Explore topic-wise MCQs in Irrigation Engineering.

This section includes 188 Mcqs, each offering curated multiple-choice questions to sharpen your Irrigation Engineering knowledge and support exam preparation. Choose a topic below to get started.

151.

The highest concrete gravity dam of India which is also the 2nd highest such dam of the world is _______________

A. Indira Sagar Dam
B. Cheruthoni Dam
C. Bhakra Nangal dam
D. Tehri Dam
Answer» D. Tehri Dam
152.

What is the value of Barlow’s runoff percentage (K) for hills and plains with little cultivation?

A. 10
B. 15
C. 20
D. 25
Answer» E.
153.

Hoop’s reinforcement is provided in cement concrete pressure pipes in order to counteract the _________

A. water hammer pressure
B. internal hammer pressure
C. stresses caused by the external backfills
D. both water hammer pressure and internal hammer pressure
Answer» E.
154.

What is the name given to the straight reaches between two successive curves in a meander?

A. Cut-Off
B. Meander Belt
C. Crossings
D. Bend
Answer» D. Bend
155.

The complete formation of which curve leads to the formation of a meander?

A. Horizontal Curve
B. S-Curve
C. Vertical Curve
D. Circular Curve
Answer» C. Vertical Curve
156.

What was the initial belief for the meandering process?

A. Velocity of the Flow
B. Excessive Bed Slope
C. Discharge
D. Type of Sediment Load Carried
Answer» C. Discharge
157.

How many numbers of variables govern the meandering process?

A. 2
B. 3
C. 5
D. 4
Answer» E.
158.

Multiple arch dam is an example of _______________

A. Arch dam
B. Shell-arch dams
C. Buttress dams
D. Coffer dam
Answer» D. Coffer dam
159.

Earthen dams are _________________

A. rigid dams
B. non-rigid dams
C. overflow dams
D. diversion dams
Answer» C. overflow dams
160.

A _________________ dam is generally called as a weir or barrage.

A. storage dam
B. detention dam
C. diversion dam
D. rigid dam
Answer» D. rigid dam
161.

What is the example of Himalayan Rivers?

A. Cauvery
B. Godavari
C. Tapti
D. Ganga
Answer» E.
162.

Which stage of the river is formed by erosion?

A. Aggrading
B. Tidal Rivers
C. Boulder River Stage
D. Rocky River Stage
Answer» E.
163.

Which type of river tends to develop bends?

A. Alluvial River
B. Flashy River
C. Virgin River
D. Himalayan River
Answer» B. Flashy River
164.

The numerous problems faced by the river is due to sediment carried by it.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
165.

Which of the following types of pressure conduits is preferably used for large heads?

A. PCC pipes
B. Cast iron pipes
C. Pre-stressed concrete pipes
D. Asbestos pipes
Answer» D. Asbestos pipes
166.

Which foundation is not fit for concrete gravity dam or for rock-fill dams?

A. Solid rock foundation
B. Gravel foundation
C. Silt and fine sand foundation
D. Clay foundation
Answer» E.
167.

The prominent modern dam which has changed its name several times is _____________

A. Nagarjuna dam
B. Hoover dam
C. Bhakra dam
D. Idukki dam
Answer» C. Bhakra dam
168.

Into how many categories the river training works are classified?

A. 2
B. 4
C. 3
D. 5
Answer» D. 5
169.

The valley storage reduces the effective storage capacity of a reservoir.

A. True
B. False
C. May be True or False
D. Can't say
Answer» B. False
170.

What is the most important physical characteristic of a reservoir?

A. Storage capacity
B. Annual Yield
C. Average yield
D. Reservoir water level
Answer» B. Annual Yield
171.

According to the Hydraulic design, the dams are classified as _________

A. diversion and detention Dams
B. storage and diversion dams
C. overflow and non-overflow dam
D. arch and buttress dam
Answer» D. arch and buttress dam
172.

Which category of river training work helps in navigation of the channels?

A. Mean Water Training
B. Training for Depth
C. Training for Discharge
D. Training for Sediment
Answer» C. Training for Discharge
173.

The famous Roosevelt dam in USA is of the type __________________

A. Rock-fill dam
B. Solid Masonry Gravity Dam
C. RCC arch bridge
D. A hollow masonry gravity dam
Answer» C. RCC arch bridge
174.

Which head loss formula is also applicable to turbulent flow in pressure conduits?

A. Darch-Weisbach equation
B. Manning’s formula
C. Hazen-Williams formula
D. Both Darch-Weisbach and Manning’s formula
Answer» C. Hazen-Williams formula
175.

Which of the following dam is partly earthen and partly rockfill?

A. Tehri dam
B. Koyna dam
C. Sardar Sarovar dam
D. Bhakra dam
Answer» B. Koyna dam
176.

What is the source of water for the Non-Himalayan Rivers?

A. Summer Season
B. Rainy Season
C. Winter Season
D. Himalayan Rivers
Answer» D. Himalayan Rivers
177.

Which of the following measure does not prevent or reduce the intensity of the earthquake?

A. Filling the reservoir up to a limited safe level
B. Draining out water from weaker adjoining rocks
C. Active exploration of the dam site for the absence of inactive faults before selecting the same
D. Increasing the pore pressure
Answer» E.
178.

In which of the following method, the catchments were categorized as good, bad and average catchments to account for the general characteristics of the catchment?

A. Binnie’s percentages
B. Strange’s tables
C. Barlow’s tables
D. Inglis formula
Answer» C. Barlow’s tables
179.

What is the approximate value of Ryve’s coefficient for combined catchment having limited areas near hills?

A. 6.5
B. 8.5
C. 10.2
D. Up to 40
Answer» D. Up to 40
180.

Calculate peak discharge for a combined catchment of a tank forming a constituent unit of a group with the following given data –Combined catchment = 26 sq. kmIntercepted catchment = 20 sq. kmRyve’s coefficient for combined catchment = 9.0Ryve’s coefficient intercepted = 1.8

A. 66 cumecs
B. 59 cumecs
C. 50 cumecs
D. 69 cumecs
Answer» B. 59 cumecs
181.

Pipe sluices are generally not adopted in tank bunds where the depth below F.T.L exceeds ____________

A. 1.5 m
B. 1 m
C. 2.5 m
D. 5 m
Answer» D. 5 m
182.

What will the discharging capacity of a masonry waste weir of 55 m length and 1.5 m width provided in an earthen bund for passing a flood with 1.2 m water depth over its crest?

A. 120 cumecs
B. 254 cumecs
C. 59.4 cumecs
D. 65.8 cumecs
Answer» B. 254 cumecs
183.

The discharge through the sluice of a small irrigation tank is usually controlled by _______________

A. dam stone
B. plug
C. special balanced valves
D. shutters
Answer» C. special balanced valves
184.

The rivers in hills are further classified into how many groups?

A. 4
B. 2
C. 3
D. 6
Answer» C. 3
185.

What type of groyne does the diagram represent?

A. Sedimenting Groyne
B. Attracting Groyne
C. Repelling Groyne
D. Deflecting Groyne
Answer» E.
186.

Depending on the topography of the river basin, into how many classifications the river reaches are divided?

A. 3
B. 4
C. 5
D. 1
Answer» B. 4
187.

What type of structure does the diagram represent?

A. Cut-Off
B. Meander
C. Bends
D. Straight Reach
Answer» E.
188.

What type of river does the diagram represent?

A. Braided River
B. Aggrading Type River
C. Degrading type River
D. Stable Type River
Answer» B. Aggrading Type River