14 + Mcqs in Press Selection in Pulp Paper Page 1 McqOptions

Explore topic-wise MCQs in Pulp Paper.

The press felt normally runs over the paper web going through a press section. It’s designed to adsorb H2O squeezed out of the sheet and to support the sheet throughout the presses.

A _ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _ provide additional volume and a path for water transfer from the sheet through the press nip.

A _________ is a pair of squeeze or wringer rolls designed to remove water mechanically and smooth and compress the sheet.

THE_PRESS_FELT_NORMALLY_RUNS_OVER_THE_PAPER_WEB_GOING_THROUGH_A_PRESS_SECTION._IT‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_DESIGNED_TO_ADSORB_H₂O_SQUEEZED_OUT_OF_THE_SHEET_AND_TO_SUPPORT_THE_SHEET_THROUGHOUT_THE_PRESSES.?$#

A _ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _ provide additional volume and a path for water transfer from the sheet through the press nip?

In a _________ 2 smooth rolls are utilized and the capacity to remove water depends on the void volume of the press felt(s) to receive the water.

Allowing both sides of the web to be pressed against a solid roll at different times. This process comes under which category?

A design that gives the ability to have high machine speeds with operation stability and low vibration. This process comes under which category?

Shoe presses or other special presses to promote good fiber bonding and decrement in web moisture contents.

_________ in the first press because of the large amount of water being removed. This avoids sheet crushing and allows more water to be removed.

The use of a pickup felt while the web is still in contact with the forming material so that there is no unsupported web during the transfer. An open draw is delayed until several press nips have been passed. An unsupported web is called _________

A _________ is a pair of squeeze or wringer rolls designed to remove water mechanically and smooth and compress the sheet.

Explore topic-wise MCQs in Pulp Paper.

The press felt normally runs over the paper web going through a press section. It’s designed to adsorb H2O squeezed out of the sheet and to support the sheet throughout the presses.

A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip.

A _________ is a pair of squeeze or wringer rolls designed to remove water mechanically and smooth and compress the sheet.

THE_PRESS_FELT_NORMALLY_RUNS_OVER_THE_PAPER_WEB_GOING_THROUGH_A_PRESS_SECTION._IT‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_DESIGNED_TO_ADSORB_H2O_SQUEEZED_OUT_OF_THE_SHEET_AND_TO_SUPPORT_THE_SHEET_THROUGHOUT_THE_PRESSES.?$#

A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip?

In a _________ 2 smooth rolls are utilized and the capacity to remove water depends on the void volume of the press felt(s) to receive the water.

Allowing both sides of the web to be pressed against a solid roll at different times. This process comes under which category?

A design that gives the ability to have high machine speeds with operation stability and low vibration. This process comes under which category?

Shoe presses or other special presses to promote good fiber bonding and decrement in web moisture contents.

_________ in the first press because of the large amount of water being removed. This avoids sheet crushing and allows more water to be removed.

The use of a pickup felt while the web is still in contact with the forming material so that there is no unsupported web during the transfer. An open draw is delayed until several press nips have been passed. An unsupported web is called _________

A _________ is a pair of squeeze or wringer rolls designed to remove water mechanically and smooth and compress the sheet.

A _ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _ provide additional volume and a path for water transfer from the sheet through the press nip.

THE_PRESS_FELT_NORMALLY_RUNS_OVER_THE_PAPER_WEB_GOING_THROUGH_A_PRESS_SECTION._IT‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_DESIGNED_TO_ADSORB_H₂O_SQUEEZED_OUT_OF_THE_SHEET_AND_TO_SUPPORT_THE_SHEET_THROUGHOUT_THE_PRESSES.?$#

A _ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _ provide additional volume and a path for water transfer from the sheet through the press nip?