Explore topic-wise MCQs in Chemical Engineering.

This section includes 281 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

151.

_Carbon percentage (by weight) in crude petroleum may be about$?

A. 65
B. 75
C. 85
D. 95
Answer» D. 95
152.

_Lane and Garton classification of petroleum is based on its$?

A. Composition
B. Specific gravity
C. Optical properties
D. Viscosity
Answer» C. Optical properties
153.

_Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm² .$?

A. 1.5
B. 3
C. 6
D. 12
Answer» C. 6
154.

_Crude oil produced by Indian oil fields are predominantly __________ in nature.$?

A. Paraffinic
B. Naphthenic
C. Asphaltic
D. Mixed base
Answer» D. Mixed base
155.

_95% (by volume) of LPG at 760 mm Hg pressure will evaporate at __________ °C.$?

A. 2
B. -40
C. 30
D. 55
Answer» B. -40
156.

_Which of the following fractions of petroleum contains maximum sulphur?$?

A. Diesel
B. Gasoline
C. Naphtha
D. Atmospheric residue
Answer» E.
157.

_In petroleum refining, the process used for conversion of hydrocarbons to aromatics is$?

A. Catalytic cracking
B. Catalytic reforming
C. Hydrotreating
D. Alkylation
Answer» C. Hydrotreating
158.

_Doctor's solution used for sweetening of petroleum products is$?

A. Sodium plumbite
B. Sodium sulphite
C. Sodium thiosulphate
D. Lead sulphate
Answer» B. Sodium sulphite
159.

_Mercaptans is represented as (where R and R' are alkyl groups)$?

A. R-COOH
B. R-S-H
C. R-S-R
D. R-S-R'
Answer» C. R-S-R
160.

_The pressure (kg/cm² ) and temperature (°C) maintained in electrical desalters for crude oil are respectively$?

A. 10 and 120
B. 1 and 200
C. 50 and 250
D. 10 and 300
Answer» C. 50 and 250
161.

_Hydrocracking employs$?

A. High pressure & temperature
B. Low pressure & temperature
C. High pressure and low temperature
D. High temperature and low pressure
Answer» B. Low pressure & temperature
162.

_Pressure & temperature maintained in catalytic cracking is about$?

A. 2atm & 500°C
B. 10atm & 500°C
C. 30atm & 200°C
D. 50atm. & 750°C
Answer» B. 10atm & 500¬¨‚àûC
163.

_Which of the following has the lowest cetane number?$?

A. Aromatics
B. I-paraffins
C. Naphthene
D. Olefins
Answer» B. I-paraffins
164.

___________ test is done to find out the softening point of bitumen.$?

A. Impact
B. Ball and ring
C. Flame
D. Viscosity
Answer» C. Flame
165.

_Main boring diameter for petroleum well is 20-30 cms in diameter, while the depth of the oil well may be about __________ kms.$?

A. 0.1 to 0.5
B. 1.5 to 4.5
C. 7.5 to 12.5
D. 15-20
Answer» C. 7.5 to 12.5
166.

_Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm² is maintained during cracking mainly to$?

A. Increase the yield of light distillates
B. Suppress coke formation
C. Enhance the octane number of gasoline
D. Reduce gum content in gasoline
Answer» C. Enhance the octane number of gasoline
167.

_Stabilisation of gasoline (petrol) means$?

A. Removal of dissolved gases from it
B. Increasing its oxidation stability
C. Improving its lead susceptibility
D. Increasing its vapour pressure
Answer» B. Increasing its oxidation stability
168.

_In case of liquid petrofuels, momentary combustion is observed at its$?

A. Flash point
B. Preheating temperature corresponding to viscosity of 25 centistokes
C. Flame temperature
D. Fire point
Answer» B. Preheating temperature corresponding to viscosity of 25 centistokes
169.

_Petroleum deposits are detected by the.$?

A. Oil seepage at the surface of the earth
B. Measuremet of density, elasticity and magnetic & electric properties of the rock in the crust of the earth
C. Age & nature of rocks inside the crust of the earth
D. All of the above
Answer» E.
170.

_Which of the following does not require preheating during storage in the storage tank as well as during atomisation through burners?$?

A. PCM
B. Tar
C. Light diesel oil
D. Low viscosity furnace oil
Answer» D. Low viscosity furnace oil
171.

_Sour crude means the __________ bearing crude.$?

A. Asphalt
B. Sulphur compounds
C. Wax
D. Nitrogen compounds
Answer» C. Wax
172.

_Catalyst used in alkylation process is$?

A. Sulphuric acid
B. Nickel
C. Silica gel
D. Alumina
Answer» B. Nickel
173.

_Pyrolysis of kerosene or natural gasoline is done to produce mainly the$?

A. Olefins and aromatics
B. Lighter paraffins
C. Stabilised gasoline
D. Diesel
Answer» B. Lighter paraffins
174.

_Absolute vapor pressure of petrofuels is found by Reid bomb which is heated in water bath to 100°F. In Reid apparatus, the ratio of the volume of air chamber to that of the liquid fuel chamber is$?

A. 1
B. 2
C. 3
D. 4
Answer» E.
175.

_Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely mis-cible. It means that the aniline point of the diesel is __________ the room temperature.$?

A. More than
B. Less than
C. Same as
D. Either more or less; depends on the room temperature
Answer» D. Either more or less; depends on the room temperature
176.

_Which is the most desirable component of a good quality kerosene?$?

A. I-paraffins
B. Aromatics
C. N-paraffins
D. Naphthenes
Answer» D. Naphthenes
177.

_Bottom product of atmospheric pressure crude oil distillation column is termed as$?

A. Reduced crude
B. Heavy ends
C. Asphalt
D. Residuum
Answer» B. Heavy ends
178.

_Antioxidants are added in petrol to$?

A. Impart colour to it, for easy identification
B. Minimise the gum formation
C. Prevent icing of the carburettor
D. Prevent the lead build up in engines
Answer» C. Prevent icing of the carburettor
179.

_The terminology used for the bottom most product from the vacuum crude distillation unit is$?

A. Residual crude
B. Residuum
C. Reduced crude
D. Petrolatum
Answer» C. Reduced crude
180.

_Maximum use of petroleum coke is in$?

A. Adsorption refining operation
B. Fuel gas manufacture
C. Carbon electrode manufacture
D. Iron ore reduction
Answer» D. Iron ore reduction
181.

_Specific gravity of a petroleum product gives an indication of its$?

A. Degree of refinement
B. Hydrocarbon content type (aromatic or paraffinic)
C. Ease of atomisation
D. Sulphur content
Answer» C. Ease of atomisation
182.

_Which of the following is the most suitable feed for platforming process (reforming)?$?

A. Olefinic hydrocarbon
B. Naphtha
C. Fuel oil
D. Atmospheric residue
Answer» B. Naphtha
183.

_Feedstock for the production of biodiesel is$?

A. Herbal plants
B. Used vegetable oils
C. LSHS
D. Bagasse
Answer» C. LSHS
184.

_High aniline point of a petrofuel (say diesel) indicates that$?

A. It is highly aromatic in nature
B. It is highly paraffinic in nature
C. It has a very low diesel index
D. Its ignition quality is very poor
Answer» C. It has a very low diesel index
185.

_Diesel index is defined as$?

A. (°API) x (Aniline Point, °F)/100
B. (°API) x (Aniline Point, °C)/100
C. (°API) x (100)/Aniline Point, °F
D. (°API) x (100)/Aniline Point, °C
Answer» B. (¬¨‚àûAPI) x (Aniline Point, ¬¨‚àûC)/100
186.

_Crude oil is transported inland from oil field to refineries, mainly by the$?

A. Road tankers
B. Rail tankers
C. Underground pipelines
D. None of these
Answer» D. None of these
187.

___________ determination is not a very significant and important test for gasoline.$?

A. Gum & sulphur content
B. Viscosity
C. Octane number
D. Reid vapor pressure
Answer» C. Octane number
188.

_Paraffin base crude oil as compared to asphalt base crude gives$?

A. Higher yield of straight run gasoline
B. Higher octane number gasoline
C. Lower viscosity index lube oil
D. Poorer yield of lube oil
Answer» B. Higher octane number gasoline
189.

_Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with$?

A. Methyl alcohol
B. Ethyl alcohol
C. Methane
D. Ethane
Answer» B. Ethyl alcohol
190.

_Flash point of motor gasoline may be around __________ °C.$?

A. 10
B. 45
C. 100
D. 150
Answer» C. 100
191.

_Flash point of diesel/kerosene (>50°C) is determined by the$?

A. Abel apparatus
B. Pensky-Martens apparatus
C. Saybolt chromometer
D. None of these
Answer» B. Pensky-Martens apparatus
192.

Naphtha yield in straight run distillation of crude oil may be about __________ percent.$?

A. 2
B. 6
C. 12
D. 18
Answer» C. 12
193.

The general formula of naphthenes is$?

A. CnH2n + 2
B. CnH2n - 6 (where, n ‚â• 6)
C. CnHn - 4
D. Same as that for olefins i.e. CnH2n
Answer» C. CnHn - 4
194.

Smoke point of kerosene is the$?

A. Time after which smoking starts on burning
B. Temperature at which smoking starts
C. Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp
D. None of these
Answer» C. Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp
195.

Cracking is$?

A. An exothermic reaction
B. An endothermic reaction
C. Favoured at very low temperature
D. None of these
Answer» C. Favoured at very low temperature
196.

Which of the following has maximum hydrogen/carbon ratio (by weight)?$?

A. Naphtha
B. Gasoline
C. Diesel
D. Fuel oil
Answer» C. Diesel
197.

Crude topping column operates at __________ pressure.$?

A. Atmospheric
B. 10 atm
C. Vacuum
D. 3 atm
Answer» B. 10 atm
198.

Water separometer index (modified) (WSIM) of a petrofuel is the measure of its$?

A. Emulsification tendency
B. Water separation characteristics
C. Water content
D. Water absorbing capacity from atmosphere
Answer» C. Water content
199.

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of$?

A. Thermal cracking
B. Gum formation
C. Coking
D. Discoloration
Answer» D. Discoloration
200.

Octane number of gasoline is a measure of its$?

A. Resistance to knock
B. Ignition delay
C. Ignition temperature
D. Smoke point
Answer» B. Ignition delay