| B. | Evolutionary development |
| C. | Re-use oriented development |
| D. | Marketing model |
| Answer» E. | |
| 432. |
The objective of software engineering is to produce ---------- |
| A. | Software Product |
| B. | Output |
| C. | Input |
| D. | Processing |
| Answer» B. Output | |
| 433. |
In iterative process model, software process represents |
| A. | Sequential activities |
| B. | Cycle of activities |
| C. | Random activities |
| D. | None of these |
| Answer» C. Random activities | |
| 434. |
The Linear Sequential or Classic Life Cycle is also ca |
| A. | Waterfall Model |
| B. | Incremental Model |
| C. | Spiral model |
| D. | Prototyping Model |
| Answer» B. Incremental Model | |
| 435. |
Components such as wheel, chain, handle etc are assembled to produce bicycle. The use of bicycle as transportation device is considered to be |
| A. | Functional property |
| B. | Non-functional property |
| C. | Software system |
| D. | None of these |
| Answer» B. Non-functional property | |
| 436. |
Represents the number of discrete levers in the inheritance tree where subclasses inherit attributes and operations from super classes. |
| A. | Depth of inheritance tree |
| B. | Breath of inheritance tree |
| C. | Radius of inheritance tree |
| D. | None of these Fan- out is referred to |
| Answer» B. Breath of inheritance tree | |
| 437. |
Software design activities involved |
| A. | System programming |
| B. | System operations |
| C. | Component design |
| D. | Component development |
| Answer» D. Component development | |
| 438. |
As the reliability increases, failure intensity( |
| A. | decreases |
| B. | increases |
| C. | no effect |
| D. | None of the above |
| Answer» B. increases | |
| 439. |
The term module used during design phase refers to( |
| A. | Function |
| B. | Procedure |
| C. | Sub program |
| D. | All of the above |
| Answer» E. | |
| 440. |
-------------systems used organizational data as well as external data collected fromenvironment of the organization. |
| A. | Formal Information system |
| B. | Closed system |
| C. | MIS |
| D. | DSS |
| Answer» E. | |
| 441. |
Maintenance plan describes |
| A. | Quality procedure |
| B. | Schedule procedure |
| C. | Maintenance procedure |
| D. | Configuration procedure |
| Answer» D. Configuration procedure | |
| 442. |
A module has _______if there is some logical relationship in the elements of a module. |
| A. | Logical cohesion |
| B. | Temporal cohesion |
| C. | Both A And B |
| D. | None of these |
| Answer» B. Temporal cohesion | |
| 443. |
What fails a project? |
| A. | Lack of anticipation of resources to accomplish tasks |
| B. | Problems faced by rules governing project |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 444. |
Which of the following is a type of software?( |
| A. | System Software |
| B. | Embedded Software |
| C. | Application |
| D. | all of the above |
| Answer» B. Embedded Software | |
| 445. |
RAD Model ha |
| A. | 2 phases |
| B. | 3 phase |
| C. | 5 phases |
| D. | 6 phases |
| Answer» D. 6 phases | |
| 446. |
Which one is not be structured design model ? |
| A. | Data flow model |
| B. | Entity relation model |
| C. | Object-oriented model |
| D. | Debugging |
| Answer» E. | |
| 447. |
Software process involves |
| A. | Software specification and developments |
| B. | Software validation and evolution |
| C. | A and B both |
| D. | None of these |
| Answer» D. None of these | |
| 448. |
The term user requirements |
| A. | Are statements, made in natural language and diagrams of services that system is expected to provide and the constrains on the system |
| B. | The system services and details, can serve as contract between buyer and software developers |
| C. | An abstract description of software design |
| D. | None of these |
| Answer» B. The system services and details, can serve as contract between buyer and software developers | |
| 449. |
Software safety is equivalent to software reliability. |
| A. | True |
| B. | False |
| C. | none |
| D. | all |
| Answer» C. none | |
| 450. |
The DFD depicts( |
| A. | Flow of data |
| B. | Flow of control |
| C. | Both (a) & (b) |
| D. | None of the above |
| Answer» B. Flow of control | |