MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 1167 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Science Engineering (CSE) knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
What is the first step of requirement elicitation? |
| A. | Identifying Stakeholder |
| B. | Listing out Requirements |
| C. | Requirements Gathering |
| D. | All of the mentioned |
| Answer» B. Listing out Requirements | |
| 52. |
Decision table are useful for describing situations in which: |
| A. | An action is taken under varying sets of conditions. |
| B. | Number of combinations of actions is taken under varying sets of conditions |
| C. | No action is taken under varying sets of conditions |
| D. | None of the above |
| Answer» E. | |
| 53. |
Requirements elicitation means |
| A. | Gathering of requirements |
| B. | Capturing of requirements |
| C. | Understanding of requirements |
| D. | All of the above |
| Answer» E. | |
| 54. |
Which one is not a requirements elicitation technique? |
| A. | Interviews |
| B. | The use case approach |
| C. | FAST |
| D. | Data flow diagram. |
| Answer» E. | |
| 55. |
In Boehm s spiral model, each loop in the spiral represents _____ of the softwa |
| A. | phase |
| B. | design |
| C. | documentation |
| D. | none of the above |
| Answer» B. design | |
| 56. |
------------- encompass a broad array of tasks that include project planning andestimation system analysis, design of data structure, program architecture, coding, testingand maintenance. |
| A. | Software engineering tools |
| B. | Software engineering Procedures |
| C. | Software engineering Methods |
| D. | None of these |
| Answer» B. Software engineering Procedures | |
| 57. |
If user participation is available, which model is to be chosen? |
| A. | Waterfall model |
| B. | Iterative enhancement model |
| C. | Spiral model |
| D. | RAD model |
| Answer» E. | |
| 58. |
Which of the following life cycle model can be chosen if the development team has less experience on similar projects? |
| A. | Spiral |
| B. | Waterfall |
| C. | RAD |
| D. | Iterative Enhancement Model |
| Answer» B. Waterfall | |
| 59. |
The term module used during design phase refers to |
| A. | Function |
| B. | Procedure |
| C. | Sub program |
| D. | All of the above |
| Answer» E. | |
| 60. |
__________in this each module and its dub module corresponding to a processing step in the execution sequence. |
| A. | Information hiding criteria |
| B. | Conventional criteria |
| C. | Data abstraction criteria |
| D. | None of these |
| Answer» C. Data abstraction criteria | |
| 61. |
___________ This module gets data from sub-ordinates and forward it to superordinate(boss) modules. |
| A. | Afferent modules |
| B. | Efferent modules |
| C. | Co-ordinate modules |
| D. | Transform modules. |
| Answer» B. Efferent modules | |
| 62. |
Management of software development is dependent on |
| A. | People |
| B. | product |
| C. | Process |
| D. | all of the above |
| Answer» E. | |
| 63. |
__________ In this each module hides a difficult or changeable design decision from the other module. |
| A. | Information hiding criteria |
| B. | Conventional criteria |
| C. | Data abstraction criteria |
| D. | None of these |
| Answer» B. Conventional criteria | |
| 64. |
After the finalization of SRS, we may like to estimate |
| A. | Size |
| B. | Cost |
| C. | Development time |
| D. | All of the above. |
| Answer» E. | |
| 65. |
Reliability of software is dependent on number of errors |
| A. | removed |
| B. | remaining |
| C. | both (a) & (b) |
| D. | None of the above |
| Answer» C. both (a) & (b) | |
| 66. |
Statistically, the maximum percentage of errors belong to the following phase of SDLC |
| A. | Coding |
| B. | Design |
| C. | Specifications |
| D. | Installation and maintenance |
| Answer» D. Installation and maintenance | |
| 67. |
Software does not break or wear out like hardware. What is your opinion? |
| A. | True |
| B. | False |
| C. | Cannot say |
| D. | not fixed |
| Answer» B. False | |
| 68. |
McCall has developed a |
| A. | Quality model |
| B. | Process improvement model |
| C. | Requirement model |
| D. | Design model |
| Answer» B. Process improvement model | |
| 69. |
Which of the following model has a major disadvantage in terms of the coding phase of a software life cycle model? |
| A. | Spiral Model |
| B. | Waterfall Model |
| C. | Rad Model |
| D. | 4GT Model |
| Answer» E. | |
| 70. |
How many product quality factors have been proposed in McCall quality model? |
| A. | 2 |
| B. | 3 |
| C. | 11 |
| D. | 6 |
| Answer» E. | |
| 71. |
Which one is not a product quality factor of McCall quality model? |
| A. | Product revision |
| B. | Product operation |
| C. | Product specification |
| D. | Product transition |
| Answer» D. Product transition | |
| 72. |
In McCall quality model; product revision quality factor consist of |
| A. | Maintainability |
| B. | Flexibility |
| C. | Testability |
| D. | None of the above |
| Answer» E. | |
| 73. |
Which one is not a level in Boehm software quality model? |
| A. | Primary uses |
| B. | Intermediate constructs |
| C. | Primitive constructs |
| D. | Final constructs |
| Answer» E. | |
| 74. |
In what type of coupling, the complete data structure is passed from one module to another? |
| A. | Control Coupling |
| B. | Stamp Coupling |
| C. | External Coupling |
| D. | Content Coupling |
| Answer» C. External Coupling | |
| 75. |
How many stages are in COCOMO-II? |
| A. | 2 |
| B. | 3 |
| C. | 4 |
| D. | 5 |
| Answer» C. 4 | |
| 76. |
COCOMO-II estimation model is based on |
| A. | Complex approach |
| B. | Algorithm approach |
| C. | Bottom up approach |
| D. | Top down approach |
| Answer» C. Bottom up approach | |
| 77. |
If project is the enhancement of existing system, which model is best suited? |
| A. | Waterfall model |
| B. | Prototyping model |
| C. | Iterative enhancement model |
| D. | Spiral model |
| Answer» D. Spiral model | |
| 78. |
A fundamental Principal of software engineering is to design software products that minimize the intellectual distance between ----------- and solution. |
| A. | Method |
| B. | Process |
| C. | Product |
| D. | Problem |
| Answer» B. Process | |
| 79. |
A primary goal of software engineering is to improve the -------------and to increase the productivity and job satisfaction of software engineers. |
| A. | Quality of software product |
| B. | Satisfaction of product |
| C. | Flexibility |
| D. | None of these |
| Answer» B. Satisfaction of product | |
| 80. |
Which is not a software life cycle model? |
| A. | Waterfall model |
| B. | Spiral model |
| C. | Prototyping model |
| D. | Capability maturity model |
| Answer» E. | |
| 81. |
A ________ view shows the system hardware and how software components are distributed across the processors in the system. |
| A. | Physical |
| B. | Logical |
| C. | Process |
| D. | All |
| Answer» B. Logical | |
| 82. |
Milestones are used to |
| A. | Know the cost of the project |
| B. | know the status of the project |
| C. | Know user expectations |
| D. | none of the above |
| Answer» C. Know user expectations | |
| 83. |
A company is developing an advance version of their current software available in the market, what model approach would they prefer ? |
| A. | RAD |
| B. | Iterative Enhancement |
| C. | Both RAD & Iterative Enhancement |
| D. | Spiral |
| Answer» D. Spiral | |
| 84. |
A company is developing an advance version of their current software available in the market, what model approach would they prefer? |
| A. | RAD |
| B. | Iterative Enhancement |
| C. | Both RAD & Iterative Enhancement |
| D. | Spiral |
| Answer» D. Spiral | |
| 85. |
-----------------is concerned with how a systems tied together in order to achieve commongoal thus forming integration. |
| A. | Interaction |
| B. | Interdependence |
| C. | Integration |
| D. | Central Objective |
| Answer» D. Central Objective | |
| 86. |
The outcome of construction phased can be treated as: |
| A. | Product release |
| B. | Beta release |
| C. | Alpha release |
| D. | All of the above |
| Answer» C. Alpha release | |
| 87. |
__________ is the intellectual tool that allows us to deal with concepts apart from particular instances of those concepts. |
| A. | Module |
| B. | Abstraction |
| C. | Fan-in |
| D. | Fan-out |
| Answer» C. Fan-in | |
| 88. |
The extent to which different modules are dependent upon each other is called |
| A. | Coupling |
| B. | Cohesion |
| C. | Modularity |
| D. | Stability |
| Answer» B. Cohesion | |
| 89. |
A software engineer must design the modules with the goal of high cohesion and low coupling. |
| A. | True |
| B. | False |
| C. | all |
| D. | none |
| Answer» B. False | |
| 90. |
In Basic execution time model, failure intensity is given by |
| A. | ( )= 0(1- 2 / V0) |
| B. | ( )= 0(1- / V0) |
| C. | ( )= 0(1-V0/ 2) |
| D. | ( )= 0(1- V0/ ) |
| Answer» C. ( )= 0(1-V0/ 2) | |
| 91. |
As the reliability increases, failure intensity |
| A. | decreases |
| B. | increases |
| C. | no effect |
| D. | None of the above |
| Answer» B. increases | |
| 92. |
Regression testing is primarily related to: |
| A. | Functional testing |
| B. | Data flow testing |
| C. | Development testing |
| D. | Maintenance testing |
| Answer» E. | |
| 93. |
A node with indegree=0 and outdegree 0 is called |
| A. | Source node |
| B. | Destination node |
| C. | Transfer node |
| D. | None of the above |
| Answer» B. Destination node | |
| 94. |
The basic concepts of ER model are: |
| A. | Entity and relationship |
| B. | Relationships and keys |
| C. | Entity, effects and relationship |
| D. | Entity, relationship and attribute |
| Answer» E. | |
| 95. |
Basic execution time model was developed by |
| A. | Bev.Littlewood |
| B. | J.D.Musa |
| C. | R.Pressman |
| D. | Victor Baisili |
| Answer» E. | |
| 96. |
The number of clauses used in ISO 9001 are |
| A. | 15 |
| B. | 25 |
| C. | 20 |
| D. | 10 |
| Answer» D. 10 | |
| 97. |
ISO 9126 contains definitions of |
| A. | quality characteristics |
| B. | quality factors |
| C. | quality attributes |
| D. | All of the above |
| Answer» E. | |
| 98. |
Function count method was developed by |
| A. | B.Beizer |
| B. | B.Boehm |
| C. | M.halstead |
| D. | Alan Albrecht |
| Answer» E. | |
| 99. |
-------- interviews use of standardized question in either an open response or closeresponse format. |
| A. | Unstructured Interviews. |
| B. | Structured Interviews |
| C. | Questionnaires. |
| D. | Record inspection or view |
| Answer» C. Questionnaires. | |
| 100. |
A node with indegree 0 and out degree=0 is called |
| A. | Source node |
| B. | Predicate node |
| C. | Destination node |
| D. | None of the above |
| Answer» D. None of the above | |