Explore topic-wise MCQs in Chemical Engineering.

This section includes 23 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

1.

Which of the following processes in oil refinery does not employ \'cracking\' ?

A. Visbreaking
B. Coking
C. None of these
D. Pyrolysis
Answer» D. Pyrolysis
2.

The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively

A. 1 and 200
B. 10 and 120
C. 10 and 300
D. 50 and 250
Answer» B. 10 and 120
3.

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C ?

A. Naphtha
B. Petrol
C. Kerosene
D. Heavy fuel oil
Answer» E.
4.

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts.

A. steam reforming
B. distillation
C. desulphurisation
D. none of these
Answer» C. desulphurisation
5.

Flash point of diesel/kerosene (>50°C) is determined by the

A. Abel apparatus
B. Pensky-Martens apparatus
C. Saybolt chromometer
D. none of these
Answer» C. Saybolt chromometer
6.

Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatisation by liquid SO 2 extraction (Edeleanu process), its smoke point may become __________ mm.

A. 5
B. 10
C. 25
D. 100
Answer» D. 100
7.

Which of the following has the maximum °API gravity of all?

A. Diesel
B. Kerosene
C. Petrol
D. Furnace oil
Answer» D. Furnace oil
8.

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene.

A. smoke point
B. paraffins
C. aromatics
D. naphthenes
Answer» D. naphthenes
9.

Aniline point of high speed diesel may be about __________ °C.

A. 35
B. 70
C. 105
D. 150
Answer» C. 105
10.

Which of the following has the minimum °API gravity of all?

A. Diesel
B. Kerosene
C. Petrol
D. Furnace oil
Answer» E.
11.

A fuel oil consists of 4 fractions A, B, C and D. Their molar compositions and vapour pressures are given below : The vapour pressure of the fuel oil will be __________ mm Hg.

A. 736
B. 727.5
C. 512
D. 767.8
Answer» B. 727.5
12.

Concentration of H 2 SO 4 catalyst in alkyla-tion is kept between 90-98%, because H 2 SO 4 having concentration

A. less than 90% promotes polymerisation.
B. more than 98% promotes cracking.
C. both (a) and (b).
D. neither (a) nor (b).
Answer» D. neither (a) nor (b).
13.

Octane number of n -heptane is assumed to be

A. 100
B. 0
C. 70
D. ?
Answer» C. 70
14.

C n H 2n is the general formula for

A. olefins
B. naphthenes
C. both (a) and (b)
D. neither (a) nor (b)
Answer» D. neither (a) nor (b)
15.

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm 2 .

A. 1.5
B. 3
C. 6
D. 12
Answer» C. 6
16.

95% (by volume) of LPG at 760 mm Hg pressure will evaporate at __________ °C.

A. 2
B. -40
C. 30
D. 55
Answer» B. -40
17.

Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is

A. 1
B. 2
C. 3
D. 4
Answer» E.
18.

Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C.

A. 50
B. 70
C. 90
D. 140
Answer» D. 140
19.

The pressure (kg/cm 2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively

A. 10 and 120
B. 1 and 200
C. 50 and 250
D. 10 and 300
Answer» B. 1 and 200
20.

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm 2 is maintained during cracking mainly to

A. increase the yield of light distillates.
B. suppress coke formation.
C. enhance the octane number of gasoline.
D. reduce gum content in gasoline.
Answer» C. enhance the octane number of gasoline.
21.

Flash point of motor gasoline may be around __________ °C.

A. 10
B. 45
C. 100
D. 150
Answer» C. 100
22.

For gasoline, the flash point (<50°C) is determined by the

A. Abel apparatus.
B. Pensky-Marten's apparatus.
C. Saybolt chromometer.
D. none of these.
Answer» B. Pensky-Marten's apparatus.
23.

Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API) ?

A. Diesel
B. Gasoline
C. Atmospheric gas oil
D. Vacuum gas oil
Answer» C. Atmospheric gas oil