

MCQOPTIONS
Saved Bookmarks
This section includes 26 Mcqs, each offering curated multiple-choice questions to sharpen your Electrical Machines knowledge and support exam preparation. Choose a topic below to get started.
1. |
In a synchronous machine, hunting is predominantly damped by __________ |
A. | mechanical losses in the rotor |
B. | iron losses in rotor |
C. | copper losses of stator |
D. | copper losses of rotor |
Answer» E. | |
2. |
For the effective electromechanical energy conversion in the device, the developed torque depends upon __________ |
A. | stator field and torque angle |
B. | stator field and rotor field |
C. | stator field and rotor field and the torque angle |
D. | stator field only |
Answer» D. stator field only | |
3. |
The phasor addition of stator and rotor mmfs in a cylindrical rotor synchronous machine, is possible because __________ |
A. | mmfs are rotating in opposite direction |
B. | mmfs are rotating in same direction at different speeds |
C. | mmfs are stationary with respect to each other |
D. | one mmf is stationary and the other mmf is rotating |
Answer» D. one mmf is stationary and the other mmf is rotating | |
4. |
A synchronous machine which is synchronized with an infinite bus. If it is desired to obtain a condition when the machine delivers the real power to the IBB without changing the field excitation, then __________ |
A. | reactive power will be consumed by the machine |
B. | reactive power will be delivered by the machine |
C. | no reactive power flow will take place |
D. | none of the mentioned |
Answer» B. reactive power will be delivered by the machine | |
5. |
A synchronous generator is running over excited with a Ef=1.40pu. This machine, with a synchronous reactance of 1.2pu, is delivering a synchronous power of 0.5pu to the bus. If the prime-mover torque is increased by 1%, by how much will the reactive power, Q change? |
A. | -0.475 % |
B. | 0.475% |
C. | 4.75% |
D. | -4.75% |
Answer» B. 0.475% | |
6. |
A synchronous generator is operating with a Ef=1.40pu. This machine having Xs of 1.2pu, is delivering a synchronous power of 0.5pu to the bus. If the prime-mover torque is increased by 1%, by how much will the synchronous power P change? |
A. | 1% |
B. | 10% |
C. | -1% |
D. | 4% |
Answer» B. 10% | |
7. |
Maximum power in cylinder rotor alternator occurs at load angle of __________ |
A. | 90 degree |
B. | 45 degree |
C. | less than 90 degree |
D. | 180 degree |
Answer» B. 45 degree | |
8. |
If the synchronous machine is connected to an infinite bus of constant voltage Vt, through a transformed, a transmission line of reactance ‘X’. Then power for a cylindrical machine is? |
A. | P = (Ef*Vt sinδ)/(Xs + X) |
B. | P = (Ef*Ef sin2δ)/(Xs + X) |
C. | P = (Ef*Vt sinδ)/(Xs – X) |
D. | P = (Vt*Vt sinδ)/(Xs + X) |
Answer» B. P = (Ef*Ef sin2δ)/(Xs + X) | |
9. |
A cylindrical rotor alternator can also run as reluctance motor. |
A. | True |
B. | False |
Answer» C. | |
10. |
A 3 phase 400V cylindrical rotor is running at 1500rpm. Suddenly the field excitation zero. Then the net reluctance power is? |
A. | 0 |
B. | sin 2d |
C. | cos d |
D. | cos 2d |
Answer» B. sin 2d | |
11. |
A 3 phase 400V salient pole alternator is running at no-load. Suddenly the excitation is removed then the net power in the machine is proportional to _____________ |
A. | sin 2d |
B. | sin d |
C. | cos 2d |
D. | 0 |
Answer» B. sin d | |
12. |
For a 3 phase 400V alternator supplying a load of 0.8 pf lagging at an armature current of 1.1pu. The power delivered to load is? |
A. | 0.88pu |
B. | 0.8pu |
C. | 0.66pu |
D. | 1.375pu |
Answer» D. 1.375pu | |
13. |
For a 3 phase 400V alternator having 0.5pu of synchronous reactance and its excitation voltage of 1.2pu and Vt of 1pu. Then the power delivered to the infinite bus is? |
A. | 2.4pu |
B. | 4.8pu |
C. | 1.44pu |
D. | 1pu |
Answer» B. 4.8pu | |
14. |
MAXIMUM_POWER_IN_CYLINDER_ROTOR_ALTERNATOR_OCCURS_AT_LOAD_ANGLE_OF?$ |
A. | 90 degree |
B. | 45 degree |
C. | less than 90 degree |
D. | 180 degree |
Answer» B. 45 degree | |
15. |
A synchronous generator is running over excited with a Ef=1.40pu. This machine, with a synchronous reactance of 1.2pu, is delivering a synchronous power of 0.5pu to the bus. If the prime-mover torque is increased by 1%, by how much will the reactive power, Q change?$ |
A. | -0.475 % |
B. | 0.475% |
C. | 4.75% |
D. | -4.75% |
Answer» B. 0.475% | |
16. |
A_synchronous_generator_is_operating_with_a_Ef=1.40pu._This_machine_having_Xs_of_1.2pu,_is_delivering_a_synchronous_power_of_0.5pu_to_the_bus._If_the_prime-mover_torque_is_increased_by_1%,_by_how_much_will_the_synchronous_power_P_change?$ |
A. | 1% |
B. | 10% |
C. | -1% |
D. | 4% |
Answer» B. 10% | |
17. |
In a synchronous machine, hunting is predominantly damped by |
A. | mechanical losses in the rotor |
B. | iron losses in rotor |
C. | copper losses of stator |
D. | copper losses of rotor |
Answer» E. | |
18. |
For the effective electromechanical energy conversion in the device, the developed torque depends upon |
A. | stator field and torque angle |
B. | stator field and rotor field |
C. | stator field and rotor field and the torque angle |
D. | stator field only |
Answer» D. stator field only | |
19. |
The phasor addition of stator and rotor mmfs in a cylindrical rotor synchronous machine, is possible because |
A. | mmfs are rotating in opposite direction |
B. | mmfs are rotating in same direction at different speeds |
C. | mmfs are stationary with respect to each other |
D. | one mmf is stationary and the other mmf is rotating |
Answer» D. one mmf is stationary and the other mmf is rotating | |
20. |
A synchronous machine which is synchronized with an infinite bus. If it is desired to obtain a condition when the machine delivers the real power to the IBB without changing the field excitation, then |
A. | reactive power will be consumed by the machine |
B. | reactive power will be delivered by the machine |
C. | no reactive power flow will take place |
D. | none of the mentioned |
Answer» B. reactive power will be delivered by the machine | |
21. |
If the synchronous machine is connected to an infinite bus of constant voltage Vt, through a transformed, a transmission line of reactance ‘X’. then power for a cylindrical machine i?# |
A. | P = (Ef*Vt sinδ)/(Xs + X) |
B. | P = (Ef*Ef sin2δ)/(Xs + X) |
C. | P = (Ef*Vt sinδ)/(Xs – X) |
D. | P = (Vt*Vt sinδ)/(Xs + X) |
Answer» B. P = (Ef*Ef sin2‚âà√≠¬¨‚Ä¢)/(Xs + X) | |
22. |
A cylindrical rotor alternator can also run as reluctance motor |
A. | True |
B. | False |
Answer» C. | |
23. |
A 3 phase 400V cylindrical rotor is running at 1500rpm. Suddenly the field excitation zero. Then the net reluctance power is |
A. | 0 |
B. | sin 2d |
C. | cos d |
D. | cos 2d |
Answer» B. sin 2d | |
24. |
A 3 phase 400V salient pole alternator is running at no-load. Suddenly the excitation is removed then the net power in the machine is proportional to |
A. | sin 2d |
B. | sin d |
C. | cos 2d |
D. | 0 |
Answer» B. sin d | |
25. |
For a 3 phase 400V alternator supplying a load of 0.8 pf lagging at an armature current of 1.1pu. The power delivered to load is |
A. | 0.88pu |
B. | 0.8pu |
C. | 0.66pu |
D. | 1.375pu |
Answer» D. 1.375pu | |
26. |
For a 3 phase 400V alternator having 0.5pu of synchronous reactance and its excitation voltage of 1.2pu and Vt of 1pu. Then the power delivered to the infinite bus is |
A. | 2.4pu |
B. | 4.8pu |
C. | 1.44pu |
D. | 1pu |
Answer» B. 4.8pu | |