Explore topic-wise MCQs in Unit Processes.

This section includes 2114 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.

1751.

To apply metal mask plate for AJMM, magnetic clamps are used.

A. True
B. False
Answer» B. False
1752.

What type of cleavage is shown by mica group?

A. Perfect cubic cleavage
B. Perfect octahedral cleavage
C. Perfect basal cleavage
D. Prismatic cleavage
Answer» D. Prismatic cleavage
1753.

Marshaller for Castor:-

A. org.springframework.oxm.jaxb.Jaxb1Marshaller
B. org.springframework.oxm.jaxb.Jaxb2Marshaller
C. org.springframework.oxm.castor.CastorMarshall
D. org.springframework.oxm.xmlbeans.XmlBeansMarshaller
Answer» D. org.springframework.oxm.xmlbeans.XmlBeansMarshaller
1754.

For ____ columns, the slenderness ratio is more than 32 and less than 120.

A. Long
B. Short
C. Average
D. Medium
Answer» E.
1755.

Which of the following represents ‘inhibit’ gate?$

A. AND gate
B. NAND gate
C. OR gate
D. NOR gate
Answer» B. NAND gate
1756.

What is the purpose of the property width belonging to the ImageData element?

A. Number of data
B. Number of pixels
C. Number of pixels per row of data
D. All of the mentioned
Answer» D. All of the mentioned
1757.

The number of trips (N) in a 8-hour working day is calculated by the formula __________

A. N=8/(2L/S+5/8)
B. N=8/(2L/S+3/4)
C. N=8/(2L/S+8/4)
D. N=8/(2L/S+3/9)
Answer» C. N=8/(2L/S+8/4)
1758.

In Smith–Waterman algorithm, in initialization Step, the _________ row and ________ column are subject to gap penalty.$

A. first, first
B. first, second
C. second, First
D. first, last
Answer» B. first, second
1759.

What temperature gives maximum fatigue strength of steels?

A. Below 100ÀöC
B. 100-200ÀöC
C. 200-400ÀöC
D. 500-600ÀöC
Answer» D. 500-600‚àö√Ñ‚àö‚àÇC
1760.

API management system creates __________ identity.

A. Secure
B. Friendly
C. Robust
D. Secure and friendly
Answer» E.
1761.

Which is the recent difficulty added to the starting systems?

A. Fuel flow
B. Gear transmissions
C. Electronic controls
D. Fuel consumption
Answer» D. Fuel consumption
1762.

For drawing parallel perspective view we use the _____vanishing point.

A. one
B. two
C. three
D. four
Answer» B. two
1763.

For enhancement of processor performance, beyond one instruction per cycle, the computer architects employ the technique of

A. super pipelined technique
B. multiple instruction issue
C. super pipelined technique and multiple instruction issue
D. none of the mentioned
Answer» C. super pipelined technique and multiple instruction issue
1764.

The internal loading can be found by ________________________

A. Distributed load method
B. Method of area
C. Method of line
D. Method of volume
Answer» B. Method of area
1765.

What happens to the inductance as the area of the cross section of the coil increases?

A. Increases
B. Decreases
C. Remains the same
D. Becomes zero
Answer» B. Decreases
1766.

Gabriel’s phthalimide synthesis is used for the preparation of which amine?$

A. Primary aromatic amine
B. Secondary amine
C. Primary aliphatic amine
D. Tertiary amine
Answer» D. Tertiary amine
1767.

Whole milk contains _____ percent protein.

A. 1.5-2.5
B. 2.5-3.5
C. 3.5-4.0
D. 4.0-4.5
Answer» D. 4.0-4.5
1768.

In case of partially prestressed members cracks of limited width are permissible under:

A. Deflection loads
B. Working loads
C. Tensile loads
D. Compressive
Answer» C. Tensile loads
1769.

What does a shift up and right in the curves of isopreference curve simply means? Verify in terms of N (number of pixels) and k (L=2k, L is the gray level) values.

A. Smaller values for N and k, implies a better picture quality
B. Larger values for N and k, implies low picture quality
C. Larger values for N and k, implies better picture quality
D. Smaller values for N and k, implies low picture quality
Answer» D. Smaller values for N and k, implies low picture quality
1770.

The pump that converts mechanical energy into hydraulic energy is called as _________

A. Turbomachinery
B. Centrifugal pump
C. Aerodynamics
D. Auto pump
Answer» C. Aerodynamics
1771.

The accuracy in the location of the objects depends upon the accuracy in laying the ________

A. Check line
B. Base line
C. Tie line
D. Survey line
Answer» B. Base line
1772.

Which of the following cannot show a vibrational absorption spectrum?

A. OCS
B. H<sub>2</sub>O
C. CO <sub>2</sub>
D. C H<sub>2</sub> = C H<sub>2</sub>
Answer» E.
1773.

A document that specifies how many times and with what data the program must be run in order to thoroughly test it.

A. addressing plan
B. test plan
C. validation plan
D. verification plan
Answer» C. validation plan
1774.

What does the AUTO_INCREMENT sequences normally begin at?

A. 0
B. 1
C. -1
D. 2
Answer» C. -1
1775.

In _____________ method, it is assumed that a property loses its value by the same amount every year.

A. Sinking fund
B. Operating Cost
C. Constant percentage
D. Straight line
Answer» E.
1776.

At the instant of starting, when a DC motor is put on supply, it will behave like ______________

A. Highly resistive circuit
B. Low resistance circuit
C. Capacitive circuit
D. Inductive circuit
Answer» C. Capacitive circuit
1777.

Choose the wrong one out for insertion sequence.

A. Insertion sequences are transposons
B. Insertion sequences range from 5kb to 30kb
C. Insertion sequences only carry genes for their transposition
D. Insertion sequences have terminal IR
Answer» C. Insertion sequences only carry genes for their transposition
1778.

In a multicomponent operation, i and j are

A. Variables of flow
B. Component and stage
C. Reflux and Boil up
D. Feed ratio
Answer» C. Reflux and Boil up
1779.

For the construction of gene libraries, which of the following sequence is not used?

A. BamHI
B. BglII
C. BelI
D. EcoR1
Answer» E.
1780.

Fuel cells offer an excellent method for the use of the _________

A. Chemicals
B. Fossil fuels
C. Bio fuels
D. Any fuels
Answer» C. Bio fuels
1781.

______ is used for transmission of packets in the cellular switched architecture.

A. Packet switching techniques
B. Circuit switching techniques
C. Packet and circuit switched technique
D. Datagram technique
Answer» B. Circuit switching techniques
1782.

Which of the following is not a step of data-loss prevention?

A. Identify
B. Manage
C. Classify
D. Discover
Answer» C. Classify
1783.

The ___________ keyword begins the declaration of attributes that an element may take. It is followed by the name of the element in question, a list of attribute definitions, and a closing.

A. DOCTYPE
B. ATTLIST
C. DTD
D. SGML
Answer» B. ATTLIST
1784.

For adding a new user to the system, we have to use ____ command.

A. grpadd
B. useradd
C. uadd
D. adduser
Answer» C. uadd
1785.

Phototransistors based on hetero-junction using _________ material are known as waveguide phototransistors.

A. InGaP
B. InGaAs
C. InGaAsP/ InAlAs
D. ErGaAs
Answer» D. ErGaAs
1786.

Which of the following is NOT an endonuclease?

A. Mung bean nuclease
B. S1 nuclease
C. Terminal deoxynucleotidal transferase
D. RNase A
Answer» D. RNase A
1787.

The tendency of charge carriers to move from a region of heavily concentrated charges to region of less concentrated charge is known as.

A. Depletion current
B. Drain current
C. Diffusion current
D. Saturation current
Answer» D. Saturation current
1788.

Who is the father of endocrinology?

A. R H Whittakar
B. Pasteur
C. Thomas Addison
D. Einthoven
Answer» D. Einthoven
1789.

Compaction factor for a heavily reinforced section with vibration is:

A. <0.75
B. 0.75-0.85
C. 0.85-0.92
D. >0.92
Answer» D. >0.92
1790.

In what conditions are the parts kept before welding in ultrasonic welding method?

A. Low static pressure
B. High static pressure
C. Low moving pressure
D. High moving pressure
Answer» B. High static pressure
1791.

The Convolution of the continuous functions f(t)=e-t2 and g(t)=3t2 is 5.312t2.

A. True
B. False
Answer» C.
1792.

The RNA polymerase can remove only the incorrect bases from the nascent RNA.

A. True
B. False
Answer» C.
1793.

In nominal-T method of solution of medium transmission line, capacitance is assumed to be __________

A. Distributed uniformly from sending end to receiving end
B. Lumped at the load end
C. Lumped at the generation end
D. Lumped at middle of generation and load end
Answer» E.
1794.

What is the frequency range of the sound used for ultrasound diathermy?

A. 0.1 – 0.7 MHz
B. 0.7 – 3.3 MHz
C. 3.3 – 5 MHz
D. 5 – 15 MHz
Answer» C. 3.3 ‚Äö√Ñ√∂‚àö√ë‚àö¬® 5 MHz
1795.

Atomisation or ionisation occurs at which of the following conditions?

A. Vacuum pressure
B. Atmospheric pressure
C. Low pressure
D. High pressure
Answer» E.
1796.

Which model of SystemC uses floating point numbers to denote time?

A. SystemC 1.0
B. SystemC 2.0
C. SystemC 3.0
D. SystemC 4.0
Answer» B. SystemC 2.0
1797.

The beginning and end of the maximal length sequence can be determined using

A. AND gate
B. NAND gate
C. AND or NAND gate
D. both AND and NAND gate
Answer» D. both AND and NAND gate
1798.

Which of the following is not a method for the preparation of Alkylamines?

A. Ammonolysis of alcohols
B. Hydroammonolysis of alcohols
C. Hydroammonolysis of aldehydes
D. None of the mentioned
Answer» E.
1799.

Signal varying randomly with time, with no definite period and amplitude is

A. periodic
B. transient
C. random
D. none of the mentioned
Answer» D. none of the mentioned
1800.

Time required for an insulation to reach at end is given by __________________

A. Kirchhoff
B. Joule
C. Ampere
D. Arrhenius
Answer» E.