Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Ideally, architects of houses design rooms to meet the needs of the people who will live in the house, this is known as __________?

A. planning
B. layout
C. finishing
D. interior design
Answer» E.
2.

One of the challenges in SWA is obtaining correct alignments in regions of low similarity between distantly related biological sequences?

A. True
B. False
Answer» B. False
3.

A material is a fatigue tested below the fatigue limit for few millions of cycles and then retested at higher than fatigue limit. This process is known as __________?

A. Under stressing
B. Coaxing
C. Bridging
D. Toughening
Answer» C. Bridging
4.

WiFi uses how much frequency?

A. 2.2GHz
B. 3GHz
C. 3.5GHz
D. 2.4GHz
Answer» E.
5.

What is CDI?

A. Common diesel injection
B. Common direct injection
C. Capacitor discharge ignition
D. Capacitor direct ignition
Answer» D. Capacitor direct ignition
6.

If one specified point P1 first and then point P2, the line passing through P2 to infinity and starting from P1 is called as _______?

A. Line
B. Segment
C. Ray
D. 2-point line
Answer» D. 2-point line
7.

The architecture in which the hardware decides which instructions are to be issued concurrently at run time i?

A. super pipelined architecture
B. multiple instruction issue
C. very long instruction word architecture
D. superscalar architecture
Answer» E.
8.

A _____ cup is a cup with fine wire mesh on top used to detect the presence of abnormal milk?

A. Striated
B. Mesh
C. Streak
D. Strip
Answer» E.
9.

Which elements were standardized and tabulated for design office use?

A. Bridge girders
B. Span Girders
C. Foundation girders
D. Transverse girders
Answer» B. Span Girders
10.

What is a band-limited function?

A. A function of limited duration whose highest frequency is finite
B. A function of limited duration whose highest frequency is infinite
C. All of the mentioned
D. None of the mentioned
Answer» B. A function of limited duration whose highest frequency is infinite
11.

Why can’t rotary pumps non-lubricate water?#

A. Because it has lesser viscosity
B. Because it contains abrasive particles
C. Multistage pumps are difficult to operate
D. Draft tube is thin
Answer» C. Multistage pumps are difficult to operate
12.

Each triangle or portion of a skeleton must be provided with sufficient tie lines to obtain good system of lines?

A. True
B. False
Answer» C.
13.

Presence of a functional group in a compound can be established by usin?

A. Chromatography
B. IR spectroscopy
C. Mass spectroscopy
D. X-ray diffraction
Answer» C. Mass spectroscopy
14.

A program that reads each of the instructions in mnemonic form and translates it into the machine-language equivalent?

A. Machine language
B. Assembler
C. Interpreter
D. C program
Answer» C. Interpreter
15.

Triggers are not supported for ____________?

A. delete
B. update
C. insert
D. views
Answer» E.
16.

In ______________, the owner has to invest a certain amount for the purchase of an equipment?

A. Cost depreciation
B. Investment charges
C. Operation cost
D. Management
Answer» C. Operation cost
17.

Torque developed by a DC motor depends upon ____________?

A. magnetic field
B. active length of the conductor
C. current flow through the conductors
D. Current, active length, no. of conductors, magnetic field all
Answer» E.
18.

Which of the following transpose using RNA intermediate?

A. Class I transposon
B. Class II transposon
C. Class III transposon
D. Class IV transposon
Answer» B. Class II transposon
19.

Murphree equation is used for calculating?

A. Stage calculation
B. Equilibrium condition
C. Reflux ratio
D. Tray efficiency
Answer» E.
20.

When to choose scalar function over inline table valued function ?

A. You want a single value as the result
B. One or more row’s worth of data is expected
C. You want multiple values as result
D. All of the mentioned
Answer» B. One or more row‚Äö√Ñ√∂‚àö√ë‚àö¬•s worth of data is expected
21.

Streptomyces genes are difficult to express in ________?

A. Mammals
B. E.coli
C. Bacillus
D. Streptococcus
Answer» C. Bacillus
22.

In methyl alcohol-oxygen alkaline fuel cell ___________ is used as the fuel?

A. CH<sub>3</sub>OH
B. CH<sub>3</sub>COOH
C. O<sub>2</sub>
D. O<sub>3</sub>
Answer» B. CH<sub>3</sub>COOH
23.

_______ is the information contained in the packet header of TIU?

A. PTI
B. VCI
C. PRMA
D. CDPD
Answer» C. PRMA
24.

Data leakage threats are done by internal agents. Which of them is not an example of an internal data leakage threat?

A. Data leak by 3rd Party apps
B. Data leak by partners
C. Data leak by employees
D. Data leak from stolen credentials from the desk
Answer» B. Data leak by partners
25.

A model group contains the names of the elements that a tag may enclose?

A. True
B. False
Answer» B. False
26.

Which command is used by the administrator to modify some parameters of existing users?

A. userdel
B. userchange
C. useradd
D. usermod
Answer» E.
27.

The detection mechanism in the ____________ photo-detector includes inter sub-band transitions?

A. Dwell
B. Set
C. Avalanche
D. Futile
Answer» B. Set
28.

Which of the following is NOT the property of restriction enzymes?

A. Recognizes palindromic sequences
B. Two fold axial symmetry
C. Recognize specific site according to DNA sources
D. Cut down randomly
Answer» D. Cut down randomly
29.

The drift velocity is 5V and the applied electric field intensity 20v/m what will be the mobility of charge carriers?

A. 100 m<sup>2</sup>/ (vs)
B. 4 m<sup>2</sup>/ (vs)
C. 15 m<sup>2</sup>/ (vs)
D. 0.25 m<sup>2</sup>/ (vs)
Answer» E.
30.

Which part of the ovary of mammals acts as endocrine gland after copulation?

A. Stroma
B. Graaffian follicle
C. Vitelline membrane
D. Germinal epithelium
Answer» C. Vitelline membrane
31.

Concrete is filled in how many layers in slump cone in slump test?

A. 3
B. 2
C. 6
D. 4
Answer» E.
32.

Convolution is considered in case of _______?

A. Discrete time systems only
B. Continuous time only
C. In both continuous time and discrete time
D. Superposition of various outputs
Answer» D. Superposition of various outputs
33.

Which of these are included in detailed design specification?

A. Packaging and Implementation
B. Interface
C. Algorithms and Data Structures
D. All of the mentioned
Answer» E.
34.

For the removal of phosphorous through Activated Sludge Process (ASP) what would be the Solid retention time considered?

A. 18 hours
B. 1-2 days
C. 10 hrs
D. 2-4 days
Answer» E.
35.

The Gre factor is homologous to the eukaryotic factor _____________

A. TFIIB
B. TFIIH
C. DPE
D. TFIIS
Answer» E.
36.

Which of the following is not a method for solution of medium transmission line?

A. End condenser method
B. Nominal-T method
C. Nominal-π method
D. Nominal-H method
Answer» E.
37.

Which of the following is used to measure the biological damage caused by radiation?

A. Curie
B. Rem
C. Rad
D. Roentgens
Answer» C. Rad
38.

ICP spectrometer is a sequential multi-element analyser that has scan times less than ____

A.
B. 10ms
C. 20ms
Answer» C. 20ms
39.

Which of the following is called for the curves following isothermal adsorbtion?

A. Adsorbtion isotherm
B. Adsorbate isotherm
C. Adsorbent isotherm
D. Absorbent isotherm
Answer» B. Adsorbate isotherm
40.

Which C++ class is similar to the hardware description language like VHDL?

A. SystemC
B. Verilog
C. C
D. JAVA
Answer» B. Verilog
41.

The total number of runs is given mathematically as

A. 2<sup>n</sup>
B. 2<sup>(n-1)</sup>
C. 2<sup>(n+1)</sup>
D. 2<sup>n</sup>-1
Answer» C. 2<sup>(n+1)</sup>
42.

The amination of alkyl halides produce which type of amines?

A. Primary
B. Secondary
C. Tertiary
D. All of the mentioned
Answer» E.
43.

_____________ is an instrument having no dynamic error and no time lag of measurement.

A. Frequency response
B. Dynamic response
C. First order response
D. None of the mentioned
Answer» D. None of the mentioned
44.

Relative age rating is ___________________

A. 2<sup>(θ – 98)</sup> * 6
B. 2<sup>(θ – 98)</sup> – 6
C. 2<sup>(θ – 98)</sup> / 6
D. 2<sup>(θ – 98)</sup>
Answer» D. 2<sup>(‚âà√≠‚Äö√†√® ‚Äö√Ñ√∂‚àö√ë‚àö¬® 98)</sup>
45.

The lower the w/c ratio, ________ the strength of concrete

A. Higher
B. Lower
C. Poor
D. Moderate
Answer» B. Lower
46.

What is the representative factor if the length of the drawing is 15mm and the actual length of the object is 3m?

A. 1:2
B. 1:0.2
C. 1:200
D. 1:20
Answer» D. 1:20
47.

The VDF in hilly terrain for CVPD less than 1500 is

A. 1
B. 1.5
C. 2.0
D. 2.5
Answer» C. 2.0
48.

Modern day calorimeters and spectrophotmetry instruments use ________ light source.

A. Tungsten-halogen lamp
B. Xenon-mercury lamp
C. Deuterium discharge lamp
D. Mercury arc
Answer» E.
49.

Stabilisation and solidification treatment can be applied for liquid waste. True or False.

A. True
B. False
Answer» B. False
50.

The _________ is a line graph where the x-axis is the independent variable and the y-axis is the process control parameter or variable. The kappa number of pulp going to the bleach plant.

A. Control chart
B. Pareto charts
C. Student’s
D. SPC
Answer» B. Pareto charts