

MCQOPTIONS
Saved Bookmarks
This section includes 2114 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.
1651. |
In op-amp IC negative saturation is defined by______________ |
A. | Logic High |
B. | Logic Low |
C. | Inverter |
D. | None of the mentioned |
Answer» C. Inverter | |
1652. |
For the removal of nitrogen completely through Activated Sludge Process (ASP) what would be the Solid retention time considered? |
A. | 3-18 days |
B. | 1-2 days |
C. | 12 hours |
D. | 18 hours |
Answer» C. 12 hours | |
1653. |
What is the purpose of the adoptNode() method? |
A. | Removes node |
B. | Makes it ready for insertion |
C. | Removes node and Makes it ready for insertion |
D. | None of the mentioned |
Answer» D. None of the mentioned | |
1654. |
Knowing the number of trips, the total distance run both ways in km is equal to 2N+6. |
A. | True |
B. | False |
Answer» B. False | |
1655. |
Local sequence alignments are necessary for many cases out of which one is repeats. |
A. | True |
B. | False |
Answer» B. False | |
1656. |
Which property is enhanced by strain ageing? |
A. | Tensile strength |
B. | Ductility |
C. | Stiffness |
D. | Yield strength |
Answer» E. | |
1657. |
Web applications support ___________ API. |
A. | RESTful |
B. | RESful |
C. | Class |
D. | Lua |
Answer» B. RESful | |
1658. |
If the starter is used properly, for how many starts will it last? |
A. | About 8000 |
B. | Over 10000 |
C. | Upto 40000 |
D. | At least 25000 |
Answer» C. Upto 40000 | |
1659. |
The drawing in which we use the two vanishing point the view is called _________ |
A. | Parallel perspective view |
B. | Perpendicular perspective view |
C. | Angular perspective view |
D. | Perspective view |
Answer» D. Perspective view | |
1660. |
Which of the following is a class of architecture of MII (multiple instruction issue)? |
A. | super pipelined architecture |
B. | multiple instruction issue |
C. | very small instruction word architecture |
D. | super scalar architecture |
Answer» E. | |
1661. |
What happens to the inductance as the length of the magnetic circuit increases? |
A. | Increases |
B. | Decreases |
C. | Remains the same |
D. | Becomes zero |
Answer» C. Remains the same | |
1662. |
Which of the following is not an objective of milk evaluation? |
A. | Determining the presence of desirable characteristics |
B. | Determining one brand of milk from another |
C. | Determining if one sample differs from another |
D. | Determining presence and magnitude of undesirable characteristics |
Answer» C. Determining if one sample differs from another | |
1663. |
The additional constraints are imposed on the geometrical dimensions of: |
A. | Cross section |
B. | Edges |
C. | Corners |
D. | Ranges |
Answer» B. Edges | |
1664. |
How does the curves behave to the detail in the image in isopreference curve? |
A. | Curves tend to become more vertical as the detail in the image decreases |
B. | Curves tend to become less vertical as the detail in the image increases |
C. | Curves tend to become less vertical as the detail in the image decreases |
D. | Curves tend to become more vertical as the detail in the image increases |
Answer» E. | |
1665. |
What type of flow does the reciprocating pump have? |
A. | Uniform |
B. | Continuous |
C. | Pulsating |
D. | Non-uniform |
Answer» C. Pulsating | |
1666. |
Survey stations must be mutually visible to obtain a good system of line. |
A. | True |
B. | False |
Answer» B. False | |
1667. |
Which of the following is not a type of bending molecular vibration? |
A. | Twisting |
B. | Stretching |
C. | Wagging |
D. | Rocking |
Answer» C. Wagging | |
1668. |
An approach that designs test cases by looking at the allowable data values. |
A. | Maintenance |
B. | Evaluation |
C. | Data coverage |
D. | Validation |
Answer» D. Validation | |
1669. |
How can the value of recently generated sequence number be obtained? |
A. | LAST_INSERT_ID() |
B. | LATEST_INSERT_ID() |
C. | INITIAL_INSERT_ID() |
D. | INSERT_ID() |
Answer» B. LATEST_INSERT_ID() | |
1670. |
In _____________ method, it is assumed that a property will lose its value by a constant percentage of its value and the beginning of every year. |
A. | Sinking fund |
B. | Constant percentage |
C. | Straight line |
D. | Operating Cost |
Answer» C. Straight line | |
1671. |
All others are advantages of DC motor over AC motor except _______________ |
A. | Low cost |
B. | Wide speed range |
C. | Stability |
D. | High starting torque |
Answer» B. Wide speed range | |
1672. |
In an experiment you develop immune response in mice against salmonella flagellar antigen. However, you observe the infection still persisted. Which if a likely possibility if immune system is functioning properly? |
A. | Salmonella shed its flagella |
B. | The antigen lost its specificity gradually |
C. | The flagella antigen changed |
D. | Infection was not due to salmonella |
Answer» D. Infection was not due to salmonella | |
1673. |
MESH stands for? |
A. | Material, equilibrium, summation and heat |
B. | Mass, equilibrium, simulation and heat |
C. | Makeup, equilibrium, subject and heat |
D. | Material, equilibrium, summation and Height |
Answer» B. Mass, equilibrium, simulation and heat | |
1674. |
Which of the following is most visible benefit of user-defined function ? |
A. | Slow performance |
B. | Bad optimized queries |
C. | Faster performance |
D. | All of the mentioned |
Answer» D. All of the mentioned | |
1675. |
Promoters in Streptomyces can be _______ during gene cloning. |
A. | Lost |
B. | Decreased |
C. | Increased |
D. | Inactivated |
Answer» B. Decreased | |
1676. |
The life time of the fuel cells is __________ |
A. | 10 years |
B. | 20 years |
C. | 30 years |
D. | Not known |
Answer» E. | |
1677. |
Which of the following has the function to accept information from PSTN? |
A. | TIU |
B. | WIU |
C. | BIU |
D. | CIU |
Answer» B. WIU | |
1678. |
Mapping of data-flow in an organization is very useful in understanding the risk better due to actual & potential data leakage. |
A. | True |
B. | False |
Answer» B. False | |
1679. |
The __________ begins with a series of parameter entity definitions. |
A. | DTD |
B. | SGML |
C. | XML |
D. | HTML |
Answer» B. SGML | |
1680. |
All the user information is stored in _____ |
A. | etc/passwd |
B. | bin/passwd |
C. | bin/users/passwd |
D. | etc/shadow |
Answer» B. bin/passwd | |
1681. |
A phototransistor has collector current of 18 mA, incident optical power of 128 μW with a wavelength of 1.24 μm. Determine an optical gain.$ |
A. | 1.407 *10<sup>2</sup> |
B. | 19.407 *10<sup>2</sup> |
C. | 2.407 *10<sup>2</sup> |
D. | 3.407 *10<sup>2</sup> |
Answer» B. 19.407 *10<sup>2</sup> | |
1682. |
Which of the following endonuclease has been purified from Aspergillus oryzae? |
A. | S1 nuclease |
B. | RNase H |
C. | RNase A |
D. | Mung bean nuclease |
Answer» B. RNase H | |
1683. |
If the drift current is 100mA and diffusion current is 1A what is the total current in the semiconductor diode. |
A. | 1.01 A |
B. | 1.1 A |
C. | 900m A |
D. | 10 A |
Answer» C. 900m A | |
1684. |
Stress hormone is __________ |
A. | Oxytocin |
B. | Adrenaline |
C. | Vasopressin |
D. | Sex hormone |
Answer» C. Vasopressin | |
1685. |
The result of Vee-Bee test is expressed in terms of: |
A. | s |
B. | m |
C. | N/mm<sup>2</sup> |
D. | kg |
Answer» B. m | |
1686. |
What is the maximum thickness that can be welded in ultrasonic welding? |
A. | 1.8 mm |
B. | 2.1 mm |
C. | 2.3 mm |
D. | 2.5 mm |
Answer» E. | |
1687. |
What is the difference between convolution and multiplication? |
A. | Convolution leads to addition and multiplication leads to the multiplication |
B. | Convolution leads to a superposition of signals while multiplication does not consider all the signals |
C. | Convolution is multiplication but of signals |
D. | Convolution is a multiplication of added signals. |
Answer» C. Convolution is multiplication but of signals | |
1688. |
The Gre factor enhances the hydrolytic editing function of the polymerase. |
A. | True |
B. | False |
Answer» B. False | |
1689. |
In nominal-π method of solution of medium transmission line, capacitance is assumed to be:$ |
A. | Distributed uniformly from sending end to receiving end |
B. | Divided into two halves |
C. | Lumped at the generation end |
D. | Lumped at middle of generation and load end |
Answer» C. Lumped at the generation end | |
1690. |
What precaution is used in diathermy? |
A. | the patient is made to lie on a soft pillow |
B. | pads are used for grounding and completing the circuit |
C. | the patient is made to drink a large number of fluids |
D. | wooden blocks are used for grounding |
Answer» C. the patient is made to drink a large number of fluids | |
1691. |
Ions flow is pumped into the vacuum system using which of the following? |
A. | Orifice |
B. | Nozzle |
C. | Venturi meter |
D. | Dall tube |
Answer» B. Nozzle | |
1692. |
.infinite |
A. | 5hello5hello5hello5hello5hello…..infinite |
B. | no output |
C. | error |
Answer» B. no output | |
1693. |
Which of the following is called for the adsorbing the molecules? |
A. | Adsorbate |
B. | Adsorbent |
C. | Absobate |
D. | None of the mentioned |
Answer» C. Absobate | |
1694. |
Which model of SystemC uses the integer number to define time? |
A. | SystemC 1.0 |
B. | SystemC 2.0 |
C. | SystemC 3.0 |
D. | SystemC 4.0 |
Answer» C. SystemC 3.0 | |
1695. |
Preloading different starting value for the LFSR is called as |
A. | seeding |
B. | reseeding |
C. | deseeding |
D. | pre-seeding |
Answer» C. deseeding | |
1696. |
What are the requirements to control the production of specific amines? |
A. | Ratio of reactants |
B. | Operating conditions |
C. | Specific catalyst |
D. | All of the mentioned |
Answer» E. | |
1697. |
For asymptotes passing from breakaway point then this point is also centroid |
A. | True |
B. | False |
Answer» B. False | |
1698. |
_____________ is the output response of an instrument to various types of dynamic input signals obtained by solving its governing equation relating output and input. |
A. | Periodic |
B. | Dynamic response |
C. | Random |
D. | None of the mentioned |
Answer» C. Random | |
1699. |
Arrhenius law is given by ___________________ |
A. | L=αβT |
B. | L=αβ/T |
C. | L=α+βT |
D. | L=α+β/T |
Answer» E. | |
1700. |
Determine the amount of cement per unit volume of concrete from ______________ |
A. | Slump value |
B. | The maximum size of aggregate |
C. | The amount of mixing water |
D. | The maximum size of aggregate and the amount of mixing water |
Answer» E. | |