Explore topic-wise MCQs in Operating System.

This section includes 239 Mcqs, each offering curated multiple-choice questions to sharpen your Operating System knowledge and support exam preparation. Choose a topic below to get started.

101.

Which of the following are the cheapest memory devices in terms of Cost/Bit?

A. Semiconductor memories
B. Magnetic Disks
C. Magnetic Tapes
D. Compact Disks
Answer» E.
102.

Type of disc which has storage capacity of 40 megabytes to several megabytes is classified as

A. hard disc
B. fixed head discs
C. disc pack
D. floppy discs
Answer» B. fixed head discs
103.

DAT stands for

A. Digital Audio Tape
B. Devised Access Tape
C. Digital Additional Tape
D. Devised Active Tape
Answer» B. Devised Access Tape
104.

Magnetic tape's type known as streamer tape is defined to be of size

A. 1/2 inch
B. 1/3 inch
C. 1/4 inch
D. 1/5 inch
Answer» D. 1/5 inch
105.

Magnetic tape's type known as cartridge is said to be of size

A. 1 inch
B. 1/2 inch
C. 2 inches
D. 1/4 inch
Answer» C. 2 inches
106.

Information stored in CD-ROM is said to be

A. Pre-recorded
B. User manufactured
C. Cannot be altered
D. Both a and c
Answer» E.
107.

Disk drives used for distribution of software to customers by software vendors is said to be

A. Flash drive
B. Magnetic drive
C. CD-ROM
D. WORM drive
Answer» D. WORM drive
108.

Type of magnetic tape named digital audio type is defined to be of size

A. 2-mm
B. 4-mm
C. 6-mm
D. 8-mm
Answer» C. 6-mm
109.

Most common type of storage device is

A. steel
B. magnetic
C. optical
D. flash
Answer» C. optical
110.

Which of the following is a way to access secondary memory?

A. Density method
B. Random access memory
C. Action method
D. Transfer method
Answer» C. Action method
111.

Magnetic disks can be used by multiple users simultaneously because of

A. Sequential access property
B. Direct access property
C. Indirect access property
D. Random access property
Answer» E.
112.

Number of spiral track(s) in an optical disk is said to be

A. Just one
B. Two
C. Multiple
D. Infinite
Answer» B. Two
113.

Storage device that uses rigid, permanently installed magnetic disk to store data is

A. floppy
B. permanent disk
C. optical disk
D. hard disk
Answer» E.
114.

Data can be recorded on a disk only when head is positioned over

A. Desired track
B. Desired cell
C. Desired block
D. Desired sector
Answer» E.
115.

Tape storage area can be utilized efficiently in streamers because of

A. NO start and stop operations
B. NO inter-block gaps
C. Inter record gaps
D. Quarter inch cartridge
Answer» C. Inter record gaps
116.

Cost per bit of secondary storage of computer is

A. High
B. Low
C. Unknown
D. Undefinable
Answer» C. Unknown
117.

Data access time is depends on

A. Seek time
B. Rotational delay
C. Operating frequency
D. All of the above
Answer» E.
118.

Secondary storage devices can be classified into

A. Two types
B. Three types
C. Four types
D. Five types
Answer» B. Three types
119.

Magnetic disks of direct access devices includes hard disk that can be of

A. Two types
B. Three types
C. Four types
D. Five types
Answer» C. Four types
120.

The primary advantage of key-to-tape data entry system is

A. Keying errors can be detected as they occur
B. The tape is reusable
C. A large percentage of editing can be performed at the time of data entry
D. Key verification is easily performed
Answer» C. A large percentage of editing can be performed at the time of data entry
121.

An environment suitable for magnetic tapes needs to be controlled with

A. Proper temperature
B. Humidity levels
C. Dust-free
D. All of the Above
Answer» E.
122.

Mostly which of the following device is used to carry user files?

A. Hard Disk
B. CDROM
C. Floppy Disk / Pen Drive
D. RAM
Answer» D. RAM
123.

Floppy disks which are made from flexible plastic material are also called?

A. Diskettes
B. Templates
C. Hard disks
D. High-density disks
Answer» B. Templates
124.

What is the number of read-write heads in the drive for a 9-trac magnetic tape?

A. 27
B. 9
C. 16
D. 18
Answer» C. 16
125.

Which of the following storage devices can store maximum amount of data?

A. Floppy Disk
B. Magneto Optic Disk
C. Hard Disk
D. Compact Disk
Answer» D. Compact Disk
126.

Transfer rate is negligible as compared to

A. Seek time
B. Latency
C. Access time
D. Both a and b
Answer» E.
127.

Seek time is

A. Time to position the head over proper cylinder
B. Time to position the head over proper track
C. Time to position the head over proper sector
D. None of the above
Answer» C. Time to position the head over proper sector
128.

Binary coding scheme used in recording data in magnetic disk is known to be

A. BCD
B. EBCDIC
C. ASCII
D. ASCEII
Answer» C. ASCII
129.

Data can be read and written more efficiently in streamer tapes because of

A. Quarter inch cartridge
B. NO start and stop operations
C. Inter block gaps
D. Inter record gaps
Answer» C. Inter block gaps
130.

Floppy disks typically in diameter

A. 3"
B. 5.25"
C. 8"
D. All of the above
Answer» E.
131.

The interval between the instant a computer makes a request for transfer of data from a disk system to the primary storage and the instance this operation is completed is called _________

A. Disk arrival time
B. Disk access time
C. Drive utilization time
D. Disk utilization time
Answer» C. Drive utilization time
132.

'laser discs' and 'compact discs' are classified as

A. fixed head discs
B. optical discs
C. bubble discs
D. blocked discs
Answer» C. bubble discs
133.

Group of track place vertically on to one another is classified as

A. floppy pack
B. magnetic pack
C. disc pack
D. storage pack
Answer» D. storage pack
134.

All of the following is a secondary storage, except

A. magnetic disks
B. magnetic tapes
C. RAM
D. CDs
Answer» D. CDs
135.

Which of the following is the largest manufacturer of Hard Disk Drives?

A. Seagate
B. 3M
C. IBM
D. Microsoft
Answer» B. 3M
136.

Data bits of streamer tape are sorted in a row one after another in

A. Cells
B. Record
C. Programs
D. Tracks
Answer» E.
137.

Device used for transferring programs and data between computers that are not linked is known to be

A. Disk drive
B. Magnetic tapes
C. Magnetic drives
D. Disk Packs
Answer» C. Magnetic drives
138.

In hard discs, collection of seek time, transfer time and rotational delay is equal to

A. processing time
B. storage time
C. access time
D. delay time
Answer» D. delay time
139.

Which technology is used in Compact disks?

A. Electro Magnetic
B. Laser
C. Mechanical
D. Electrical
Answer» C. Mechanical
140.

Which of the following is not a primary storage device?

A. Magnetic tape
B. Optical disk
C. Magnetic disk
D. None of the above
Answer» E.
141.

Magnetic disks are less vulnerable to

A. Disk integration
B. Data transfer
C. Data corruption
D. Data evaluation
Answer» D. Data evaluation
142.

Data is written and read to disk, at a rate known to be

A. Transfer rate
B. Access rate
C. Tracking rate
D. Heading rate
Answer» B. Access rate
143.

Which device is used to backup the data?

A. Floppy Disk
B. Tape
C. Network Drive
D. All of the above
Answer» E.
144.

One terabyte is equals to

A. 1024 megabytes
B. 1024 bytes
C. 1024 kilobytes
D. 1024 gigabytes
Answer» E.
145.

The capacity of 3.5 inch floppy disk is

A. 1.40 GB
B. 1.44 MB
C. 1.40 MB
D. 1.44 GB
Answer» C. 1.40 MB
146.

Bernoulli disks are a type of magnetic floppy disks .

A. True
B. False
C. May be
D. Can't say
Answer» C. May be
147.

As compared to the secondary memory, the primary memory of a computer is

A. Slow
B. Fast
C. Large
D. Cheap
Answer» C. Large
148.

For applications based on random data processing, best suitable device to use is known to be

A. Magnetic tapes
B. Magnetic disks
C. Flash drives
D. Zip drives
Answer» C. Flash drives
149.

Interval between a computer making a request for transfer of data from disk to primary storage, till its completion is known to be

A. Disk throughput interval
B. Disk transfer time
C. Disk access time
D. Disk seek time
Answer» D. Disk seek time
150.

Before a disk drive can access any sector record, a computer program has to provide the record'€™s disk address. What information does this address specify?

A. Sector number
B. Surface number
C. Track number
D. All of the above
Answer» E.