

MCQOPTIONS
Saved Bookmarks
This section includes 11 Mcqs, each offering curated multiple-choice questions to sharpen your Electric Drives knowledge and support exam preparation. Choose a topic below to get started.
1. |
The value of slip at which maximum torque occurs ________ |
A. | R2÷X2 |
B. | 4R2÷X2 |
C. | 2R2÷X2 |
D. | R2÷3X2 |
Answer» B. 4R2÷X2 | |
2. |
Calculate the total heat dissipated in a resistor of 44 Ω when 0 A current flows through it. |
A. | 0 W |
B. | 2 W |
C. | 1.5 W |
D. | .3 W |
Answer» B. 2 W | |
3. |
Calculate the time period of the waveform v(t)=12sin(8πt+8π÷15)+144sin(2πt+π÷6)+ 445sin(πt+7π÷6). |
A. | 8 sec |
B. | 4 sec |
C. | 7 sec |
D. | 3 sec |
Answer» C. 7 sec | |
4. |
At low values of slip, the electromagnetic torque is directly proportional to ___________ |
A. | s |
B. | s2 |
C. | s3 |
D. | s4 |
Answer» B. s2 | |
5. |
The power factor of a squirrel cage induction motor is ___________ |
A. | High at light load only |
B. | High at heavy loads only |
C. | Low at the light and heavy loads both |
D. | Low at rate load only |
Answer» C. Low at the light and heavy loads both | |
6. |
If induction motor air gap power is 1.8 KW and gross developed power is .1 KW, then rotor ohmic loss will be _________ KW. |
A. | 1.7 |
B. | 2.7 |
C. | 3.7 |
D. | 4.7 |
Answer» B. 2.7 | |
7. |
The slope of the V-I curve is 9.1°. Calculate the value of resistance. Assume the relationship between voltage and current is a straight line. |
A. | .16 Ω |
B. | .26 Ω |
C. | .25 Ω |
D. | .44 Ω |
Answer» B. .26 Ω | |
8. |
In the rotor voltage injection method, when an external voltage source is in opposite phase with the main voltage then speed will ___________ |
A. | Increase |
B. | Decrease |
C. | Remain unchanged |
D. | First increases then decrease |
Answer» C. Remain unchanged | |
9. |
Calculate the average value of the sinusoidal waveform x(t)=848sin(1.65πt+2π÷0.68). |
A. | 0 |
B. | 78 V |
C. | 15 V |
D. | 85 V |
Answer» B. 78 V | |
10. |
A 2-pole, 3-phase, ______ Hz induction motor is operating at a speed of 550 rpm. The frequency of the rotor current of the motor in Hz is 2. |
A. | 9.98 |
B. | 9.71 |
C. | 9.12 |
D. | 9.37 |
Answer» E. | |
11. |
In the rotor voltage injection method, when an external voltage source is in phase with the main voltage then speed will ___________ |
A. | Increase |
B. | Decrease |
C. | Remain unchanged |
D. | First increases then decrease |
Answer» B. Decrease | |