A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip?

A _________ roll press uses helical grooves cut into the bottom press

1.	A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip?
A.	Shoe
B.	Felt
C.	Groove
D.	Kennedy
Answer» D. Kennedy

Discussion

No Comment Found

Related MCQs

A reverse press is mounted in a way that the paper web goes through in a direction that’s opposite to its original travel direction so that both sides on the web, therefore providing smoothing action on the opposite side of the paper web. This can also be accomplished by using _________ smooth press rolls.
The press felt normally runs over the paper web going through a press section. It’s designed to adsorb H2O squeezed out of the sheet and to support the sheet throughout the presses.
A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip.
A _________ is a pair of squeeze or wringer rolls designed to remove water mechanically and smooth and compress the sheet.
THE_PRESS_FELT_NORMALLY_RUNS_OVER_THE_PAPER_WEB_GOING_THROUGH_A_PRESS_SECTION._IT‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_DESIGNED_TO_ADSORB_H<SUB>2</SUB>O_SQUEEZED_OUT_OF_THE_SHEET_AND_TO_SUPPORT_THE_SHEET_THROUGHOUT_THE_PRESSES.?$#
A reverse press is mounted in a way that the paper web goes through in a direction that‚Äö√Ñ√∂‚àö√ë‚àö¬•s opposite to its original travel direction so that both sides on the web, therefore providing smoothing action on the opposite side of the paper web. This can also be accomplished by using _________ smooth press rolls.$#
A _________ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _________ provide additional volume and a path for water transfer from the sheet through the press nip?
In a _________ 2 smooth rolls are utilized and the capacity to remove water depends on the void volume of the press felt(s) to receive the water.
Allowing both sides of the web to be pressed against a solid roll at different times. This process comes under which category?
A design that gives the ability to have high machine speeds with operation stability and low vibration. This process comes under which category?

A _ roll press uses helical grooves cut into the bottom press roll that is in contact with the pressure felt. These _ provide additional volume and a path for water transfer from the sheet through the press nip?

Discussion

No Comment Found

Related MCQs

Reply to Comment